蜂窝夹层板超高速撞击极限方程分析

为分析撞击极限方程对蜂窝夹层结构的穿透特性的预测能力,调研得到了3类撞击极限方程的表达形式和等效方法,以及131个采用碳纤维复合材料(CFRP)面板的蜂窝夹层板结构的试验数据,并对撞击极限方程的预测能力进行了比较计算。结果发现,MET方程对他源数据的四种(未失效、失效、总体以及安全)预测率均大于80%,进行在轨航天器结构的失效分析时可优先选用;SRL方程对本源数据的安全预测率达到了100%,在他源数据上的安全预测率也很高,适用于航天器防护结构设计。探讨了撞击极限方程中的系数、速度分界值的优化思路,以提高撞击极限方程的预测率。     

Attitude Control Considering Variable Input Saturation Limit for a Spacecraft Equipped with Flywheels

A new attitude controller is proposed for spacecraft whose actuator has variable input saturation limit. There are three identical flywheels orthogonally mounted on board. Each rotor is driven by a brushless DC motor (BLDCM). Models of spacecraft attitude dynamics and flywheel rotor driving motor electromechanics are discussed in detail. The controller design is similar to saturation limit linear assignment. An auxiliary parameter and a boundary coefficient are imported into the controller to guarantee system stability and improve control performance. A time-varying and state-dependent flywheel output torque saturation limit model is established. Stability of the closed-loop control system and asymptotic convergence of system states are proved via Lyapunov methods and LaSalle invariance principle. Boundedness of the auxiliary parameter ensures that the control objective can be achieved, while the boundary parameter’s value makes a balance between system control performance and flywheel utilization efficiency. Compared with existing controllers, the newly developed controller with variable torque saturation limit can bring smoother control and faster system response. Numerical simulations validate the effectiveness of the controller.     

某型发动机排气段隔板脱落失效分析

对某型发动机排气段隔板脱落及事故原因进行了分析。结果表明,排气段隔板的断裂性质为机械疲劳断裂,导致疲劳断裂的根本原因是该排气段隔板焊缝存在未焊透现象所致。     

基于立体视觉的板料成形极限应变测量关键技术及其系统

 设计并实现了一种基于双目立体视觉和数字图像相关方法的板料成形极限应变测量系统—BOSAS(双目视觉应变测量分析系统),对其中的关键技术作了深入讨论。该系统可以克服传统坐标网格方法很难进行变形过程的动态监控、自动化程度不高等局限,并可计算试件各变形阶段全场应变分布,以及重建不同变形时刻下试件的几何外形。将分段位移传递法和有限应变理论相结合,可计算大变形下的极限应变。对深冲铝板6016以及航空铝板2A12-T4、2A12-O、7B04-O等材料的应变测量结果显示本文方法适用于板料成形三维变形及极限应变的测量,并将测得数据与由坐标网格方法测得的数据进行比较,结果表明本文方法测量准确、可靠。     

On the effect of considering more realistic particle shape and mass parameters in MMOD risk assessments

One of the primary mission risks tracked in the development of all spacecraft is that due to micro-meteoroids and orbital debris (MMOD). Both types of particles, especially those larger than 0.1 mm in diameter, contain sufficient kinetic energy due to their combined mass and velocities to cause serious damage to crew members and spacecraft. The process used to assess MMOD risk consists of three elements: environment, damage prediction, and damage tolerance. Orbital debris risk assessments for the Orion vehicle, as well as the Shuttle, Space Station and other satellites use ballistic limit equations (BLEs) that have been developed using high speed impact test data and results from numerical simulations that have used spherical projectiles. However, spheres are not expected to be a common shape for orbital debris; rather, orbital debris fragments might be better represented by other regular or irregular solids. In this paper we examine the general construction of NASA’s current orbital debris (OD) model, explore the potential variations in orbital debris mass and shape that are possible when using particle characteristic length to define particle size (instead of assuming spherical particles), and, considering specifically the Orion vehicle, perform an orbital debris risk sensitivity study taking into account variations in particle mass and shape as noted above. While the results of the work performed for this study are preliminary, they do show that continuing to use aluminum spheres in spacecraft risk assessments could result in an over-design of its MMOD protection systems. In such a case, the spacecraft could be heavier than needed, could cost more than needed, and could cost more to put into orbit than needed. The results obtained in this study also show the need to incorporate effects of mass and shape in mission risk assessment prior to first flight of any spacecraft as well as the need to continue to develop/refine BLEs so that they more accurately reflect the shape and material density variations inherent to the actual debris environment.     

超椭球凸集合可靠性综合指标定义及求解方法

针对失效域与超椭球凸集合发生干涉与不发生干涉两种情况下,超椭球凸集合非概率可靠性与非概率可靠度两种指标各自存在的不足,将两指标相结合提出多个超椭球凸集合描述时的可靠性综合指标定义,并提出将改进的有限步长迭代法(MLSA)与Monte-Carlo法结合来求解综合指标的方法.MLSA是在有限步长迭代法的基础上提出的,根据增...     

C/SiC材料在模拟空天往返条件下的可重复使用性能评估

针对飞行器空天往返、多次使用的发展需求,以2D C/SiC材料为对象,选择开放大气模拟环境、800 ℃温度条件开展了常/高温拉伸试验、以及常温→高温→降温循环变化历程下拉-拉疲劳的耦合试验,得到不同的力学性能规律,分析了影响材料表面涂层完整性的控制因素及转化点。表明C/SiC材料具有优良的高温静态持续强度性能,但在常-高温循环变化历程下的疲劳性能明显衰减。采用剩余刚度衰减模型,提出了力-热-氧耦合时考虑常-高温循环历程影响因素、以及氧化尺寸效应影响的疲劳剩余性能评估方法。     

飞控系统极限环抑制对

舵机是电传飞控系统中非线性因素的重要组成部分,若参数选择不当,常会发生稳态不衰减的小幅值极限环振荡现象。应用非线性控制理论,将飞控系统稳定性要求转化为对舵机的幅频特性、相频特性和不灵敏区范围要求,从而通过舵机设计达到抑制极限环的目的。仿真结果表明,该方法简单、实用,具有较高的工程应用价值。     

MJ螺纹在飞机上的应用探讨

详细介绍了MJ螺纹与M螺纹的区别,总结了使用MJ螺纹的益处,探讨了在实际装配中,MJ螺纹与M螺纹配合使用的可行性问题,给出了解决MJ外螺纹与M内螺纹能否配合问题的判定公式。     

一个二次可积系统在二次保守扰动下的分支

研究了一个具有同宿轨的二次可积系统在二次保守扰动下的分支现象.此时一阶Melnikov函数恒等于零,必须考虑二阶Melnikov函数,而在一阶Melnikov函数中不起作用的扰动参数在二阶Melnikov函数中却起着非常重要的作用,因此扰动部分极为复杂.在此借助于二阶Melnikov函数的计算公式及理论分析,建立了极限环分支定理,得到了在一阶Melnikov函数恒等于零,而二阶Melnikov函数不恒等于零时,可能分支出的极限环个数最大为2的结论.