硅化物涂层电子束重熔表面改性技术

在Nb521铌合金表面采用料浆烧结法制备硅化物涂层,利用高频扫描电子束对硅化物涂层进行重熔处理,通过扫描电子显微镜对处理样品表面形貌进行组织结构分析。研究表明,经过电子束重熔处理,硅化物涂层表面陶瓷晶粒粒度降低,表面粗糙度降低,陶瓷颗粒之间烧结作用增强,重熔区域与未处理区域具有明显的边界,电子束能量分布较均匀,电子束重熔提高了硅化物涂层的抗氧化性能和抗热震性能。     

金属增材制造技术应用于军用飞机维修保障浅析

金属增材制造技术的发展为军用飞机维修保障提供了一条数字化、定制化、高性能、短周期的技术新途径,可提升军用飞机维修保障的技术水平和能力。本文综述了军用飞机维修保障的国内外现状,指出了金属增材制造技术的应用优势,介绍了军用飞机零件的典型损伤形式、不同增材制造工艺的适用性及修复工艺选取方案,分析了所涉及的逆向建模、结构优化、智能机器人等关键技术,详述了目前存在的技术成熟度与可靠性不高、修复原则不明确、标准规范不统一等主要问题及解决措施,指出了增材制造技术在军用飞机维修保障领域未来的发展方向和趋势,并给出了具体的应用建议。     

Ionospheric electron density over Resolute Bay according to E-CHAIM model and RISR radar measurements

In this study, predictions of the E-CHAIM ionospheric model are compared with measurements by the incoherent scatter radars RISR at Resolute Bay, Canada, in the northern polar cap. Reasonable coverage was available for all seasons except winter for which no conclusions were drawn. It is shown that ratios of the model-to measured electron densities are close to unity in the central part of the F layer, around its peak. This is particularly evident for summer daytime. Distributions of the ratios are wider for other seasons indicating larger number of cases when the model underestimates or overestimates. E-CHAIM underestimates the electron density at ionospheric topside and bottomside by ～ 10–20 %. At the bottomside, the underestimations are strongest in summer and equinoctial nighttime. At the topside, the underestimations are strongest in autumn nighttime. Model overestimations are noticeable in the middle part of the F layer during dawn hours in autumn. Overall, the model tends to not predict highest-observed peak electron densities and the largest-observed heights of the peak.     

硼酸金属化合物的制备及其电催化活性

采用电化学沉积法于室温、碱性条件下在氧化铟锡(ITO,Indium Tin Oxide)表面制备了硼酸钴(CoBi)、硼酸镍(NiBi)、硼酸锰(MnBi)、硼酸铑(RhBi)、硼酸钯(PdBi)几种无定形的硼酸金属化合物薄膜,并对其形貌和结构进行表征,结果表明几种薄膜均为无定形结构.将这几种硼酸金属化合物应用于电化学催化水氧化制氧,对比其催化活性,发现CoBi,NiBi,RhBi具有较高的催化性能,而MnBi和PdBi催化活性较低.进一步研究硼酸pH值对CoBi电催化水分解的影响.发现硼酸有利于金属化合物的制备,pH7~11范围内,HBO₃^2-作为质子受体含量逐渐增大,能接受放氧过程产生的质子,促进催化水分解过程的进行.所得催化剂可自我修复,实现循环利用.     

Ru过渡层对NiCoCrAlY涂层与DD6单晶高温合金界面扩散行为的影响

针对第二代单晶高温合金DD6开展了一种具有阻扩散功能的金属防护涂层的探索性研究.采用电镀和电子束物理气相沉积(EB-PVD)方法在DD6单晶高温合金上制备了NiCoCrAlY/Ru双层结构涂层,同时采用EB-PVD在单晶合金上沉积了单层NiCoCrAlY涂层.研究结果表明,在1 050℃大气环境中扩散处理300 h后,...     

Pre-storm behaviour of NmF2 and TEC (GPS) over equatorial and low latitude stations in the Indian sector

The pre-storm behavior of NmF₂ and TEC over an equatorial station, Trivandrum (8.47°N, 76.91°E, dip 0.6°S) and a low latitude station, Waltair (17.7°N,83.3°E, dip 20°N) has been studied for a total of 18 strong geomagnetic storms with DST ? −100 nT. The simultaneous measurements of GPS-TEC and NmF₂ over Trivandrum and Waltair during the period 2000–2005 have been considered for the present study. It is found that there is a substantial increase in NmF₂ and TEC before the onset of the storm over Waltair, while the increase is not present at Trivandrum. The origin of pre-storm enhancements in electron density still remains unresolved owing to several conditions in their potential sources and occurrence mechanisms. In the present study an attempt is made to identify the possible mechanisms responsible for such enhancements in electron density of the F-region.     

前后翼型装药结构SRM气固两相流动特性

基于可压缩流动强守恒型Navier-Stokes方程,运用颗粒轨道模型(PTM)和shear stress transfer(SST)k-ω湍流模型,采用计算单元内颗粒源法(PSIC)进行气固两相耦合计算,建立了某型前后翼型装药结构固体火箭发动机(SRM)工作初期的三维两相内流场数值计算模型.对比分析了纯气相和气固两相...     

Study of the Enhancement Events of Relativistic Electron at the Geosynchronous Orbit

The high flux of energetic electron on geostationary orbit can induce many kinds of malfunction of the satellite there, within which the bulk-charging is the most significant that several broadcast satellite failures were confirmed to be due to this effect. The electron flux on geostationary orbit varies in a large range even up to three orders accompanied the passage of interplanetary magnetic cloud and the following geomagnetic disturbances. Upon the investigation of electron flux enhancement events, two types of events were partitioned as recurrent events and random ones. Both of the two kinds of events relate to the interplanetary conditions such as solar wind parameters, IMF etc and their evolution characters as well. As for the recurrent events, we found that, (1) all of the events exhibits periodic recurrence about 27 days, (2) significant increase of electron flux relates to interplanetary index and characters of their distribution, (3) the electron flux also has relation to solar activity index. An artificial neural network was constructed to estimate the flux I day ahead. The random electron flux enhancement events are rare and present different distribution figures to the recurrent ones. The figure of the random events and the conditions of their occurrence is also discussed in this paper.      

CVD技术制备Ta/W层状复合材料

运用化学气相沉积(Chemical Vapor Deposition,CVD)技术制备了W体积分数分别10%,13%和18%的Ta/W两层层状复合材料,采用金相显微镜(OM)、扫描电镜(SEM)和室温拉伸实验对复合材料的性能进行分析。结果表明:运用CVD技术可以制备W体积分数不同,且密度优于理论密度99.4%的层状复合材料;复合材料中Ta,W层的晶粒均为柱状晶粒,离界面越近,晶粒越细;沉积态复合材料的力学性能优于纯CVD Ta和CVD W;1600℃×2 h的热处理后,复合材料的界面扩散层宽度显著增大,力学性能高于沉积态的力学性能,最高抗拉强度可达660 MPa。     

基于碳纳米管薄膜的复合材料层间增韧

通过浮动催化化学气相沉积法制备连续碳纳米管薄膜,并将其原位沉积到单向碳纤维织物表面,手工铺层后借助真空辅助树脂传递模塑成型（VARTM）工艺制备碳纳米管-碳纤维/环氧树脂复合材料层压板,研究不同面密度的碳纳米管薄膜对层压板Ⅱ型层间断裂韧性的影响。结果表明,随着碳纳米管薄膜面密度的增加,层压板Ⅱ型层间断裂韧性先逐渐提高,当碳纳米管薄膜面密度为9.64 g/m²时,层压板Ⅱ型层间断裂韧性最佳,与原始层压板相比提高了94%。碳纳米管通过桥接树脂裂纹、从树脂中拔出等方式提高层间断裂韧性。当碳纳米管面密度超过临界值时,会引起树脂浸润困难,导致增韧效果降低。