基于音圈电机的环形桁架结构主动悬吊方法

环形桁架结构是卫星可展开天线的基本结构。文章提出一种主动悬吊方法,可在地面状态下卸载环形桁架结构的重力。该方法基于音圈电机可以同时输出安培力和大位移,通过求解悬吊系统的静态方程计算悬吊点的张力即所需安培力;然后,建立主动悬吊试验系统,令音圈电机输出等于所需安培力,即实现悬吊结构对重力的卸载。经试验验证,悬吊后的结构前两阶频率与原结构的几乎相等,且模态一致,说明该悬吊方法有效。     

转动薄壁圆柱筒振动特性:有限元法与解析解的对比

采用解析法和有限元法,研究了科氏力和离心刚化效应对不同约束条件下转动薄壁圆柱筒结构振动特性的影响,并进行了对比分析.结果表明,与解析解相比,有限元法计算得到的静止状态薄壁圆柱筒结构固有频率因边界条件不同而存在不同的差异,其中两端简支边界条件下与解析解吻合较好.随转速增加,前后行波频率差值加大,曲线明显分离,而这种分离趋势随周向波数的增大而减小.由于离心刚化效应的存在,相比于只考虑科氏力的影响,转动薄壁圆柱筒的行波频率有增大的趋势,并且当转速和周向波数较大时,前后行波频率均会大于对应的静频率.      

A fast and automatic full-potential finite volume solver on Cartesian grids for unconventional configurations

To meet the requirements of fast and automatic computation of subsonic and transonic aerodynamics in aircraft conceptual design,a novel finite volume solver for full potential flows on adaptive Cartesian grids is developed in this paper.Cartesian grids with geometric adaptation are firstly generated automatically with boundary cells processed by cell-cutting and cell-merging algo rithms.The nonlinear full potential equation is discretized by a finite volume scheme on these Cartesian grids and iteratively solved in an implicit fashion with a generalized minimum residual (GMRES) algorithm.During computation,solution-based mesh adaptation is also applied so as to capture flow features more accurately.An improved ghost-cell method is proposed to implement the non-penetration wall boundary condition where the velocity-potential of a ghost cell is modified by an analytic method instead.According to the characteristics of the Cartesian grids,the Kutta condition is applied by specially computing the gradients on Kutta-faces without directly assigning the potential jump to cells adjacent wake faces,which can significantly improve the solution con verging speed.The feasibility and accuracy of the proposed method are validated by several typical cases of sub/transonic flows around an ONERA M6 wing,a DLR-F4 wing-body,and an unconventional figuration of a blended wing body (BWB).The validation cases demonstrate a fast convergence with fully automatic grid treatment and computation,and the results suggest its capacity in application for aircraft conceptual design.     

Investigation of dynamics of discrete framed structures by a numerical wave-based method and an analytical homogenization approach

In this article, the analytical homogenization method of periodic discrete media (HPDM) and the numerical condensed wave finite element method (CWFEM) are employed to study the lon-gitudinal and transverse vibrations of framed structures. The valid frequency range of the HPDM is re-evaluated using the wave propagation feature identified by the CWFEM. The relative error of the wavenumber by the HPDM compared to that by the CWFEM is illustrated in functions of fre-quency and scale ratio. A parametric study on the thickness of the structure is carried out where the dispersion relation and the relative error are given for three different thicknesses. The dynamics of a finite structure such as natural frequency and forced response are also investigated using the HPDM and the CWFEM.     

线性聚酰亚胺粉末冷等静压成型模拟及验证

文摘为了实现聚酰亚胺模塑粉的等静压近净成形,采用有限元软件ABAQUS对线性聚酰亚胺模塑粉的冷等静压(CIP)成型过程进行了模拟分析,利用Cam-Clay模型分析了圆柱体和长方体结构冷等静压成型前后的尺寸变化,并进行检验。结果显示圆柱体模拟与实验结果的误差在2.5%以内,长方体误差控制在4%以内,表明该模拟分析较准确预测了制件的尺寸变化。     

基于有限单元热网络法的航空发动机主轴轴承热分析

航空发动机主轴轴承温度场的精准预测对保证发动机润滑系统及整机稳定运转至关重要.针对传统热网络法精度低的问题,提出一种基于有限单元思想的有限单元热网络法.将轴承结构通过网格划分为有限个单元体,每个单元体设置一个温度节点代表该单元体的集总参数,节点间构建热阻关系并形成热网络,通过求解以温度为未知量的大型稀疏矩阵线性方程组来...     

潜入式喷管喉衬界面间隙优化设计

为了解决固体火箭发动机潜入式喷管喉衬在热载荷与内压联合作用下界面间隙优化问题,数值模拟方法求解了喷管热结构响应.采用流体仿真软件,计算了潜入式喷管流动过程的稳态流场,获取了高温燃气流动参数与固体壁面对流换热系数.并采用三维有限元结构计算平台,编写了非均布壁面压力载荷与非均布对流换热系数子程序,求解了喉衬前后搭接界面间隙...     

Mesh-dependence of Material with Softening Behavior

The issue of mesh-dependence emerges when the conventional continuum damage model is applied to handling the softening behavior. In order to circumvent the mesh-dependence, the non-local theory is introduced into the conventional damage model and the finite element formulas are derived for two-dimensional gradient-enhanced damage model. A new element is proposed in which the basic unknown quantities are displacement, non-local equivalent strain and the gradient of non-local equivalent strain. The element and constitutive equation proposed in this article are added to the finite element software ABAQUS through user subroutine UEL. Numerical results show that the gradient-enhanced damage model can eliminate the mesh-dependence and is effective for dealing with the issue of softening behavior.     

The use of Gaussian equations of motions of a satellite for local gravity anomaly recovery

The orbital elements of a low Earth orbiting satellite and their velocities can be used for local determination of gravity anomaly. The important issue is to find direct relations among the anomalies and these parameters. Here, a primary theoretical study is presented for this purpose. The Gaussian equations of motion of a satellite are used to develop integral formulas for recovering the gravity anomalies. The behaviour of kernels of the integrals are investigated for a two-month simulated orbit similar to that of the Gravity field and steady-state ocean circulation explorer (GOCE) mission over Fennoscandia. Numerical investigations show that the integral formulas have neither isotropic nor well-behaved kernels. In such a case, gravity anomaly recovery is not successful due to large spatial truncation error of the integral formulas. Reformulation of the problem by combining the orbital elements and their velocities leads to an integral with a well-behaved kernel which is suitable for our purpose. Also based on these combinations some general relations among the orbital elements and their velocities are obtained which can be used for validation of orbital parameters and their velocities.     

可压缩流动激波装配在格心型有限体积法中的应用

发展了一种基于格心型有限体积方法(FVM)的激波装配算法。通过定义网格节点属性可以灵活调用激波装配和激波捕捉计算方法。在使用激波装配方法时,激波节点运动速度和下游运动速度通过Rankine-Hugoniot(R-H)关系式获得,同时采用非结构动网格技术描述激波的运动以及调整其他网格节点的位置。流过激波面元的通量为上游单元的基本通量,物理概念更加清晰,通量计算也更为准确。在计算过程中,网格节点属性可以发生变化,以此实现对带有拓扑变化流场的描述。数值试验表明:本文提出的计算方法不但具有较高的计算精度,同时能有效地避免由于捕捉激波而出现的数值问题。