平面工艺功率型半导体晶体管铝迁移实验

在平面工艺制造的功率型半导体晶体管芯片表面,发现高强度电场条件下存在跨越0.05 mm半绝缘硅带的铝迁移现象,对此开展了一系列实验研究. 通过开帽物理观察与分析、低温测试与烘干验证、迁移物质分析对比,确定了迁移现象中的迁移物质,同时分别取证环境温度、湿度、芯片表面污染物以及器件局部结构与此迁移现象的关联性,以此提出了迁移机理假说,为在不同的诱发条件下对此迁移机理进行确认和量化研究提供指导.      

HB-2 high-velocity correlation model at high angles of attack in supersonic wind tunnel tests

Responding to a need for experimental data on a standard wind tunnel model at high angles of attack in the supersonic speed range, and in the absence of suitable reference data, a series of tests of two HB-2 standard models of different sizes was performed in the T-38 trisonic wind tunnel of Vojnotehnickˇi Institut(VTI), in the Mach number range 1.5–4.0, at angles of attack up to+30°. Tests were performed at relatively high Reynolds numbers of 2.2 millions to 4.5 millions(based on model forebody diameter). Results were compared with available low angle of attack data from other facilities, and, as a good agreement was found, it was assumed that, by implication, the obtained high angle of attack results were valid as well. Therefore, the results can be used as a reference database for the HB-2 model at high angles of attack in the supersonic speed range, which was not available before. The results are presented in comparison with available reference data, but also contain data for some Mach numbers not given in other publications.     

Mechanical behavior and properties of fiber reinforced ceramic matrix composites for high temperature use

Ceramics can keep their mechanical characteristics up to 2 000℃ or higher.In this paper,A model to predict ultimate strength of continuous fiber-reinforced brittle matrix composites is developed.A statistical theory for the strength of a uni-axially fiber-reinforced brittle matrix composite is presented.Also a semi-empirical frictional heating method for estimating in-situ interfacial shear in fiber-reinforced ceramic matrix composites was improved.Local uneven fiber packing variation as well as uneven micro-damage during fatigue can be expected to have effects on the composites:generation of frictional heating,thermal gradients,and residual stresses around local fiber breaks.This study examined those engineering interests by the finite element method.      

Study on the breakup lengths of free round liquid jets

IntroductionBreakup and atomization of roundliquidjetshad been widely used in internal combustion en-gines,gas turbines,and liquid rocket engines.Recently,with the development of scramjet en-gines and the deepening of fuel atomization re-search,it attract…     

基于信息驱动的保障技术研究

说明了基于信息驱动的维护保障体系的国内外现状及发展趋势,为我国军机的信息化保障工作的开展奠定了技术基础,具体研究内容包括：国内现役军机保障体系现状分析;国外军机保障信息化技术发展状况分析;信息驱动的保障体系特征分析与关键技术的研究。     

基于协调权的案例学习群决策分类方法

基于案例学习的决策方法具有易于理解、贴近 实际决策过程的优点,成为当前决策领域的一个研究热点。文中针对如何有效地集成不同决 策专家提供的案例信息,提出了一种基于协调权的案例学习群决策模型用以解决多属性分类 决策问题。该方法首先针对各决策者给出不同案例数据,通过构建混合整数规划模型,识别 出具有一致案例信息重要度最大化的典型案例集。然后设计了分类阈值远离程度最大化模型 ,以此确定兼容各个决策者案例信息的指标权重（协调权）和最优分类阈值,由此构建一致 性的效用函数并应用获得的阈值进行分类决策。最后通过案例研究以及与其他模型的比较分 析,验证了方法的可行性。     

垫层拉深工艺的试验研究

本文采用试验方法研究了聚乙烯膜在坯料与凹模表面之间的润滑效果，测定了不同润滑方式，ＳＰＣＣ和Ｌ４Ｍ板材的极限拉深系数，分析了采用了聚乙烯膜为润滑的润滑机理。结果表明，垫层拉深工艺能够有效地改善拉深件的表面质量，降低极限拉深系数，使变形程度得到提高。该研究结果对于改善拉深件的表面质量和提高变形程序，具有积极意义。     

一种新颖组合变换器拓扑研究与应用

基于电源模块并联和串联的思想，提出了一种新颖双管正激组合变换器拓扑，克服了双管正激变换器副边二极管电压应力过高，输出电压和电流脉动大，只能应用于输出中低压场合的缺点，具有副边二极管电压应力低，可靠性高，原边开关管电流应力低，输出电压和电流脉动小，磁芯元件体积小等优点，本文对该新颖组合变换器进行分析，仿真和实验，表明适合应用于输入中，高电压，输出高压，大电流场合，并成功应用于某型飞机6KVA逆变器前级变换器，各项技术指标均符合设计要求。     

任务教学法在ESP阅读教学中的应用

以实证研究的方法来检验任务教学法在ESP阅读课程中的实际教学效果。实验对象是48名大三本科生,为期11周的任务教学法对比实验教学,通过对两组被试者的阅读能力的各项测试结果进行组内对比和不同组对比,分析表明任务教学法能够显著提高学生的阅读能力及其ESP学习的兴趣。     

少数民族地区县域经济发展实证研究

采用1995～2010年贵州省玉屏侗族自治县城镇化水平、第三产业增加值、招商引资数量、人均教育支出、R＆D经费投入共五项的时间序列数据,运用普通最小二乘法的实证研究方法,对玉屏县县域经济的增长进行计量研究。结果显示：城镇化水平、第三产业增加值、招商引资数量、人均教育支出、R＆D经费投入都对玉屏县县域经济的增长有正向推动作用,其中招商引资数量推动作用最大,R＆D经费投入推动作用最小。最后根据研究结论提出相应建议。