直刃尖刀形状对超声辅助切削系统振动性能的影响

基于超声振动设计理论并结合超声振动变幅杆,设计了一种用于弱刚度材料超声辅助切割的直刃尖刀.建立了直刃尖刀和超声振动系统一体的有限元模型,系统分析了直刃尖刀刀体长度、厚度参数对超声振动系统谐振频率、振幅放大倍数和刀具纵向振幅的影响,探讨了刀具横向和侧向振幅沿刀具轴线方向的分布规律.针对特定的超声振动系统,确定了综合性能最优的刀具参数.研制了具有不同形状参数的去刃模拟刀具,并安装于同一超声振动系统进行测试,对仿真分析结论进行验证,理论分析与试验结果相一致.根据理论分析确定的最佳参数研制了直刃尖刀并测试了其振动性能.研究结论对超声辅助切削加工的直刃刀尖的研制提供了理论指导.     

Simultaneous state and actuator fault estimation for satellite attitude control systems

In this paper, a new nonlinear augmented observer is proposed and applied to satellite attitude control systems. The observer can estimate system state and actuator fault simultaneously. It can enhance the performances of rapidly-varying faults estimation. Only original system matrices are adopted in the parameter design. The considered faults can be unbounded, and the proposed augmented observer can estimate a large class of faults. Systems without disturbances and the fault whose finite times derivatives are zero piecewise are initially considered, followed by a discussion of a general situation where the system is subject to disturbances and the finite times derivatives of the faults are not null but bounded. For the considered nonlinear system, convergence conditions of the observer are provided and the stability analysis is performed using Lyapunov direct method. Then a feasible algorithm is explored to compute the observer parameters using linear matrix inequalities (LMIs). Finally, the effectiveness of the proposed approach is illustrated by considering an example of a closed-loop satellite attitude control system. The simulation results show satisfactory perfor-mance in estimating states and actuator faults. It also shows that multiple faults can be estimated successfully.     

幂律型流体撞击射流破碎特性直接数值模拟

凝胶推进剂的双股射流撞击雾化广泛应用于液体火箭发动机的燃烧室中,其破碎特征及雾化效果直接影响燃烧效率。为探究雾化特性的发展规律,采用直接数值模拟DNS方法,对射流速度为100m/s的剪切稀化非牛顿液体正交撞击产生的雾化特征、液体表面积、表面波、涡特性以及非牛顿特性开展研究。结果表明,射流下形成的雾化流场迅速扩张形成液膜,液膜两侧边缘破碎成大量的液丝与液滴,核心部分产生撞击波后在气体力的作用下逐步发展为带有凸起和褶皱的不稳定表面波,其撞击波波长最大可达2.46倍射流直径。液体表面积不断增长,但无量纲表面积总体呈现先下降再上升的趋势。气体中的涡量分布则分为有序附着区和无序爆炸区两类,并且涡量主要集中分布于气相区域。此外,射流撞击时产生强剪切使该液体内部的粘性系数下降,最低仅为初始粘性系数的0.3倍。     

航天器故障诊断与容错控制技术研究综述

详细综述了航天器故障诊断与容错控制的研究进展。重点从基于模型的方法、基于数据的方法和基于知识的方法三个方面分别阐述了航天器故障诊断技术的研究进展,并且总结了航天器容错控制技术的研究现状,然后介绍了国内外的一些相关技术项目的开展情况,最后对未来可能的发展方向进行了探讨。     

执行器故障下的运载火箭非奇异终端滑模容错控制

针对存在未知外部干扰和执行器卡死故障的运载火箭,提出了一种基于非奇异终端滑模面的姿态跟踪控制算法。首先,建立了考虑干扰和执行器卡死故障的运载火箭姿态控制系统多输入多输出系统模型;然后定义了运载火箭姿态跟踪系统模型,针对定义的模型,设计了一种非奇异终端滑模面,使得系统在执行器故障情况下仍能较为精确地跟踪参考信号。基于李雅普诺夫函数证明了运载火箭姿态跟踪控制系统的稳定性和有限时间收敛特性。数值仿真检验了本文基于非奇异终端滑模运载火箭姿态跟踪控制算法的有效性。     

宽频带带状线魔T的一种新颖的分析与设计方法

介绍了一种宽频带带状线魔T的设计原理,并采用了一种新颖的设计方法,即利用Ansoft公司的电磁场高频结构仿真软件HFSS对所设计的器件进行分析。所设计的魔T带宽可达一个倍频程以上,在设计频段(1GHz~2GHz)内,移相偏差Δ<±5°,幅度不平衡ΔA<1dB,回波损耗小于-19dB,端口隔离度小于-20dB。     

火箭发动机涡轮泵故障检测及预测算法研究

涡轮泵作为液体火箭发动机的核心部件,恶劣的工作环境和极高的转速使其易发生组件断裂、烧蚀等问题。为了对液体火箭发动机的涡轮泵进行健康管理,提出针对某型液体火箭发动机涡轮泵的数据驱动故障检测、故障预测及健康状态评估方法。在某型液体火箭发动机试车数据集上,通过对涡轮泵轴、径、切向振动数据进行对应的时域、频域特征处理后,送入训练好的ResNet网络、自主设计的图像特征识别算法以及退化模式线性回归模型,分别实现了对该型液体火箭发动机涡轮泵的故障检测、预测及健康状态评估,具有较高的准确性。     

合理运用SI技术快速收敛高速数字电路设计

随着数字电路集成度和工作频率的不断提高,信号完整性(Signal Integrity, SI)问题在产品研制过程中越来越突出。以惯导系统中的某导航计算机为例,针对故障信号回路,使用仿真软件对其SDRAM时钟信号进行信号完整性仿真,并进行优化设计。通过对比优化前和优化后的仿真与测量结果,验证了由于端接参数不匹配造成SDRAM时钟信号的非单调性畸变问题。仿真与测量结果表明,在产品研制流程中加入信号完整性仿真环节有利于设计快速收敛,提前规避风险,缩短研发周期,降低设计成本,提高电路产品的可靠性和电磁兼容性。     

LRU可靠性评估仿真模型及实例分析

目前,有关航空维修中出现的高故障率现场可更换单元(LRU)的可靠性评估和LRU 故障组件定位等方面的研究仍鲜有报道,为此设计一种适用于LRU“更换维修暠策略的可靠性评估仿真模型,详细介绍模型中各个功能模块的设计原理和实现方法、步骤,并以某型军用飞机液压系统中常见的高故障率LRU 为例,对模型进行应用分析。结果表明:该仿真模型在LRU 可靠性评估中具有可行性和普遍适用性。     

Fault diagnosis based on measurement reconstruction of HPT exit pressure for turbofan engine

Aero-engine gas path health monitoring plays a critical role in Engine Health Management(EHM). To achieve unbiased estimation, traditional filtering methods have strict requirements on measurement parameters which sometimes cannot be measured in engineering. The most typical one is the High-Pressure Turbine(HPT) exit pressure, which is vital to distinguishing failure modes between different turbines. For the case of an abrupt failure occurring in a single turbine component, a model-based sensor measurement reconstruction method is proposed in this paper. First,to estimate the missing measurements, the forward algorithm and the backward algorithm are developed based on corresponding component models according to the failure hypotheses. Then,a new fault diagnosis logic is designed and the traditional nonlinear filter is improved by adding the measurement estimation module and the health parameter correction module, which uses the reconstructed measurement to complete the health parameters estimation. Simulation results show that the proposed method can well restore the desired measurement and the estimated measurement can be used in the turbofan engine gas path diagnosis. Compared with the diagnosis under the condition of missing sensors, this method can distinguish between different failure modes, quantify the variations of health parameters, and achieve good performance at multiple operating points in the flight envelope.