Ionospheric behavior of the F2 peak parameters foF2 and hmF2 at Hainan and comparisons with IRI model predictions

Monthly median values of foF2, hmF2 and M(3000)F2 parameters, with hourly time interval resolution for the diurnal variation, obtained with DPS-4 digisonde observations at Hainan (19.4°N, 109.0°E) are used to study the low latitude ionospheric variation behavior. The observational results are compared with the International Reference Ionospheric Model (IRI) predictions. The time period coverage of the data used for the present study is from March 2002 to February 2005. Our present study showed that: (1) In general, IRI predictions using CCIR and URSI coefficients follow well the diurnal and seasonal variation patterns of the experimental values of foF2. However, CCIR foF2 and URSI foF2 IRI predictions systematically underestimate the observed results during most time period of the day, with the percentage difference ΔfoF2 (%) values changing between about −5% and −25%, whereas for a few hours around pre-sunrise, the IRI predictions generally overestimate the observational ones with ΔfoF2 (%) sometimes reaching as large as ∼30%. The agreement between the IRI results and the observational ones is better for the year 2002 than for the other years. The best agreement between the IRI results and the observational ones is obtained in summer when using URSI coefficients, with the seasonal average values of ΔfoF2 (%) being within the limits of ±10%. (2) In general, the IRI predicted hmF2 values using CCIR M(3000)F2 option shows a poor agreement with the observational results. However, when using the measured M(3000)F2 as input, the diurnal variation pattern of hmF2 given by IRI2001 has a much better agreement with the observational one with the detailed fine structures including the pre-sunrise and post-sunset peaks reproduced reasonably well. The agreement between the IRI predicted hmF2 values using CCIR M(30,000)F2 option and the observational ones is worst for the afternoon to post-midnight hours for the high solar activity year 2002. During daytime hours the agreement between the hmF2 values obtained with CCIR M(30,000)F2 option and the observational ones is best for summer season. The discrepancy between the observational hmF2 and that obtained with CCIR M(30,000)F2 option stem from the CCIR M(3000)F2 model, which does not produce the small scale structures observed in the measured M(3000)F2.     

一万氧压机轴振动控制分析与实践

本文介绍了一种非常规的高速轴振动抑制方法，主要是用振源分析技术，通过确诊设备故障原因来分析影响轴振动的主要因素，调节机器的系统刚度，再通过理论计算修订安装参数，制定设备故障处理对策，在涟源钢铁集团有限公司一万氧压机组上的实践取得了相当满意的效果，很有推广价值。     

变轨发动机不等量截尾试验可靠度评估

对于可靠度要求极高和任务时间以小时计的变轨发动机来说，目前广泛采用以铌合金为材料并喷涂以抗高温氧化涂层方案的推力室，这一类发动机在方案试验阶段结束后的研制试验中往往只出现截尾试验的结果。给出了不等量截尾试验结果的可靠度评估方案。     

复合材料壳体与喷管的卡环连接结构研究

较详细地对复合材料壳体与喷管卡环连接结构进行了有限元应力,应变分析,对卡环,接头及倒锥等多体接触问题进行研究;对“Ｉ”型及“Ｌ”型卡环结构分别进行了计算和比较,并给出计算结果及结果分析。     

导弹发射车主机发电时带外供电的方法

对某型导弹发射车主机发电的供电体制进行了简要分析 ,提出了增加外供电体制的措施和方法。外供电方案的实施 ,不仅为部队的平时训练提供了方便 ,而且为提高导弹发射车的可靠性和生存力提供了必要条件 ,增强了整个武器系统的战斗力。     

尺寸参数对气动液阀启动特性的影响

为气动液阀的启动过程建立了数学模型，分析了尺寸参数对该阀启动特性的影响。计算结果表明：在保证必要的工作寿命的前提下，适当地增大控制腔气孔的直径或增大靠近控制腔的活塞端面直径有利于提高该阀的响应能力。本文所得的结论有利于此类阀门的设计。     

二次抛物线型面喷管参数的优化选择

二次抛物线型面是火箭发动机喷管较常用的一种型面，对其参数进行优化选择是必要的，在喷管型面长度和出口扩张半角确定的条件下，优化方法是把比冲作为目标函数，利用一维等熵流的气动力公式，二次抛物线型面的几何关系和计算机求极大值方法，确定达到比冲最佳值的设计变量一喷管初扩张角和出口马赫数。     

基于网格理论的纤维缠绕壳体结构可靠性数字仿真

研究了基于网格理论的纤维缠绕壳体结构可靠性数字仿真方法及程序。以乘同余法产生伪随机数用于仿真计算，并对所产生的伪随机数进行了检验，对某发动机纤维缠绕壳体进行了结构可靠性数字仿真计算，得出了其结构可靠性。     

推力中止过程一维不定常气相流动数值计算

准确地预示固体火箭发动机推力中止这一瞬变过程，对飞行器飞行精度及可靠性具有重要意义。建立了一维不定常流动数值计算模型，考虑了传热、摩擦、燃面变化，燃烧室长径比、通喉比等因素，计算了推力中止过程内弹道，给出了燃气参数沿燃烧室长度的分布及随时间的变化。     

空间小推力发动机推力室喷注器的设计与身部冷却问题

介绍了空间小推力双组元液体火箭发动机推力空头部喷注器设计的某些特点和身部冷却的一些问题，具体地讨论了几种喷注器设计方案和简述了身部液膜／辐射冷却的机制，并给出某些情况下估算壁温的方法。