定容燃烧弹实验系统及C7燃料火焰速度测量

设计并搭建了适用于测量高温、高压条件下层流火焰传播速度的定容燃烧弹实验系统。详细介绍了定容燃烧弹实验系统的主要子系统的构成和功能,并阐述实验数据处理方法。测量初始温度为400K、压力为0.1MPa和0.3MPa,C7燃料(甲苯、甲基环己烷、正庚烷)/空气层流火焰传播速度,并与现有文献结果进行了对比。结果表明:该定容燃烧弹实验系统具有较高的可靠性,不仅能够准确测量较高初始温度、不同初始压力条件下燃料/空气的层流火焰传播速度,而且能够拓宽测量火焰传播速度当量比的范围。      

三维非平面裂纹扩展参数化模拟方法

发展一种基于有限元方法（FEM）的自动模拟三维非平面裂纹扩展的模拟方法。该方法采用参数化建模的方式建立裂纹体,以镶嵌裂纹体的方式在结构中插入裂纹,然后通过有限元计算得到裂纹扩展参量,自动更新裂纹体从而模拟裂纹的扩展过程。通过模拟三个裂纹扩展算例,计算了裂纹扩展循环数,对比试验结果,误差分别为195%、161%、21%。结果表明:该方法能够模拟三维非平面裂纹的扩展并计算扩展寿命,具有一定的精度和适用性。      

A100钢外螺纹椭圆超声滚压强化试验研究

A100钢有较高的疲劳抗力和显著的减重效果.在航空工业中,飞机起落架主要承力件正逐步采用A100钢,且主要承力件多采用螺纹联接.为了提高螺纹疲劳寿命,提出了超声振动滚压强化工艺方法,设计了外螺纹超声滚压强化装置,进行了螺纹超声滚压强化前后性能对比试验.利用X射线分析仪、维式硬度计、粗糙度仪和疲劳试验机,分别测量了螺纹超声滚压强化前后的残余应力、维氏硬度、表面粗糙度以及疲劳寿命.结果表明,超声滚压强化后牙底残余应力提高了70％,显微硬度提高了14％,粗糙度降低了51％,600MPa应力条件下寿命提高了5倍.     

热变形对TC4氩弧拼焊板拉伸与疲劳性能的影响

在700℃下,对TC4氩弧拼焊板进行了3个变形量(主应变0.5％、1.6％、2.7％)的等双向拉伸成形,研究了热变形对TC4氩弧拼焊板单向拉伸性能和疲劳寿命的影响.结果表明:等双拉变形前后,TC4氩弧拼焊板拉伸试样均断裂在焊接热影响区,热影响区的强度低于母材和焊缝.随着等双拉热变形量增加,TC4拼焊板试样疲劳寿命有所增加,这是因为一定变形量的热成形释放了焊接残余应力.     

Estimation of ballistic coefficients of low altitude debris objects from historical two line elements

This paper presents a new method for estimating ballistic coefficients (BCs) of low perigee debris objects from their historical two line elements (TLEs). The method uses the drag perturbation equation of the semi-major axis of the orbit. For an object with perigee altitude below 700 km, the variation in the mean semi-major axis derived from the TLE is mainly caused by the atmospheric drag effect, and therefore is used as the source in the estimation of the ballistic coefficient. The method is tested using the GRACE satellites, and a number of debris objects with external ballistic coefficient values, and agreements of about 10% are achieved.     

Estimation of GPS instrumental biases from small scale network

With 4 GPS receivers located in the equatorial anomaly region in southeast China, this paper proposes a grid-based algorithm to determine the GPS satellites and receivers biases, and at the same time to derive the total electron content (TEC) with time resolution of 15 min and spatial resolution of 1° by 3.5° in latitude and longitude. By assuming that the TEC is identical at any point within a given grid block and the biases do not vary within a day, the algorithm arranges unknown biases and TECs with slant path TEC from the 4 receivers’ observations into a set of equations. Then the instrumental biases and the TECs are determined by using the least squares fitting technique. The performance of the method is examined by applying it to the GPS receiver chain observations selected from 16 geomagnetically quiet days in four seasons of 2006. It is found that the fitting agrees with the data very well, with goodness of fit ranging from 0.452 TECU to 1.914 TECU. Having a mean of 0.9 ns, the standard deviations for most of the GPS satellite biases are less than 1.0 ns for the 16 days. The GPS receiver biases are more stable than that of the GPS satellites. The standard deviation in the 4 receiver bias is from 0.370 ns to 0.855 ns, with a mean of 0.5 ns. Moreover, the instrumental biases are highly correlated with those derived from CODE and JPL with independent methods. The typical precision of the derived TEC is 5 TECU by a conservative estimation. These results indicate that the proposed algorithm is valid and qualified for small scale GPS network.     

飞机发动机叶片缺陷的差激励涡流传感器检测

针对某型号飞机发动机涡轮叶片上预制的微裂纹缺陷进行了检测研究.基于涡流检测技术设计并研制了一种尺寸小、灵敏度高的差激励探头,应用有限元分析软件开展了叶片微裂纹缺陷仿真分析.为了实现叶片的自动高效检测,设计并采用数控多自由度扫查台来控制采集过程,实现了对叶片表面裂纹缺陷的快速扫查检测.采集信号经过信号调理电路,A/D转换后输入计算机,完成信号的保存、处理和输出.通过对比实验结果与仿真结果发现,研制的差激励式涡流传感器可以有效地实现对叶片类零件表面微裂纹位置的判定,对涡轮叶片类零件微缺陷早期诊断评估具有一定的现实和借鉴意义.      

半球谐振子疲劳寿命分析与仿真

半球谐振子的寿命和损伤是直接影响高精度半球谐振陀螺使用时长和安全性的重要因素。目前国内加工的半球谐振子所用的熔融石英玻璃材料主要依靠进口,采用传统的疲劳寿命实验确定方法成本过于昂贵,因此需要利用疲劳分析软件对半球谐振子的疲劳寿命进行分析。文章通过半球谐振陀螺应力分析,采用ANSYS软件对熔融石英半球谐振子进行应力分析仿真,确定因残余应力所引起的疲劳危险部位,并在疲劳部位进行裂纹扩展分析,得到 、 和 型应力强度因子,以使在半球谐振子结构设计和使用过程中对易疲劳的部位进行有效监控和预防。     

地下结构模型试验的光学激波管

光学激波管是进行抗爆结构试验研究的一种新型动载设备,它除具有常规激波管的通过电测手段测试试验结构物上一点或多点的应力、应变、速度等力学参数外,其突出的特点是通过光测手段能够拍摄试验结构物在冲击波动压作用下连续变化的过程和被破坏形态的清晰物理图像,进行地下结构的抗爆研究。本文较详细地介绍了用于地下结构抗爆试验研究用的光学激波管设备的构造和测试手段以及设备调试和应用试验的情况,最后还公布了用该设备拍摄到的激波进入通道后波后新物理现象的彩色波动照片及用该设备做的部分试验研究成果。     

氢致Ⅰ型裂纹扩展的位错塞积群模型

本文利用位错理论和夹杂理论研究了Ⅰ型裂纹前方的位错塞积群和氢气团以及它们之间的交互作用，求得了塞积群的位借密度、应力集中系数和裂纹扩展速率。所得结果表明，氢气团促进裂纹尖端位猪源开动，即促进滞后塑性变形，提高塞积群的应力集中系数，引起材料脆化，促进微裂纹核形成。