Dynamic parametric modeling-based model updating strategy of aeroengine casings

For accurate Finite Element (FE) modeling for the structural dynamics of aeroengine casings, Parametric Modeling-based Model Updating Strategy (PM-MUS) is proposed based on efficient FE parametric modeling and model updating techniques regarding uncorrelated/correlated mode shapes. Casings structure is parametrically modeled by simplifying initial structural FE model and equivalently simulating mechanical characteristics. Uncorrelated modes between FE model and experiment are reasonably handled by adopting an objective function to recognize correct correlated modes pairs. The parametrized FE model is updated to effectively describe structural dynamic characteristics in respect of testing data. The model updating technology is firstly validated by the detailed FE model updating of one fixed–fixed beam structure in light of correlated/uncorrelated mode shapes and measured mode data. The PM-MUS is applied to the FE parametrized model updating of an aeroengine stator system (casings) which is constructed by the proposed parametric modeling approach. As revealed in this study, (A) the updated models by the proposed updating strategy and dynamic test data is accurate, and (B) the uncorrelated modes like close modes can be effectively handled and precisely identify the FE model mode associated the corresponding experimental mode, and (C) parametric modeling can enhance the dynamic modeling updating of complex structure in the accuracy of mode matching. The efforts of this study provide an efficient dynamic model updating strategy (PM-MUS) for aeroengine casings by parametric modeling and experimental test data regarding uncorrelated modes.     

分布式动力系统尾缘射流与边界层抽吸的数值分析

为研究带有边界层抽吸的分布式动力系统尾缘射流对机身气动性能及推进效率的影响,将机身简化为二维翼型,并加入尾缘射流及边界层抽吸的作用,利用数值模拟的手段来研究来流攻角、射流偏转角、边界层抽吸对推进效率及气动性能的影响,为分布式动力系统的设计与应用提供初步的建议.结果表明在中、小来流攻角(2°及0.6°)的情况下尾缘射流及边界层抽吸能够提高升阻比,推进效率可超过80%;而在大来流攻角(4°)情况下射流偏转角增大使翼型的阻力大幅上升,对气动性能和推进效率产生极为不利的影响.      

翼伞系统纵向飞行性能分析

翼伞系统的飞行性能不仅取决于翼伞本身的气动特性,而且与安装角、伞绳长度、回收物阻力特征、翼载荷等系统参数密切相关。文章应用拉格朗日方程建立翼伞系统的纵向飞行力学模型,对翼伞系统进行飞行力学数值仿真,深入分析了系统参数以及开伞状态对翼伞系统纵向飞行性能的影响规律。结果表明：只有安装角在0°～20°时,翼伞系统才能达到稳定的滑翔状态,且安装角在4°～6°时对应两个稳定的滑翔状态,具体由开伞姿态和速度决定;伞绳特征长度的增加使系统的静稳定性增加;回收物的阻力特征增加6m2,翼伞系统的稳定滑翔角增加15°左右,而迎角减小不到1°;翼伞飞行速度随着翼载荷的增加而增加,其平方与回收物质量成正比。上述结论可为翼伞系统的工程实际应用提供参考。     

基于动力学递推算法的绳系卫星系统刚柔耦合多体模型

利用动力学递推算法建立了空间绳系卫星系统(TSS)的铰接柔性杆动力学模型.所研究的绳系系统包含两颗刚体绳端卫星和一段连接两颗卫星的柔绳,柔绳离散为一系列球铰连接的弹性杆,考虑杆不均匀的纵向一维形变,并利用球铰的运动模拟柔绳的弯曲和扭转;然后基于递推算法推导得出了该刚柔混合离散模型的动力学方程.数值仿真结果表明:所建立的绳系卫星系统模型能够很好地模拟空间系绳的各向摆振和扭转,此外,递推算法的引入能够有效地减少离散模型动力学方程的维数,从而大幅减少计算量.      

Recent active thermal management technologies for the development of energy-optimized aerospace vehicles in China

Recently, the development of modern vehicles has brought about aggressive integration and miniaturization of on-board electrical and electronic devices. It will lead to exponential growth in both the overall waste heat and heat flux to be dissipated to maintain the devices within a safe temperature range. However, both the total heat sinks aboard and the cooling capacity of currently utilized thermal control strategy are severely limited, which threatens the lifetime of the on-board equipment and even the entire flight system and shrink the vehicle’s flight time and range. Facing these thermal challenges, the USA proposed the program of “INVENT” to maximize utilities of the available heat sinks and enhance the cooling ability of thermal control strategies. Following the efforts done by the USA researchers, scientists in China fought their ways to develop thermal management technologies for Chinese advanced energy-optimized airplanes and spacecraft. This paper elaborates the available on-board heat sinks and aerospace thermal management systems using both active and passive technologies not confined to the technology in China. Subsequently, active thermal management technologies in China including fuel thermal management system, environment control system, non-fuel liquid cooling strategy are reviewed. At last, space thermal control technologies used in Chinese Space Station and Chang’e-3 and to be used in Chang’e-5 are introduced. Key issues to be solved are also identified, which could facilitate the development of aerospace thermal control techniques across the world.     

基于内模原理的复杂挠性卫星姿态控制研究

首先对具有运动挠性附件的航天器的姿态动力学模型进行了简要讨论和分析,证明了对于受步进扰动的复杂挠性卫星系统,采用输出反馈PD控制仅能得到一致有界稳定的结论。为了获得闭环系统的渐近稳定性能,进一步构造了具有内模补偿的PD控制系统,并且根据Lyapunov理论给出了严格证明。基于美国GOES 8号静止轨道气象卫星公布的动力学参数,对PD控制及含有内模补偿的PD控制两类控制器进行了仿真对比,以校验所设计控制系统的有效性。最后,进行了总结并提出进一步的研究设想。     

Manifold dynamics in the Earth–Moon system via isomorphic mapping with application to spacecraft end-of-life strategies

Recently, manifold dynamics has assumed an increasing relevance for analysis and design of low-energy missions, both in the Earth–Moon system and in alternative multibody environments. With regard to lunar missions, exterior and interior transfers, based on the transit through the regions where the collinear libration points L₁ and L₂ are located, have been studied for a long time and some space missions have already taken advantage of the results of these studies. This paper is focused on the definition and use of a special isomorphic mapping for low-energy mission analysis. A convenient set of cylindrical coordinates is employed to describe the spacecraft dynamics (i.e. position and velocity), in the context of the circular restricted three-body problem, used to model the spacecraft motion in the Earth–Moon system. This isomorphic mapping of trajectories allows the identification and intuitive representation of periodic orbits and of the related invariant manifolds, which correspond to tubes that emanate from the curve associated with the periodic orbit. Heteroclinic connections, i.e. the trajectories that belong to both the stable and the unstable manifolds of two distinct periodic orbits, can be easily detected by means of this representation. This paper illustrates the use of isomorphic mapping for finding (a) periodic orbits, (b) heteroclinic connections between trajectories emanating from two Lyapunov orbits, the first at L₁, and the second at L₂, and (c) heteroclinic connections between trajectories emanating from the Lyapunov orbit at L₁ and from a particular unstable lunar orbit. Heteroclinic trajectories are asymptotic trajectories that travels at zero-propellant cost. In practical situations, a modest delta-v budget is required to perform transfers along the manifolds. This circumstance implies the possibility of performing complex missions, by combining different types of trajectory arcs belonging to the manifolds. This work studies also the possible application of manifold dynamics to defining suitable, convenient end-of-life strategies for spacecraft orbiting the Earth. Seven distinct options are identified, and lead to placing the spacecraft into the final disposal orbit, which is either (a) a lunar capture orbit, (b) a lunar impact trajectory, (c) a stable lunar periodic orbit, or (d) an outer orbit, never approaching the Earth or the Moon. Two remarkable properties that relate the velocity variations with the spacecraft energy are employed for the purpose of identifying the optimal locations, magnitudes, and directions of the velocity impulses needed to perform the seven transfer trajectories. The overall performance of each end-of-life strategy is evaluated in terms of time of flight and propellant budget.     

柔性绳网动力学建模与天地差异性分析

采用有限元模型研究了柔性绳网系统的动力学特性。针对空间绳网直接弹射展开方式,首先将绳网离散为若干单元,各单元处理为非线性“半阻尼弹簧”模型,然后分别计算各单元所受气动力和重力,最终建立绳网系统多柔体动力学模型。基于所建立的动力学模型分别对柔性绳网在地面和太空展开的动力学过程进行了仿真分析,研究了绳网在展开面积、空间位形和飞行距离等方面的天地差异性及其动力学机理,为未来空间绳网系统的分析设计提供理论参考。     

NEPE推进剂/衬层结构-性能MD模拟（Ⅱ）--复杂体系组分分子迁移和配方设计示例

用分子动力学( MD)方法,对( PEG/NG/BTTN)/NPBA/HMX/AP/PEG/N-100//HTPB/TDI复杂的推进剂/衬层模型体系进行295 K-NVT模拟研究,展示了组分分子的浓度分布和迁移状况,发现HMX和NPBA分子有向界面层迁移趋势,而AP则呈平均分布态势。以RDX等量取代HMX后所得新配方的MD模拟研究表明,前者拉伸模量( E)、体模量( K)和剪切模量( G)、柯西压( C12-C44)和K/G值均有明显下降,表明新配方的刚性、强度和延展性均有下降;新配方中引发键(N—NO2)最大键长(1.528?)明显大于原配方中相应值(1.503?),预示新配方感度增大、安全性将下降;比较RDX、HMX与其他组分之间的结合能,前者小于后者,预示新配方的相容性较差。     

激波引燃冲压发动机一体化流场数值模拟

激波引燃冲压发动机是一种采用爆轰形式组织燃烧的吸气式高超声速飞行器动力系统。采用AUSMPW+迎风格式、氢氧7组分8步基于反应模型,在非结构网格离散域上求解二维多组分化学非平衡流Euler方程。采用发展的数值方法求解了激波引燃冲压发动机内外一体化流场,研究了台阶长度、斜劈尖角度对发动机流场结构和发动机性能参数的影响规律。计算结果表明,所发展的数值方法能用于激波引燃冲压发动机的一体化流场和性能预示计算;台阶长度和斜劈尖角度影响发动机流场结构和预混气体能量释放程度。推力和燃料比冲均随台阶长度的增大而增大,随斜劈尖角度的增大而减少。