平板孤立冷却孔下游换热特性实验

为了考察弯曲冷却孔通道对气膜冷却的影响,运用稳态液晶测温技术,对处于横向流中平板孤立圆形直孔和圆形弯曲孔下游的换热特性进行了实验研究。得到了吹风比为0.51、0.8、1.04、1.22下,冷却孔下游附近的冷却效率分布和传热系数的二维分布。实验结果证明:弯曲射流能够有效地提高下游的冷却效率,并且能使气膜具有较强的横向扩展能力,覆盖效果好。但由于其对主流有较强的扰动,所以会增加当地的局部传热系数。     

改革人才培养模式 提高学生实践能力

高职院校是培养高级技能人才的摇篮。结合高职院校教育教学实践,从转变教育观念、深化实践教学内容及方法的改革、在实训基地培养学生工程素质等方面论述了培养学生创新精神与实践能力的途径及方法。     

基于TDLAS的气体检测技术研究

TDLAS技术由于其非接触性、高灵敏度、在线响应速度快等优点,而成为当前气体浓度在线检测技术的重要发展方向之一。确定分子吸收线型函数是应用该技术的前提条件,但是目前尚没有有效的方法在线测量分子吸收线型函数,以至严重影响了TDLAS技术的测量精度,限制了其应用范围。因此,通过吸收光谱理论和波长调制理论研究TDLAS技术中谐波特征参数与分子吸收线型函数的关系,推导出蕴含分子吸收信息的谐波通项表达式,利用谐波信号间的关系特征来消除背景信号、激光强度、调制系数等因素的影响,建立了一种基于谐波信号的绝对吸收强度测量算法。以CO2分子和H2O分子在6982cm-1附近的谱线为例进行数值分析和实验研究,仿真和实验结果表明,根据算法测得的分子吸收光谐波信号谱与理论吸收光谱之间的相对误差不超过5%,进一步提高了TDLAS技术的测量精度,拓宽了其应用范围。     

带根部间隙的直、弯压气机静叶流场的实验

为了获得正弯静叶在动态压气机中的性能特点,分别对采用带根部间隙的直静叶和正弯静叶的重复级低速轴流压气机在不同流量工况下的静叶出口流场进行了实验测量,结果表明,正弯静叶对气流的扩压能力在设计工况和近喘工况下强于直静叶,在最大流量工况下弱于后者。设计工况下,流道内存在的两个主要旋涡结构,分别为上通道涡和刮削涡,且刮削涡在正弯静叶流道内的尺度要远小于直静叶流道中;最大流量工况下直静叶流道中的刮削涡明显增大而正弯静叶中则基本保持不变;近喘工况下分离严重,旋涡随之消失。考查出口气流角可以发现,正弯静叶对气流的折转能力在整个流量工况下都弱于直静叶,但沿叶高的分布更为均匀。     

Variability study of the crest-to-trough TEC ratio of the equatorial ionization anomaly around 120°E longitude

In this paper, latitudinal profiles of the vertical total electron content (TEC) deduced from the dual-frequency GPS measurements obtained at ground stations around 120°E longitude were used to study the variability of the equatorial ionization anomaly (EIA). The present study mainly focuses on the analysis of the crest-to-trough TEC ratio (TEC-CTR) which is an important parameter representing the strength of EIA. Data used for the present study covered the time period from 01 January, 1998 to 31 December, 2004. An empirical orthogonal function analysis method is used to obtain the main features of the TEC-CTR’s diurnal and seasonal variations as well as its solar activity level dependency. Our results showed that: (1) The diurnal variation pattern of the TEC-CTR at 120°E longitude is characterized by two remarkable peaks, one occurring in the post-noon hours around 13–14 LT, and the other occurring in the post-sunset hours around 20–21 LT, and the post-sunset peak has a much higher value than the post-noon one. (2) Both for the north and south crests, the TEC-CTR at 120°E longitude showed a semi-annual variation with maximum peak values occurring in the equinoctial months. (3) TEC-CTR for the north crest has lower values in summer than in winter, whereas TEC-CTR for the south crest does not show this ‘winter anomaly’ effect. In other words, TEC-CTR for both the north and south crests has higher values in the northern hemispheric winter than in the northern hemispheric summer. (4) TEC-CTR in the daytime post-noon hours (12–14 LT) does not vary much with the solar activity, however, TEC-CTR in the post-sunset hours (19–21 LT) shows a clear dependence on the solar activity, its values increasing with solar activity.     

苏通长江大桥主梁断面三分力系数的雷诺数效应

以苏通长江大桥为研究背景,研发了一套测压装置,通过测压法对苏通长江大桥施工状态主梁断面三分力系数进行了现场实测研究,并把现场实测所得结果与风洞试验结果进行了对比,研究了雷诺数对三分力系数的影响。结果表明：雷诺数对阻力系数影响较大,现场实测值比风洞试验所得值小约15％,对升力系数及力矩系数影响较小。因此,针对特大桥梁,在利用风洞实验获取三分力系数时应尽量使雷诺数接近实际情况,否则结果可能偏于保守。     

颗粒冲刷条件下三元乙丙绝热材料烧蚀特性实验

为了研究三元乙丙基础配方、抗过载配方、无SiO2配方和无纤维配方等不同配方绝热材料在颗粒冲刷条件下的烧蚀特性和机理,基于高过载地面模拟试验发动机,开展了烧蚀试验研究。分析了实验后绝热材料的表面以及断面形貌特征和宏观烧蚀率结果,探讨了三元乙丙基础配方和抗过载配方绝热材料炭化层中致密结构形成的机理,进行了不同配方材料的烧蚀模式和机理的分析。研究结果表明:相同颗粒冲刷条件下,不同配方三元乙丙材料烧蚀模式和破坏机理不同,烧蚀率从小到大依次为抗过载配方基础配方无SiO2配方无纤维配方;其中基础配方和抗过载配方三元乙丙材料在烧蚀过程中炭化层形成"致密/疏松"结构,表面形成的致密结构可以提高材料的抗烧蚀性能,无SiO2和无纤维三元乙丙材料以基体的粒状和块状剥落破坏为主;不同配方绝热层炭化层的形貌和结构与纤维、SiO2含量以及烧蚀环境密切相关。     

DORIS system: The new age

The boarding of the first DGXX DORIS instrument on Jason-2 mission gives us the opportunity to present the improvements that have been implemented on the DORIS system. The goal of this paper is to present information about the new capacities of the DORIS system and to give the current status of its components. An overview of the DORIS system, the International DORIS Service and the Jason-2 satellite mission are first presented. Then the new characteristics of the on-board instrument are detailed. The capacity to track up to seven ground beacons simultaneously dramatically increases the number of measurements performed: a factor of three increase over Jason-1 is observed at the altitude of 1330 km. It also increases the diversity of directions of observation and allows low elevation measurements from 0°. The new phase measurements capability allows now phase processing. The instability of the Jason-1 USOs (Ultra-Stable Oven-controlled quartz oscillator) while crossing the South Atlantic Anomaly has been solved by decreasing the sensitivity to radiation by a factor of 10. New features of the on-board software enhance the coastal and inland water altimetry and increase the robustness of the data. The new software also improves the real time orbit accuracy for operational altimetry. The improvements introduced concurrently on the ground segment have also significantly enhanced capability. The new RINEX exchange formats provide simultaneous phase and pseudo-range measurements. The maintenance of the DORIS Beacons Network and the work done by the DORIS Signal Integrity monitoring team lead to an increased availability of the Network from 75% to 90% and so to a more homogenous orbit coverage.     

Investigation of straightforward impedance eduction method on single-degree-of-freedom acoustic liners

In order to address the current aircraft noise problem, the knowledge of impedance of acoustic liners subjected to high-intensity sound and grazing flow is of crucial importance to the design of high-efficiency acoustic nacelles. To this end, the present study is twofold. Firstly, the StraightForward impedance eduction Method (SFM) is evaluated by the strategy that the impedance of a liner specimen is firstly experimentally educed on a flow duct using the SFM, and then its accuracy is checked by comparing the numerical prediction with the measured wall sound pressure of the flow duct. Secondly, the effects of grazing flow and high-intensity sound on the impedance behavior of two single-layer liners are investigated based on comparisons between educed impedance and predictions by three impedance models. The performance of the SFM is validated by showing that the educed impedance leads to excellent agreement between the simulation and the measured wall sound pressure for different grazing flow Mach numbers and Sound Pressure Levels (SPLs) and over a frequency range from 3000?Hz down to 500?Hz. The grazing flow effect generally has the tendency that the acoustic resistance exhibits a slight decrease before it increases linearly with an increase in Mach, predicted successfully by the sound-vortex interaction theoretical model and the Kooi semi-empirical impedance model. However, the Goodrich semi-empirical impedance model gives only a simple linear relation of acoustic resistance starting from Mach zero. Additionally, when the SPL increases from 110 to 140?dB in the present investigation, the acoustic resistance exhibits a significant increase at all frequencies in the absence of flow; however, the resistance decreases slightly under a grazing flow of Mach 0.117. It indicates that the SPL effect can be greatly inhibited when flow is present, and the grazing flow effect can be reduced partly as well at a relatively high SPL.     

智能结构中埋入式光纤传感器的研究

针对复合材料结构试件内部参量的测量提出了一种新型埋入式光纤传感器的研究方案。这种方案是采用双光敏管结构来检测干涉条纹的，运用适当的处理电路来计数条纹的移动量，并判断条纹的移动方向，从而测出复合材料构件内部物理参量的变化。对这种干涉型埋入式光纤传感器用于复合材料试件内部应变测量进行了理论推导，导出了条纹的移动量与应变的关系，并把这种传感器埋入环氧树脂复合材料梁中，对其应变进行了测量，给出了实验装置和