Influence of pre-tension on ballistic impact performance of multi-layer Kevlar 49 woven fabrics for gas turbine engine containment systems

In this paper, ballistic impact tests on wrapped multi-layer Kevlar 49 woven fabric systems were carried out with a flat blade projectile to investigate the impact response during a fan blade out event. The influences of the number of Kevlar layers and pre-tension were discussed particularly. Test results were used to analyze failure modes and energy absorption characteristics of multi-ply Kevlar fabrics. Results show that there are two kinds of impact damage for fabrics: global deformation mainly involving stretching of yarns in the impact region and fabric wrinkle from both sides to the impact zone, and local damage characterized by yarn fracture, yarn pull-out, and yarn unraveling. The energy absorption capability of Kevlar 49 woven fabrics improves with the number of fabric layers. The energy absorbed by multi-layer fabrics increases slightly at the beginning and then decreases substantially with pre-tension. The work in this paper can provide guidance for designing light-weight multi-layer fabrics containment systems.     

基于波段选择的RX改进算法

针对高光谱检测亚像元飞机的问题,提出基于大气吸收谱段的改进RX异常检测算法,实现亚像元检测能力和检测效率的提升.阐述了改进算法的基本原理,对比了10 km高度和地面大气吸收系数的曲线差异,建立了改进算法的检测模型,采用仿真的客用飞机可见-短波高光谱数据和海水背景高光谱数据,获得了信噪比10 dB的高光谱仿真图像.采用经...     

ZnO/SBA-15无机热控涂层填料及涂层性能

开展高紫外-可见-近红外反射能力热控填料的制备,研制新型低吸收比(α_S)高发射率(ε_H)无机热控涂层。以自制SBA-15和ZnO前驱体为原料通过溶剂热浸渍和高温煅烧法制备ZnO/SBA-15填料,然后与硅酸钾(K_2SiO_3)制备无机热控涂层;采用SAXD、XRD、SEM、太阳反射光谱分析填料和涂层的性能。结果显示采用硝酸锌作为前驱体、m(ZnO)∶m(SBA-15)=3∶7、950℃下烧结3 h可以得到高紫外-可见-近红外反射能力的填料;ZnO/SBA-15/K_2SiO_3无机涂层的α_S为0.09,ε_H为0.91,涂层结合力等级为1级,经过100次-196～100℃热循环实验后,涂层无脱落和开裂现象。SBA-15改性ZnO可以获得具有高紫外反射率和低α_S的热控填料,ZnO/SBA-15填料制备的无机热控涂层同样具备高紫外反射率、低α_S和高ε_H,可以满足航天器高效散热的需求,应用前景良好。     

具有轨道倾角和最大高度约束的耗尽关机闭路制导

快速响应空间固体运载火箭轨道转移级以最大限度利用能量而非消耗能量为目的进行耗尽关机制导,基于椭圆轨道理论和牛顿迭代法,提出了一种适用于具有轨道、制导多种约束的耗尽关机闭路制导方法,通过实时寻找需要推力方向,充分利用轨道转移级能量,导引上面级进入具有给定轨道倾角和最大高度约束的转移轨道,同时实现耗尽关机.理论推导和数学仿真表明,本文提出的制导方法能在耗尽关机条件下实现对转移轨道的高精度控制.     

单壁碳纳米管冲击吸能特性分析

碳纳米管的优异力学特性使其在冲击能量吸收方面存在潜在的应用前景,但纳米尺度的冲击验证实验却难以实现.应用分子结构力学、冲击动力学和纳米尺度有限元相结合的方法,研究了单壁碳纳米管受轴向冲击的吸能特性.使用ANSYS中APDL编程语言,建立了单壁碳纳米管的空间结构参数化模型;同时,采用修正的Morse原子势函数拟合了C-C共价键的本构方程.按照最大失效应变作为共价键断裂的判据,对比了长度、直径和手性对单壁碳纳米管冲击吸能的影响.结果表明:采用这种仿真方法可以动态呈现碳纳米管断裂的全过程,且能够证实单壁碳纳米管的比吸能远高于其他材质类似管状结构,其中,锯齿型碳纳米管的吸能特性又好于扶手椅型.      

Modified energy cascade model adapted for a multicrop Lunar greenhouse prototype

Models are required to accurately predict mass and energy balances in a bioregenerative life support system. A modified energy cascade model was used to predict outputs of a multi-crop (tomatoes, potatoes, lettuce and strawberries) Lunar greenhouse prototype. The model performance was evaluated against measured data obtained from several system closure experiments. The model predictions corresponded well to those obtained from experimental measurements for the overall system closure test period (five months), especially for biomass produced (0.7% underestimated), water consumption (0.3% overestimated) and condensate production (0.5% overestimated). However, the model was less accurate when the results were compared with data obtained from a shorter experimental time period, with 31%, 48% and 51% error for biomass uptake, water consumption, and condensate production, respectively, which were obtained under more complex crop production patterns (e.g. tall tomato plants covering part of the lettuce production zones). These results, together with a model sensitivity analysis highlighted the necessity of periodic characterization of the environmental parameters (e.g. light levels, air leakage) in the Lunar greenhouse.     

Full-scale crash test and FEM simulation of a crashworthy helicopter seat

Crashworthy seat structure with considerable energy absorption capacity is a key component for aircraft to improve its crashworthiness and occupant survivability in emergencies.According to Federal Aviation Administration(FAA) regulations,seat performance must be certified by dynamic crash test which is quite expensive and time-consuming.For this reason,numerical simulation is a more efficient and economical approach to provide the possibility to assess seat performances and predict occupant responses.A numerical simulation of the crashworthy seat structure was presented and the results were also compared with the full-scale crash test data.In the numerical simulation,a full-scale three-dimensional finite element model of the seat/occupant structure was developed using a nonlinear and explicit dynamic finite element code LS-DYNA3D.Emphasis of the numerical simulation was on predicting the dynamic response of seat/occupant system,including the occupant motion which may lead to injuries,the occupant acceleration-time histories,and the energy absorbing behavior of the energy absorbers.The agreement between the simulation and the physical test suggestes that the developed numerical simulation can be a feasible substitute for the dynamic crash test.      

Comparison of Antarctic riometer radio wave absorption and THEMIS mission energetic electron fluxes

Simultaneous observations of in situ plasma properties in the tail of the Earth’s magnetosphere and of ground based instruments, lying on the same geomagnetic field lines, have recently proved to yield significant new results. In most cases magnetosphere ionosphere interactions during the night-time northern hemisphere conditions are studied. Here, observations of energetic electrons in the tail of the Earth’s magnetosphere made by the THEMIS mission satellites are compared with auroral radio wave absorption determined by riometers in the Antarctic for sunlit conditions. Days for which satellites and riometers are connected by the same geomagnetic field line are selected using a geomagnetic field model. The six days analysed show clear associations between fluxes and absorptions in some cases. However, these do not necessarily correspond to conjugacy intervals. Hours of positive associations are 1.65 times those for negative associations, all hours and days considered (1.42–3.6 on five days and 0.58 on the other day). These computations are assumed appropriate since the footprints of the satellites used approximately follow corrected geomagnetic parallels for all six days studied. The use of a finer parameterization of geomagnetic models to determine conjugacy may be needed.     

单壁碳纳米管低能区光吸收性质

采用半经验方法,通过紧束缚理论建立一维近似模型,研究了单壁碳纳米管的态密度,解释了单壁碳纳米管光吸收谱低能阶段出现的3个吸收峰的形成原因。     

空调系统冷热源性能的评价

以西安市某办公大楼为例,借助软件DeST对该大楼供冷季和供暖季的空调动态负荷进行计算的基础上,根据目前冷热源配置状况的调查和该建筑空调负荷的特点,以及能源结构,充分考虑节能,提出了三种具有代表性的技术上比较合理的冷热源组合方案。通过比较各方案的一次能源利用率和能源转换方式的能耗指标,综合评价了各方案的节能潜力。