超弹性N形杆纯弯曲力矩理论建模和试验验证

为了使N形杆在空间结构中顺利展开,对其缠绕过程中的力学特性进行了分析。基于协变基向量法建立了纯弯曲条件下各向同性单片带簧在缠绕时应变能理论模型,并采用最小势能原理推导了弯矩的理论模型,然后通过拟合曲率推导了N形杆缠绕时的理论模型。研制了4根N形杆样件,并搭建了试验平台,使用数显式推拉力计分别对杆件在缠绕过程的拉力进行了5次测试,然后求出峰值力矩,发现试验值与理论值的偏差不大于8.83%,偏差平均值为2.813%,从而验证了理论模型的准确性。该研究可用来分析超弹性杆在纯弯曲状态下的峰值力矩,对超弹性杆在宇航空间中的应用具有重大意义。     

基于自适应模拟退火遗传算法的月球软着陆轨道优化

 将自适应遗传算法与模拟退火算法相结合,形成一种自适应模拟退火遗传算法。该算法不但具备了自适应遗传算法的强大全局搜索能力,也拥有模拟退火算法的强大局部搜索能力。针对月球软着陆轨道优化的特点,利用一种新的参数化方法将轨道优化问题转换为非线性规划问题,并应用提出的自适应模拟退火遗传算法进行优化。数值结果表明：该算法的收敛速度快,优化精度高,且避免了初值敏感、病态梯度和局部收敛等问题,能够搜索到全局最优轨道。     

基于传递函数方法的局部覆盖环状CLD圆柱壳动力学分析

 采用传递函数方法对局部覆盖环状约束层阻尼（CLD）圆柱壳进行了动力学分析。基于Donnell薄壳简化,由Hamilton原理导出了局部覆盖CLD圆柱壳的运动方程和边界条件,通过Laplace变换并引入状态向量后,建立了系统的状态空间方程,利用传递函数方法求解方程得到了系统的固有频率、〖JP2〗损耗因子和频响曲线。算例分析结果验证了该方法的有效性和精确性,且更适于处理黏弹性材料具有频变特性的问题。讨论了CLD覆盖率和黏弹层厚度对系统固有频率和损耗因子的影响,为局部覆盖CLD圆柱壳的优化设计奠定了基础。     

空间飞行器姿态的有限时间跟踪控制方法

 针对带不确定项的空间飞行器系统姿态跟踪控制问题,给出一种基于有限时间控制技术的滑模控制方法。使得姿态跟踪误差系统不仅可在有限时间内从任意状态到达滑动面,而且也可在有限时间内沿滑动面收敛到零,并给出了严格的数学证明。为了避免控制律中的颤动问题,一种新的饱和函数被用来代替控制律中符号函数。数值仿真实验说明了该方法的有效性。     

Periodic Error Compensation for Quartz MEMS Gyroscope Drift of INS

In order to improve the navigation accuracy of an inertial navigation system （INS）, composed of quartz gyroscopes, the existing real-time compensation methods for periodic errors in quartz gyroscope drift and the periodic error term relationship between sampled original data and smoothed data are reviewed. On the base of the results, a new compensation method called using former period characteristics to compensate latter smoothness data （UFCL for short） method is proposed considering the INS working characteristics. This new method uses the original data without smoothing to work out an error conversion formula at the INS initial alignment time and then compensate the smoothed data errors by way of the formula at the navigation time. Both theoretical analysis and experimental results demonstrate that this method is able to cut down on computational time and raise the accuracy which makes it a better real-time compensation approach for periodic error terms of quartz micro electronic mechanical system （MEMS） gyroscope＇s zero drift.     

New Cutting Force Modeling Approach for Flat End Mill

A new mechanistic cutting force model for flat end milling using the instantaneous cutting force coefficients is proposed. An in-depth analysis shows that the total cutting forces can be separated into two terms: a nominal component independent of the runout and a perturbation component induced by the runout. The instantaneous value of the nominal component is used to calibrate the cutting force coefficients. With the help of the perturbation component and the cutting force coefficients obtained above, the cutter runout is identified. Based on simulation and experimental results, the validity of the identification approach is demonstrated. The advantage of the proposed method lies in that the calibration performed with data of one cutting test under a specific regime can be applied for a great range of cutting conditions.     

Revisiting the space-time gradient method: A time-clocking perspective,high order difference time discretization and comparison with the harmonic balance method

This paper revisits the Space-Time Gradient(STG) method which was developed for efficient analysis of unsteady flows due to rotor–stator interaction and presents the method from an alternative time-clocking perspective. The STG method requires reordering of blade passages according to their relative clocking positions with respect to blades of an adjacent blade row. As the space-clocking is linked to an equivalent time-clocking, the passage reordering can be performed according to the alternativ...     

A spanwise loss model for axial compressor stator based on machine learning

In the early stage of aircraft engine design, the through-flow method is an important tool for designers. The accuracy of the through-flow method depends heavily on the accuracy of the loss model. However, most existing models cannot(or cannot well) provide the spanwise loss distribution. To construct an effective spanwise loss model, both turbomachinery knowledge and machine learning skills were used in this paper. A large number of numerical simulations were carried out to build a database con...     

基于双环滑模控制的直/气复合控制系统设计

直/气复合控制导弹具有强干扰、强非线性以及强耦合等特点,传统的姿态控制器难以适用于该种复杂干扰并存的情况,文章提出了基于双环滑模控制的直/气复合控制器。首先采用有限时间收敛趋近律分别构造内外环滑模控制器,并将角速度回路的滑模变量量化为直接力指令,以解决空气舵与姿控发动机之间的耦合问题。接着使用非线性扩张状态观测器估计综合干扰,从而设计控制器补偿侧向喷流干扰及模型不确定性等综合干扰的影响。然后基于李雅普诺夫方法证明了控制系统闭环稳定,分析了干扰补偿对控制器收敛域的影响。最后仿真结果表明,该方法跟踪速度快,动态过程平稳,具有较强的干扰抑制能力,具有很强的鲁棒性。     

捕风一号卫星总体设计与技术特点

捕风一号卫星是中国首次实现基于星载导航卫星反射信号测量(global navigation satellite system-reflection,GNSS-R)技术的气象卫星,采用新型L波段海面风场信息探测技术,在风场测量、海面飓风风速反演等方面为国家气象、防灾减灾等行业提供服务.从系统设计角度介绍了捕风一号卫星的总...