A simple control law for reducing the effective characteristic acceleration of a solar sail

The direction and magnitude of a solar sail acceleration are strongly related. For this reason, once the characteristic acceleration has been fixed, it is not possible to modulate the acceleration in a particular direction. In this work, a semi-analytical switching control law is derived, enabling a solar sail to emulate a smaller effective characteristic acceleration (without changes in geometry or optical properties); by periodically changing the pitch (cone) angle of the sail, in average over time, the acceleration produced by the sail matches exactly (in both direction and magnitude) that of a “smaller” sail. The range in which this is possible is determined, and the limitations on this range due to the size difference is computed. The method is validated on optimal Earth-Mars trajectories.     

卫星CMAC神经网络姿态控制器设计及仿真

为提高传统卫星姿态控制系统精度,提出了一种基于小脑模型(CMAC)神经网络的比例-积分-微分(PID)的复合控制器。给出了具在线学习功能的复合控制器结构,并证明了神经网络学习收敛条件与最终控制目标的一致性。仿真结果表明,设计的控制器具有较好的自适应性和鲁棒性。与传统控制器相比,进入稳定状态的速度更快,指向精度更高。     

视场约束的交会对接V-bar撤离控制研究

利用解析和数值结合的方法研究了在视场约束条件下交会对接V-bar撤离的控制问题。描述了交会对接V-bar撤离的径向冲量机动方案，说明了径向机动撤离方案具有减少羽流污染和故障情况下能够避免飞行器碰撞的优点。基于CW方程推导出了机动点位于V-bar上的特殊情况下径向冲量和视场角的解析公式，同时也得到了求最大视场角时刻和冲量作用后V-bar方向撤离距离的计算公式。对于任意机动点的一般情况，得到了求解径向冲量和视场角关系的非线性方程，这一方程可利用数值方法求解。最后，通过数值仿真验证了该方法的正确性。     

基于扩展块的星载软件控制流容错评价方法

空间环境因素引发的星载软件瞬态的控制流错误可能对系统执行效能造成严重影响，为避免容错算法存储开销和执行开销给系统带入过多的计算压力，提出在容错算法开销和所取得的系统的可靠性提升上取得一定折衷，这是星载软件可靠性设计的合理方向。设计了一种适合于弹性添加容错代码的容错方法：扩展块数字签名的控制流检测方法ESCFC（Extend block Signatures for Control Flow Checking）。由空间高能粒子的实验结果和在轨实测结果为系统可靠度建模，提出了算法开销和可靠性效能提升的平衡关系的工程参考和理论依据。定性分析和模拟，充分说明了将该方法运用于航天工程的可行性。     

一种实时测控集群数据处理进程软件控制方法

在基于集群架构的实时测控系统上,通过软件设计实现一种满足数据处理实时性和系统高可用的集群数据处理进程控制方法。计算节点运行的数据处理进程采用多线程设计,对时间驱动线程和数据驱动线程分别设计了工作信号处理流程。实践证明方法不但能够保证计算节点完成数据处理任务的实时性和可靠性,还能动态完成集群节点的任务迁移和故障恢复,提高了测控集群系统的实时性和可用性,从而有效发挥集群系统架构在测控系统中应用的优势。     

地下建筑物结构裂缝控制

有效控制由于变形作用 (水化热、混凝土干缩和气温温差 )引起的结构裂缝 ,进而防止工程结构的裂漏通病 ,是一个普遍关注的技术难题。本文以广州市滨江东路隧道等工程为实例 ,从结构设计、结构与基础的共同作用、施工技术、材料优选、环境条件及信息化施工等方面 ,介绍有效控制地下结构裂缝的对策和措施     

SNMP协议在测控网远程监控中的应用研究

简要介绍了SNMP（简单网络管理协议）管理模型,基于测控设备C/S（客户/服务器）监控模式现状,分析了测控设备监控信息传输的特点,对现有监控信息传输协议与SNMP协议进行了研究,从传输可靠性、传输效率与协议操作应用等方面进行了比较,并开展了基于SNMP协议的远程监控信息传输试验。试验结果表明,基于SNMP协议可实现测控设备参数与状态监视信息的传输。     

在轨服务的相对运动耦合动力学建模与分析

研究在轨服务航天器逼近与捕获目标航天器的相对轨道姿态耦合动力学建模问题。考虑航天器姿态与对接位置的运动耦合,建立目标运行在任意轨道下的相对轨道姿态耦合动力学模型,并对模型中的运动耦合进行深入分析。设计一种非线性的输出反馈姿态控制律,将建立耦合动力学模型与CW方程进行仿真比较,验证轨道与姿态的运动耦合对两航天器对接点之间相对位置的运动影响。     

Civil unmanned aircraft system operation in national airspace: A survey from Air Navigation Service Provider perspective

Unmanned Aircraft Systems (UASs) have advanced technologically and surged exponentially over recent years. Currently, due to safety concerns, most civil operations of UAS are conducted in low-level uncontrolled area or in segregated controlled airspace. As the industry progresses, both operational and technological capabilities have matured to the point where UASs are expected to gain greater freedom of access to both controlled and uncontrolled airspace. Extensive technical and regulatory surveys have been conducted to enable the expanded operations. However, most surveys are derived from the perspective of UAS own operating mechanism and barely consider interactions of their non-segregated activities with the Air Traffic Management (ATM) system. Hence, to fill the gap, this paper presents a survey conducted from the perspective of Air Navigation Service Provider (ANSP), which serves to accommodate these new entrants to the overall national airspace while continuing flight safety and efficiency. The primary objectives of this paper are to: (A) describe what typical ANSP-supplied UAS Traffic Management (UTM) architecture is required to facilitate all types of civil UAS operations; (B) identify three major ANSP considerations on how UAS can be accommodated safely in civil airspace; (C) outline future directions and challenges related with UAS operations for the ANSP.     

Designing method of acceleration and deceleration control schedule for variable cycle engine

Studies show that different geometries of a Variable Cycle Engine (VCE) can be adjusted during the transient stage of the engine operation to improve the engine performance. However, this improvement increases the complexity of the acceleration and deceleration control schedule. In order to resolve this problem, the Transient-state Reverse Method (TRM) is established in the present study based on the Steady-state Reverse Method (SRM) and the Virtual Power Extraction Method (VPEM). The state factors in the component-based engine performance models are replaced by variable geometry parameters to establish the TRM for a double bypass VCE. Obtained results are compared with the conventional component-based model from different aspects, including the accuracy and the convergence rate. The TRM is then employed to optimize the control schedule of a VCE. Obtained results show that the accuracy and the convergence rate of the proposed method are consistent with that of the conventional model. On the other hand, it is found that the new-model-optimized control schedules reduce the acceleration and deceleration time by 45% and 54%, respectively. Meanwhile, the surge margin of compressors, fuel–air ratio and the turbine inlet temperature maintained are within the acceptable criteria. It is concluded that the proposed TRM is a powerful method to design the acceleration and deceleration control schedule of the VCE.