飞机主起落架的光弹性应力分析

讨论了用光弹性嵌片法（一种新的模型试验方法）进行飞机主起落架的实验应力分析。采用该方法解决了传统光弹性贴片法中的贴片增强效应问题，避免了在贴片边界，因泊松比不匹配引起的误差，从而提高了测试灵敏度。实验应力分析选用了与实物尺寸相同的模型试件，克服了模型制作过程中遇到的许多困难。该方法在一套试验模型上能够直观地进行多种载荷状态下主起落架表面应力场的分析比较，为主起落架结构优化设计方案提供了试验依据，故具有广泛的应用前景．测试数据的计算校核表明，试验结果是可信的，可作为主起落架结构减重修型的重要试验依据。关键词     

模拟月壤研制的初步设想

模拟月壤是月球样品的地球化学复制品，作者总结世界上已有的5种模拟月壤JSC-1，MLS．1，MLS-2，MKS-1和FJS-1的研制过程、方法与基本理化性质，认为系列化模拟月壤研制对中国首次月球探测有重要意义，在此基础上，作者提出系列化模拟月壤研制的基本思路．     

精密GPS卫星钟差的改正和应用

分析了GPS卫生钟差的变化特性，探讨了利用GPS地面跟踪站的观测数据估算GPS卫星钟差的可行性，建立了相应的算法和软件系统，并把由地面跟踪站的实测数据估算的卫星钟差用于星载GPS定轨计算，得到优于1m的定轨精度。     

A320系列飞机机身抖动现象浅析

针对A320系列飞机在营运过程中产生间断性水平或垂直抖动故障，分析了产生抖动的原因，并通过更换作动器或操纵面铰链排除了抖动故障．同时提出了避免A320系列飞机交替产生不稳定因素的措施。     

丁腈橡胶增韧环氧树脂基烧蚀防热材料性能

以丁腈橡胶(CTBN)为增韧剂对环氧树脂(F51)进行增韧改性,通过FTIR、TG以及力学性能测试研究了丁腈橡胶对环氧树脂固化反应、热稳定性能和力学性能的影响,并分析了其增韧机理;分别采用燃气流剪切烧蚀试验和电弧风动烧蚀实验考核了低密度烧蚀材料的烧蚀性能。结果表明:经CTBN改性后,两者的分子链产生了一定程度的交联;树脂基体的拉伸、弯曲性能有所下降,但韧性得到了增强;热稳定性大大提高,增韧后的F51树脂在800℃时的残重率由增韧前的23%提高到了54%;低密度烧蚀材料的抗剪切、抗剥蚀能力得到了增强,且碳层的尺寸稳定性也得到了改善,烧蚀性能提高。     

Data reduction and correction algorithm for digital real-time processing of cosmic ray measurements: NM64 monitoring at Dourbes

We present a data correction algorithm for real-time data processing for the NM64 galactic cosmic ray neutron monitor at the Royal Meteorological Institute (RMI) in Dourbes, Belgium. The correction is based on three main tests: a continuity test, tube ratios test and a derivative test. The continuity test works as a high pass filter with a threshold based on the entire recorded dataset. Additionally, it monitors whether the logging takes place at regular intervals (continuously). The ratios test identifies noisy sections and the final derivative test criterion will identify single or double spikes by testing them against the median increase of the intensities. Using these criteria, all data from the cosmic ray station at Dourbes is corrected in real time. Test results have been compared with data from verified neutron monitor stations with a similar geomagnetic cutoff rigidity.     

Ionospheric F2-Layer critical frequency retrieved from COSMIC radio occultation: A statistical comparison with measurements from a meridional ionosonde chain over Southeast Asia

In this paper, we compared the F2-Layer critical frequency (foF2) derived from FORMOSAT-3/COSMIC radio occultation (RO) and ionosondes at Chiang Mai, Chumphon and Kototabang during the years 2008–2015 to evaluate the performance of COSMIC RO over Southeast Asia region. The results show that the time development of foF2 values derived from COSMIC RO generally agrees well with those from ionosonde measurements. However, the differences between the foF2 derived from COSMIC RO and that derived from ionosonde observations display latitudinal dependence. COSMIC RO tends to underestimate foF2 at Chiang Mai and Kototabang, which is near to the north EIA crest and the south one, respectively, while a little overestimate foF2 at Chumphon, which is close to the geomagnetic equator. COSMIC RO agrees best with ionosonde at Chumphon and worst at Chiang Mai. At each ionosonde station, the quality of COSMIC RO data degrades with the increase of solar activity. In addition, at the station Chiang Mai and Kototabang, COSMIC RO performs better in summer than in equinox and winter. Furthermore, the differences in foF2 derived from COSMIC RO and that from ionosonde measurements vary with local time, i.e., the differences in foF2 are generally smaller at night and larger in noontime when equatorial ionization anomaly (EIA) is well developed.     

基于CCSDS标准的航天器上行遥控链路 协议体系与可靠性技术

针对航天测控领域中上行遥控业务的协议体系选择与可靠性设计问题,在对我国现行国军标技术指标要求与现有航天测控系统天地基遥控技术特点进行归纳梳理的基础上,基于空间段信息传输无线链路特点与CCSDS(Consultative Committee for Space Data Systems,空间数据系统咨询委员会)标准规范,研究给出了适用于我国航天测控任务的空间段遥控协议体系与可靠性措施,利用梳理统计方法对上行遥控体制进行了数学建模分析,并与CCSDS给出的应用算例进行了对比分析.分析结果表明,所涉及的上行遥控体制与CCSDS标准规范的工作效能基本相当,能够满足我国航天任务上行遥控任务使用需求.     

聚氨酯增韧改性 PISOX 树脂及其复合材料的性能

利用MDI与PTMG-2000制备聚氨酯预聚体,对聚(异氰脲酸酯-噁唑烷酮)树脂(PISOX)进行增韧改性:考察不同I/E、不同预聚体添加量的树脂浇铸体力学性能的变化;并对最优配方进行复合材料力学性能测试和DMTA测试,比较改性前后复合材料力学性能和耐热性能的变化;利用SEM观察改性前后微观形态的变化,推测增韧机理。结果表明,I/E=1.8、添加15%预聚体时树脂浇铸体综合力学性能最优,弯曲强度、弯曲模量、冲击强度分别为60.92 MPa、2 295 MPa、6.40 k J/m2;利用该基体制备复合材料,具有比未改性体系更优异的力学性能和界面性能,且聚氨酯预聚体的引入对树脂在高温下的耐热性能没有明显影响,其玻璃化转变温度均在258℃左右;对比改性前后体系固化物的微观结构,改性后的体系呈两相结构,橡胶相起到吸收冲击能和终止裂纹的作用,有效地提高了材料的韧性。     

一种2812内部FLASH程序远程更新的新方法

仿真器连接DSP进行程序升级给软件维护带来巨大麻烦.利用TMS320F2812芯片的内部丰富资源和支持在线编程的特点,介绍一种应用软件远程更新方法.包括一个通用的BOOT程序和两种生成可烧写文件的方法,满足了TMS320F2812产品的应用开发以及更新维护等需求.方法已应用于多个产品研制中,实验结果表明方法操作方便、加载结果稳定可靠.