大型上单翼飞机机翼三维全场变形测量方案

针对大型上单翼飞机在飞行过程中机翼大挠度变形检测难题,提出了大倾角相机视场下机翼的非接触三维全场变形测量方案。根据上单翼飞机结构特点,将预先标定内参数和相机外参数的共轭相机组安装于飞机垂直尾翼上,采集飞行中的机翼变形图像。首先,提出了大倾角弱相关散斑匹配方法,解决了相机在大倾斜角度状态下采集到的机翼变形弱相关图像相关性差,难以相关匹配的问题。其次,由于测量相机安装于垂直尾翼,飞行测量过程中相机会受到气流扰动产生振动,本文提出了一种相机动态校正方法,通过在机背布置预拉伸刚性不动编码标志点,实时解算基准相机的绝对外参数,进而确定共轭相机的绝对外参数,实现所有测量相机外参数的动态校正。最后,开发了机翼变形全场测量软硬件系统,搭建了缩小比例机翼模型试验台并进行了仿真测量,对系统测量精度进行了比对分析。测量结果验证了本方案的有效性、可行性,对实机测量有一定的指导意义。     

基于近似技术的高亚声速运输机机翼气动/结构优化设计

探索基于近似技术的高亚声速运输机机翼气动/结构多学科设计优化方法,建立了基于近似技术的多学科设计优化框架。气动学科采用全速势方程加黏性修正进行翼身组合体跨声速流动的气动计算,结构学科采用有限元分析方法进行应力与变形计算。采用均匀设计法给出若干样本点,分别采用二次响应面、Kriging模型和径向基神经网络等多种近似技术,构造气动学科和结构学科的近似分析模型,并对几种近似模型精度进行了分析和比较。研究发现,Kriging模型和二次响应面具有几乎等同的较高的近似精度,神经网络的近似精度则较差,由于二次响应面计算量更小,故最终选定为机翼设计优化的近似方法。以升阻比和结构重量为目标,考虑升力、机翼面积以及应力和应变约束条件,对运输机机翼4个外形参数和4个结构参数进行多目标、多约束优化设计。优化后的机翼具有较好的气动/结构综合性能,表明本文方法是可行的。     

An analysis of low-frequency component in microacceleration measurements made onboard the <Emphasis Type="Italic">Foton M-2</Emphasis> satellite

The low-frequency component is investigated in the data of measurements performed onboard the Foton M-2 satellite with the three-component accelerometer TAS-3. Investigations consisted in comparison of this component with its calculated analog found from a reconstruction of the satellite’s attitude motion. The influence of the Earth’s magnetic field on the accelerometer readings is discovered by way of spectral analysis of the functions representing the results of determining the low-frequency microacceleration by two methods. After making correction for this influence, the results obtained by these two methods coincided within a root-mean-square error of less than 10^?6 m/s².     

单颗磨粒磨削仿真研究进展

概述了传统磨削仿真的基本方法及发展过程,总结了磨粒模型和工件模型的研究现状,具体分析了有限元法、光滑流体粒子动力学法、分子动力学法以及综合仿真方法等应用于单颗磨粒磨削材料的去除机理、成屑机理、工件表面质量以及磨粒磨损等仿真中的研究现状,最后阐述了各类仿真方法的局限性,并提出了单颗磨粒磨削仿真进一步的发展前景。     

A fast and automatic full-potential finite volume solver on Cartesian grids for unconventional configurations

To meet the requirements of fast and automatic computation of subsonic and transonic aerodynamics in aircraft conceptual design,a novel finite volume solver for full potential flows on adaptive Cartesian grids is developed in this paper.Cartesian grids with geometric adaptation are firstly generated automatically with boundary cells processed by cell-cutting and cell-merging algo rithms.The nonlinear full potential equation is discretized by a finite volume scheme on these Cartesian grids and iteratively solved in an implicit fashion with a generalized minimum residual (GMRES) algorithm.During computation,solution-based mesh adaptation is also applied so as to capture flow features more accurately.An improved ghost-cell method is proposed to implement the non-penetration wall boundary condition where the velocity-potential of a ghost cell is modified by an analytic method instead.According to the characteristics of the Cartesian grids,the Kutta condition is applied by specially computing the gradients on Kutta-faces without directly assigning the potential jump to cells adjacent wake faces,which can significantly improve the solution con verging speed.The feasibility and accuracy of the proposed method are validated by several typical cases of sub/transonic flows around an ONERA M6 wing,a DLR-F4 wing-body,and an unconventional figuration of a blended wing body (BWB).The validation cases demonstrate a fast convergence with fully automatic grid treatment and computation,and the results suggest its capacity in application for aircraft conceptual design.     

三维角联锁机织复合材料剪切性能有限元分析

使用三维绘图软件Pro/E 5.0构建出一种三层角联锁机织复合材料的细观结构模型,借助有限元软件ANSYS对复合材料在剪切力作用下纤维与树脂的应力、应变分布进行数值模拟,并借此分析该复合材料在剪切作用下的力学行为,并预测复合材料破坏模式。结果表明:复合材料在剪切力作用下发生沿剪切力方向程度较均匀的剪切变形;纤维相对于树脂承受更多剪切力作用,产生更大应力,但发生相对较小的应变;纤维中轴向与剪切力方向平行的经纱相对轴向垂直于剪切力的纬纱表现出更大的应力和应变。     

超临界机翼飞行验证机的增升装置设计

为进行超临界机翼气动设计技术的飞行验证,将某教练机改装为飞行验证机,为此必须进行增升装置的重新设计。在保持原型机襟翼平面参数和运动机构不变的条件下,完成了验证机增升装置的气动力设计工作。风洞试验表明,改装成功的验证机增升装置具有良好的气动特性。     

Streamwise-body-force-model for rapid simulation combining internal and external flow fields

A streamwise-body-force-model (SBFM) is developed and applied in the overall flow simulation for the distributed propulsion system, combining internal and external flow fields. In view of axial stage effects, fan or compressor effects could be simplified as body forces along the streamline. These body forces which are functions of local parameters could be added as source terms in Navier-Stokes equations to replace solid boundary conditions of blades and hubs. The val-idation of SBFM with uniform inlet and distortion inlet of compressors shows that pressure perfor-mance characteristics agree well with experimental data. A three-dimensional simulation of the integration configuration, via a blended wing body aircraft with a distributed propulsion system using the SBFM, has been completed. Lift coefficient and drag coefficient agree well with wind tun-nel test results. Results show that to reach the goal of rapid integrated simulation combining inter-nal and external flow fields, the computational fluid dynamics method based on SBFM is reasonable.     

Multi-state autonomous drilling for lunar exploration

Due to the lack of information of subsurface lunar regolith stratification which varies along depth, the drilling device may encounter lunar soil and lunar rock randomly in the drilling process. To meet the load safety requirements of unmanned sampling mission under limited orbital resources, the control strategy of autonomous drilling should adapt to the indeterminable lunar environments. Based on the analysis of two types of typical drilling media (i.e., lunar soil and lunar rock), this paper proposes a multi-state control strategy for autonomous lunar drilling. To represent the working circumstances in the lunar subsurface and reduce the complexity of the control algo-rithm, lunar drilling process was categorized into three drilling states:the interface detection, initi-ation of drilling parameters for recognition and drilling medium recognition. Support vector machine (SVM) and continuous wavelet transform were employed for the online recognition of dril-ling media and interface, respectively. Finite state machine was utilized to control the transition among different drilling states. To verify the effectiveness of the multi-state control strategy, drilling experiments were implemented with multi-layered drilling media constructed by lunar soil simulant and lunar rock simulant. The results reveal that the multi-state control method is capable of detect-ing drilling state variation and adjusting drilling parameters timely under vibration interferences. The multi-state control method provides a feasible reference for the control of extraterrestrial autonomous drilling.     

飞机机翼着陆滑跑动态性能分析

飞机着陆滑跑过程中,机翼结构将受到较大的冲击作用和振动激励。为预判结构局部危险部位,给结构强度设计提供参考,需对机翼着陆滑跑过程中的动态性能进行分析。创新性地考虑了飞机滑跑速度和气动力的变化,为有限元计算提供可靠的外载输入,并合理设置约束条件,建立半机体有限元模型,降低计算规模。最后提取机翼各站位处的载荷响应峰值,做出动响应包线,预判结构局部危险部位,如机翼根部,为结构强度设计提供参考。