磁激等离子体超声速气流的瞬态加速系统及其实验研究

研制了基于激波风洞的热电离系统,设计了马赫数Ma=1.5的喷管和分段法拉第型实验段,并选用了合理的磁场及电场方案。采用氦气驱动氩气模式,通过在激波管低压段注入电离种子K₂CO₃粉末实现气流的热电离;压缩后的高温氩气启动喷管,以瞬态超声速导电流体形式通过实验段。实验结果表明:当激波管高压段压力为1.1 MPa、低压段压力为500 Pa时,喷管出口的超声速导电气流温度约为4 185.91 K,压力约为0.037 MPa;当电容电压为400 V、磁感应强度为1.0 T时,由实验段中间位置电极的放电特性可以估算出气流电导率约为78.1 S/m,单对电极输入功率约为9.46 kW;用感应电压法对加速效果进行初步评估,出口气流速度增加了29.3%,电效率为26.1%。     

SiO2f/SiO2复合材料自身及其与铜、不锈钢的钎焊

采用AgCuTi活性钎料,在880℃/10min规范下成功实现了SiO2f/SiO2自身、SiO2f/SiO2与Cu和SiO2f/SiO2与1Cr18Ni9Ti三种接头的连接。实验结果表明,三种接头中靠近SiO2f/SiO2母材的界面处均形成了一层薄薄的扩散反应层组织,反应层中出现了Ti和O的富集,根据两者的原子比例推断生成了TiO2相;另外,三种接头中心区都形成了由灰色相和白色相共同组成的Ag-Cu共晶组织,其中灰色相为Cu基固溶体,白色相为Ag基固溶体。接头剪切强度结果显示,SiO2f/SiO2/Cu接头剪切强度为12.4MPa,SiO2f/SiO2/1Cr18Ni9Ti接头剪切强度为18.4MPa,接头中的残余应力是决定接头强度大小的重要因素之一。     

2D C/SiC-ZrB2复合材料的烧蚀性能

用ZrB2微粉对2D C/SiC基体进行改性,研究了化学气相渗透结合浆料浸渍及先驱体浸渍裂解工艺制备2DC/SiC-ZrB2复合材料在氧-乙炔焰和1800℃甲烷风洞环境中的烧蚀行为.结果表明:在氧-乙炔环境中,2D C/SiC-ZrB2的线烧蚀率和质量烧蚀率分别为6.1×10-2 mm/s和1.0×10 -2g/s,相对2D C/SiC复合材料而言,ZrB2微粉并没有提高C/SiC复合材料的抗烧蚀性能.在1800℃甲烷风洞环境中,涂层致密度起主要作用,涂层致密度相同时,复合材料的开气孔率越大,质量烧蚀率越大,ZrB2微粉的渗入对C/SiC复合材料的烧蚀性能影响不大.     

航空企业自动化立体仓库输送系统的调度优化

运用粒子群算法解决航空企业自动化立体仓库中输送系统的调度优化问题.针对某主机厂自动化立体仓库输送系统的特点,采用分拣上/下包台、出/入库台、AGV运行的时间总和最小化作为性能指标,用粒子群算法的基本原理作为优化思想,然后使用 MATLAB软件进行算法仿真,分析结果的合理性.结果表明,该模型及仿真结果是合理的,效率高,满足航空企业使用需求.     

Research into Configuration and Flow of Wall Oil Film in Bearing Chamber Based on Droplet Size Distribution

The lubrication design and heat transfer determination of bearing chambers in aeroengine require a sufficient understanding of the oil droplet-film interaction and physical characteristic in an oil/air two-phase flow state.The analyses of oil droplet movement,mass and momentum transfer during the impingement of droplet/wall,as well as wall oil film thickness and flow velocity are very important for the bearing chamber lubrication and heat transfer calculation.An integrated model in combination with droplet movement,droplet/wall impact and film flow analysis is put forward initially based on the consideration of droplet size distribution.The model makes a contribution to provide more practical and feasible technical approach,which is not only for the study of droplet-film interaction and physical behavior in bearing chambers with oil/air two-phase flow phenomena,but also useful for an insight into the essence of physical course through droplet movement and deposition,film formation and flow.The influences of chamber geometries and operating conditions on droplet deposition mass and momentum transfer,and wall film thickness and velocity distribution are discussed.The feasibility of the method by theoretical analysis is also verified by the existing experimental data.The current work is conducive to expose the physical behavior of wall oil film configuration and flow in bearing chamber,and also significant for bearing chamber lubrication and heat transfer study under oil/air two-phase flow conditions.     

冷却剂/氧化剂组合式SteamJet发动机特性

为了系统深入地研究冷却剂/氧化剂组合式射流预冷却涡轮发动机(SteamJet)的发动机特性,建立了射流预冷却的热交换系统计算、物性修正计算、发动机部件特性修正计算和含氧化剂的燃烧室计算的数学模型,在此基础上,建立了基于双轴混排加力式涡扇发动机的SteamJet发动机性能计算模型,并编制了相应的计算程序。初步设计了SteamJet发动机的最大加力状态控制规律,计算分析了SteamJet发动机在不同冷却剂/氧化剂配比下沿飞行轨道的特性,并据此提出了影响冷却剂/氧化剂配比选择的主要因素;对冷却剂/氧化剂组合式SteamJet发动机进行了高度速度特性的计算和分析。结果表明,与喷水预冷却的SteamJet发动机相比,冷却剂/氧化剂组合式SteamJet发动机具有更好的燃烧稳定性和推力特性,能够满足高超声速飞行的需求。     

基于Linux军用TCP/IP协议栈设计与实现

提出一种在嵌入式Linux操作系统上运行TCP/IP协议的解决方案。介绍了Linux内核,在此基础上结合嵌入式系统特点,对TCP/IP协议栈进行简化,提出总协议栈的体设计。根据军用通讯要求着重讨论了网络协议的安全问题,参考现在通用的网络安全模式PGP,对TCP/IP协议栈进行修改,主要是在应用层中加入了加密、认证以及密钥分配过程。加密过程采用DES和RSA组合算法,保证其安全性、可行性以及时效性。     

Control-oriented Modeling for Air-breathing Hypersonic Vehicle Using Parameterized Configuration Approach

This article presents a parameterized configuration modeling approach to develop a 6 degrees of freedom (DOF) rigid-body model for air-breathing hypersonic vehicle (AHV). The modeling process involves the parameterized configuration design, inviscous hypersonic aerodynamic force calculation and scramjet engine modeling. The parameters are designed for airframe-propulsion integration configuration, the aerodynamic force calculation is based on engineering experimental methods, and the engine model is acquired from gas dynamics and quasi-one dimensional combustor calculations. Multivariate fitting is used to obtain analytical equations for aerodynamic force and thrust. Furthermore, the fitting accuracy is evaluated by relative error (RE). Trim results show that the model can be applied to the investigation of control method for AHV during the cruise phase. The modeling process integrates several disciplines such as configuration design, aerodynamic calculation, scramjet modeling and control method. Therefore the modeling method makes it possible to conduct AHV aerodynamics/propulsion/control integration design.     

"回收/调节"方法在混合LES/RANS模拟方法中的应用

采用一种混合大涡模拟/雷诺平均Navier-Stokes(LES/RANS)模拟方法结合三阶加权基本无振荡(WENO)格式对马赫数为2.88的压缩斜坡流动进行了数值模拟,并采用"回收/调节"方法生成入口湍流脉动边界条件.当采用固定入口边界条件时,湍流边界层会缺乏合理的湍流能量,使之抵抗逆压梯度的能力减弱,会严重高估分离...     

某涡扇发动机考虑级间引气的二维数值模拟

针对采用S₂流面流场模拟软件(AES-S2),对某涡扇发动机风扇、压气机(考虑级间引气)和整机进行地面0km及高空21km低雷诺数工况下转速特性的评估和流场分析.AES-S2数值仿真模型由带有黏性项的二维欧拉方程、燃烧模型和损失模型构成;采用任意曲线坐标系,可保证复杂几何边界的计算精度;采用隐式高阶精度Godunov求解格式,数值稳定性高,可自动捕捉激波.仿真结果表明:AES-S2计算稳定性好,收敛速度快;风扇和压气机的计算精度高于整机;整机二维计算满足工程精度需求,可为部件研制和整机部件匹配提供性能参数依据.