循环吸湿对炭纤维复合材料界面性能的影响

通过对炭纤维增强复合材料进行70、85、100℃下的循环水浸吸湿试验,研究了复合材料在不同水浸温度下的吸湿-脱湿行为规律。同时,对循环吸湿-脱湿过程中的试样进行层间剪切强度测试和动态力学性能测试,并结合扫描电镜观察循环吸湿各个阶段的纤维基体结合状态。结果表明,水浸温度越高,水分的扩散速率越快,饱和吸湿率越大。经过循环吸湿后复合材料的吸湿行为仍满足Fick第二定律,吸湿后层间剪切强度下降,湿热循环次数越多下降的越明显。脱湿后层间剪切强度有所恢复,水浸温度越高造成的不可逆破坏越大,层间剪切强度恢复的越少。干态时的玻璃化转变温度为231℃,吸湿后下降了37℃。     

多孔介质隔热材料中的辐射热传递分析

新型的多孔材料以其重量轻、强度高备受航天工程设计人员的亲睐,尤其是作为隔热材料使用,可以说是航天工程热防护系统的热门材料.多孔介质在辐射热传递方面具有吸收发射和散射的功能,这些功能在其接受外来热流的作用下,于内部达到热能量平衡,求解这一平衡方程就可以求出辐射热流在材料中的分布.由于求解这一方程的困难,许多学者对材料特性...     

On the Measurements of D/H in QSO Absorption Systems Closing in on the primordial abundance of deuterium

We present our measurements of the deuterium to hydrogen ratio (D/H) in QSO absorption systems, which give D/H = 3.40 ± 0.25 × 10-5 based on analysis of four independent systems. We discuss the properties of two systems which provide the strongest constraints on D/H. We outline the systematic effects involved in measurements of D/H and introduce a sophisticated method of analysis which properly accounts for these effects.     

自然通风和蒸发冷却在新疆建筑应用的数值分析

为了使新疆和田地区夏季在经济性合理前提下使室内通风环境满足人体热舒适要求。利用蒸发冷却技术将室外空气处理后送入室内，通过数值模拟分析得出在夏季室内负荷最大时刻采用机械辅助式自然通风，使得室温能够雏持在26-8℃，风速为0．6m/s，基本满足人体热舒适要求。在室外温度适宜的过渡季节采用Trombe墙和太阳能烟囱复合的自然通风系统，建筑太阳能烟囱的经济高度为10m。     

Solar cycle and latitude dependence of high-beta suprathermal plasma conditions in interplanetary space between 1.3 and 5.4 AU

The analysis of energetic particles and magnetic field measurements from the Ulysses spacecraft has shown that in a series of events, the energy density contained in the suprathermal tail particle distribution is comparable to or larger than that of the magnetic field, creating conditions of high-beta plasma. In this work we analyze periods of high-beta suprathermal plasma occurrences (β_ep > 1) in interplanetary space, using the ratio (β_ep) of the energetic particle (20 keV to ∼5 MeV) and magnetic field energy densities from measurements covering the entire Ulysses mission lifetime (1990–2009) in order to reveal new or to reconfirm some recently defined interesting characteristics. The main key-results of the work are summarized as follows: (i) we verify that high-beta events are detected within well identified regions corresponding mainly to the vicinity of shock surfaces and magnetic structures, and associated with energetic particle intensity enhancements due to (a) reacceleration at shock-fronts and (b) unusually large magnetic field depressions. (ii) We define three considerable features for the high-beta events, concentrated on the next points: (a) there is an appreciable solar-activity influence on the high-beta events, during the maximum and middle solar-cycle phase, (b) the annual peak magnitude and the number of occurrences of high events are well correlated with the sunspot number, (c) the high-beta suprathermal plasma events present a spatial distribution in heliographic latitudes (HL) up to ∼±80°, and a specific important concentration on the low (−25° ? HL < −6°, 6° < HL ? 25°) and median (−45° ? HL < −25°, 25° < HL ? 45°) latitudes. We also reconfirm by a statistical analysis the results of Marhavilas and Sarris (2011), that the high-beta suprathermal plasma (β_ep > 1) events are characterized by a very large parameter β_ep (up to 1732.5), a great total duration (406 days) and a large percentage of the Ulysses-mission lifetime (which is equal to 6.34% of the total duration with usable measurements, and 11.3% of the duration in presence of suprathermal particles events).     

一种用于光传飞控系统的光纤温度传感器研究

利用半导体光吸收原理，设计出一种光纤温度传感器，它可实现强电磁干扰下高空无人机内的环境温度测量，具有体积小，结构简单的特点。该测试仪用GaAs晶片作为温度敏感元件，采用透射式结构，利用双光束补偿原理消除了光路扰动产生的误差。实验结果表明该传感器在-20-85℃的范围内有良好的温度响应。     

Energy conversion of the flare due to direct electric fields from the sheared reconnection

In this paper we present a new mechanism of the main energy conversion of the solar flare. Since a flare inducing prominence (flux tube) rises V_z ? 300 km s⁻¹, the plasmas below it cannot continuously eject with Alfvén speeds of V_A = 3000 km s⁻¹ but probably with V_z ≈ ±100 km s⁻¹. Plasma up and downflows with V_A will within a short duration be blocked between the chromosphere where reconnected flux tubes are piling up, and the slowly rising flux rope. Hence the Petschek slow shock mechanism is difficult to be realized as a major energy converting mechanism.     

太阳能飞行器能源昼夜闭环仿真分析

以能量为核心，建立太阳能飞行器的获能模型；通过对太阳能飞行器飞行剖面特点的分析，设计飞行过程中各个阶段的飞行方案，并建立相应的耗能模型；考虑目前储能电池技术水平，根据产能和耗能模型，建立储能模型，完成了能源闭环模型的设计；参照Zephyr 7太阳能无人机的结构参数对论文建立的模型进行了仿真分析，获取了飞行过程中能量变化规律，同时对飞行姿态进行优化。结果表明：通过对太阳能飞行器昼夜飞行高度的不同设置以及飞行姿态角的优化，太阳能飞行器可以实现跨昼夜持久飞行。     

Increased urinary excretion rates of serotonin and metabolites during bedrest

Astronauts are often on a voluntarily reduced energy intake during space missions, possibly caused by a metabolic or emotional stress response with involvement of the central serotonergic system (SES). We investigated 24 h urinary excretion (24 h-E) of serotonin (5-HT) and 5-hydroxyindol acidic acid as indicators of the SES in healthy males under two different normocaloric conditions: normal physical activity (NPA) and -6 degree head-down-tilt (HDT). HDT or NPA were randomly arranged with a recovery period of 6 months in between. 24 h-E of hormones varied widely among individuals. Values were higher in HDT compared to NPA. Assuming that the 24 h-E values are, beside being indicators for alterations in the number and metabolism of platelets. Also indicators of central SES, HDT condition seems to activate central SES in a higher degree compared to NPA. Therefore, changes in central SES might be involved in the mechanisms associated with space flight or microgravity, including possible maladaptations such as voluntary undernutrition.     

Multiscale eigenelement method for periodical composites: A review

Based on the eigenvector expansion idea, the Multiscale Eigenelement Method (MEM) was proposed by the author and co-workers. MEM satisfies two equivalent conditions, one condition is the equivalence of strain energy, and the other is the deformation similarity. These two equivalent conditions character the structure-preserving property of a multiscale analysis method. The equivalence of strain energy is necessary for achieving accurate macro behaviors such as lower order frequencies, while the deformation similarity is essential for predicting accurate micro behaviors such as stresses. The MEM has become a powerful multiscale method for the analysis of composite structures because of its high accuracy and efficiency. In this paper, the research advances of MEM are reviewed and all types of eigenelement methods are compared, focusing on superiorities and deficiencies from practical viewpoint. It is concluded that the eigenelement methods with smooth shape functions are more suitable for the analysis of macro behaviors such as lower order frequencies, and the eigenelement methods with piecewise shape functions are suitable for the analysis of both macro and micro behaviors.