力值加载装置控制系统设计

针对力标准机不适用于力值现场校准测试的问题,设计了一种便携式的力值加载装置。该装置采用STM32F103为主控单片机,采用高准确度AD转换器测量力值,优化了力值加载控制算法,避免了力值加载过程中可能出现的各种问题。该装置控制速度快,准确度高,适用于力值现场校准测试。     

Comparison of ionospheric F2 peak parameters foF2 and hmF2 with IRI2001 at Hainan

Monthly median values of foF2, hmF2 and M(3000)F2 parameters, with quarter-hourly time interval resolution for the diurnal variation, obtained with DPS4 digisonde at Hainan (19.5°N, 109.1°E; Geomagnetic coordinates: 178.95°E, 8.1°N) are used to investigate the low-latitude ionospheric variations and comparisons with the International Reference Ionosphere (IRI) model predictions. The data used for the present study covers the period from February 2002 to April 2007, which is characterized by a wide range of solar activity, ranging from high solar activity (2002) to low solar activity (2007). The results show that (1) Generally, IRI predictions follow well the diurnal and seasonal variation patterns of the experimental values of foF2, especially in the summer of 2002. However, there are systematic deviation between experimental values and IRI predictions with either CCIR or URSI coefficients. Generally IRI model greatly underestimate the values of foF2 from about noon to sunrise of next day, especially in the afternoon, and slightly overestimate them from sunrise to about noon. It seems that there are bigger deviations between IRI Model predictions and the experimental observations for the moderate solar activity. (2) Generally the IRI-predicted hmF2 values using CCIR M(3000)F2 option shows a poor agreement with the experimental results, but there is a relatively good agreement in summer at low solar activity. The deviation between the IRI-predicted hmF2 using CCIR M(3000)F2 and observed hmF2 is bigger from noon to sunset and around sunrise especially at high solar activity. The occurrence time of hmF2 peak (about 1200 LT) of the IRI model predictions is earlier than that of observations (around 1500 LT). The agreement between the IRI hmF2 obtained with the measured M(3000)F2 and the observed hmF2 is very good except that IRI overestimates slightly hmF2 in the daytime in summer at high solar activity and underestimates it in the nighttime with lower values near sunrise at low solar activity.     

Mapping lunar surface chemistry: New prospects with the Chandrayaan-2 Large Area Soft X-ray Spectrometer (CLASS)

Surface chemistry of airless bodies in the solar system can be derived from remote X-ray spectral measurements from an orbiting spacecraft. X-rays from planetary surfaces are excited primarily by solar X-rays. Several experiments in the past have used this technique of X-ray fluorescence for deriving abundances of the major rock forming elements. The Chandrayaan-2 orbiter carries an X-ray fluorescence experiment named CLASS that is designed based on results from its predecessor C1XS flown on Chandrayaan-1. We discuss the new aspects of lunar science that can be potentially achieved with CLASS.     

Longitudinal variation of the equatorial ionosphere: Modeling and experimental results

We describe a new version of the Parameterized Regional Ionospheric Model (PARIM) which has been modified to include the longitudinal dependences. This model has been reconstructed using multidimensional Fourier series. To validate PARIM results, the South America maps of critical frequencies for the E (foE) and F (foF2) regions were compared with the values calculated by Sheffield Plasmasphere-Ionosphere Model (SUPIM) and IRI representations. PARIM presents very good results, the general characteristics of both regions, mainly the presence of the equatorial ionization anomaly, were well reproduced for equinoctial conditions of solar minimum and maximum. The values of foF2 and hmF2 recorded over Jicamarca (12°S; 77°W; dip lat. 1°N; mag. declination 0.3°) and sites of the conjugate point equatorial experiment (COPEX) campaign Boa Vista (2.8°N; 60.7°W; dip lat. 11.4°; mag. declination −13.1°), Cachimbo (9.5°S; 54.8°W; dip lat. −1.8°; mag. declination −15.5°), and Campo Grande (20.4°S; 54.6°W; dip lat. −11.1°; mag. declination −14.0°) have been used in this work. foF2 calculated by PARIM show good agreement with the observations, except during morning over Boa Vista and midnight-morning over Campo Grande. Some discrepancies were also found for the F-region peak height (hmF2) near the geomagnetic equator during times of F₃ layer occurrences. IRI has underestimated both foF2 and hmF2 over equatorial and low latitude sectors during evening-nighttimes, except for Jicamarca where foF2 values were overestimated.     

Statistical characterisation of spread F over South Africa

The occurrence of mid-latitude spread F (SF) over South Africa has not been extensively studied since the installation of the DPS-4 digisondes in 1996 and 2000 at Grahamstown (33.32 °S, 26.50 °E) and Madimbo (22.38 °S, 30.88 °E) respectively. This study is intended to quantify the probability of occurrence of F region disturbances associated with SF over South Africa. A study was conducted using data for 8 years (2001–2008) over Madimbo (with a time resolution of 30 min) and Grahamstown (with a variable time resolution of 15 and 30 min). In this study, SF has been classified into frequency SF (FSF), range SF (RSF) and mixed SF (MSF). The SF events were identified by manually identifying ionograms showing SF and tabulating them according to type for further statistical analysis. The results show that the diurnal pattern of SF peaks strongly between 01:00 and 02:00 local time, LT (LT = UT + 2 h), where UT is the universal time. This pattern is true for all seasons and types of SF at Madimbo and Grahamstown in 2001 and 2005, except for RSF which had peaks during autumn and spring in 2001 at Madimbo. The probability of both MSF and FSF tends to increase with decreasing solar activity, with a peak in 2005 (a moderate solar activity period). The seasonal peaks of MSF and FSF are more frequent during winter months at both Madimbo and Grahamstown. In this study, SF was evident in ∼0.03% and ∼0.06% of the available ionograms at Madimbo and Grahamstown respectively during the 8 years.     

国产工业摄影测量相机精度测评CSCD

专业的工业摄影测量相机作为摄影测量的基础,其成像质量对测量精度有着直接的影响。目前,国内的专业摄影测量相机的发展比较缓慢,且质量参差不齐,研究合适的测试方法对国内专业测量相机的精度进行测评已刻不容缓。以CIM-1相机为例,从坐标重复性、标准长度等方面对国内工业摄影测量相机的精度进行了分析研究。通过与目前国际上比较认可的INCA相机进行了实验对比,并对实验结果进行了分析评价,得到一些比较理想的结论。为我国工业摄影测量系统检定规程的制定提供参考依据。     

基于IRI-2012模型广州地区f_0F_2实测与预测的对比分析

利用广州台站(23.2°N,113.3°E)的实测数据和IRI-2012模型提供的预测数据,对比分析了2013年广州地区f_0F2的变化特征.结果表明,IRI-2012模型能够较好预测该地区f_0F_2的变化趋势,并且CCIR参数得到的预测值比URSI参数更接近实测值;预测值与实测值存在系统偏差,在11:00 LT-06:00 LT时段,观测值均比预测值大,其他时段则相反.在日落后至午夜前时段,预测值与实测值有较大差距.绝对偏差的极值点通常出现在20:00 LT左右,最大超过4 MHz.相对偏差变化比较明显的时段是午夜后至凌晨;在02:00 LT或04:00 LT及06:00 LT附近,可能会出现双误差峰值点,最大超过0.4;但在σ变化很大的20:00 LT附近,相对偏差却变化不大.夜间增强现象会使得偏差增大,导致预测值不能很好反映实测f_0F2的变化.     

F-12 纤维/RE14复合材料压力容器成型工艺研究

研究讨论了缠绕过程中几种主要工艺参数对F— 12纤维 /RE14配方Φ15 0mm压力容器复合材料性能的影响。结果表明 :采用“交替”铺层方式缠绕成型 ,含胶量控制在 30 %～ 4 0 % (质量分数 ) ,缠绕张力控制在 15 0N～ 2 0 0N ,采用GPC谱图控制固化时机 ,得到的复合材料综合性能较好 ;用优化出的工艺参数进行了Φ4 80mm压力容器试验 ,结果表明其容器特性系数PV/W值为 37.0 2km ,纤维强度转化率高达73.2 6 %。     

1-3型压电纤维主动叠层板扭转特性的研究

对4类典型铺层的1-3型压电纤维复合材料主动板的变形模式进行了理论分析。在此基础上对具有扭转变形模式的主动叠层板进行了振动特性分析,得到了该类型主动叠层板在外界电场激励下的稳态解。最后对该类主动叠层板的扭转振动特性进行了深入的研究,包括作用电场强度的大小、频率对扭转特性的影响、压电纤维铺层角和压电纤维体积比对主动叠层板扭转特性的影响等。算例表明本文计算模型和有限元得到的结果符合良好,同时算例结果表明含1-3型压电纤维复合材料主动叠层板具有良好的主动扭转特性。     

导航计算机应用软件快速更新方法研究

目前,大多数嵌入式开发系统的软件更新必须通过硬件仿真器来实现,不便于系统的维护.良好的可维护性是嵌入式系统性能的一个重要方面,在一定程度上决定系统能否被广泛应用.本文针对南航导航研究中心自主开发的微小型导航计算机,研究了利用串行通信的方式实现应用软件快速更新的方法,解决了程序的定位、代码传输等问题,提高了系统的可维护性,体现了方法研究的实用价值.