飞机机身近区电磁散射建模研究

采用物理光学法和一致性几何绕射理论，分析机身各 球面波照射下的近场电磁散射特性几何绕射并建立其雷达散射截面（ＲＣＳ）数学模型，同时对于复杂机身的前部，采用面元油、即采用双三次Ｂ样条技术对机外形进行拟合，然后再用一致性几何绕射理论进行计算。种方法具有一定的可信度。     

Materials selection for electronic enclosures in space environment considering electromagnetic interference effect

Using low power electronic devices for space applications to reduce the mass and energy consumption has lead to electromagnetic interference (EMI) problem. Electronic enclosures are used to shield electronic devices against EMI. In the past, electromagnetic shielding has been mainly the only criteria considered in electronic enclosure design. However, there are several structural and thermal requirements for selection of shielding materials which should also be taken into account. In this research work, three quantitative materials selection methods, i.e. Digital Logic (DL), Modified Digital Logic (MDL), and Z-transformation, are employed to select the best material from among a list of candidate materials. Composite and metallic electronic enclosures are explored and the best material is selected. Z-transformation method is applicable to both of the considered case studies while DL and MDL can only be used for solving one of them. Z-transformation method ranks aluminum as the first choice among various metallic materials. The wide range of Z-transformation application and its practical results confirm the superiority of Z-transformation method over DL and MDL methods.     

多尺度子域基函数矩量法解的稳定性与迭代法

通过对几个具体实例的计算，证实了在电磁场边值问题的矩量法求解过程中，选用不同的基函数其解的数值稳定性会有很大的差别。从而有可能选择一种数值稳定性比较好的基函数来进行矩量法求解。另一方面，提出了选用多尺度子域基函数，并通过多次迭代来提高矩量法解的精度的算法。实例计算表明，该算法不仅可以有效地降低系数矩阵的条件数，而且还降低了对计算机内存容量的要求，是一种有效的、稳定的算法     

电动式磁悬浮动量球电磁场耦合分析

本文针对电动式磁悬浮动量球(Electrodynamic suspension reaction sphere, EDSRS)的电磁场耦合进行分析，采用定子绕组的感应电动势评判耦合强度，提出了耦合强度评判指标，作为EDSRS的结构设计约束，以降低电磁场耦合的影响。首先，结合EDSRS的具体结构特点，对多定子之间的电磁场耦合问题进行分析，采用定子电磁场在另一个定子绕组中产生的感应电动势评判耦合强度。然后，对感应电动势产生规律进行分析，提出了耦合强度评判指标，并基于所提评判指标，建立了耦合约束验证流程，作为EDSRS的结构设计约束，最后，通过有限元仿真和实验验证了上述电磁场耦合分析。     

机场终端区域电磁环境分析

主要分析了机场终端区域主要使用的无线电设备及位置分布,各种无线电设备对电磁环境的要求以及信号覆盖、信号强度,对可能存在的干扰进行简单的分析,为进一步对机场终端区电磁环境仿真奠定理论基础。最后,本文对广汉机场的电磁环境进行了具体分析。     

部分球壳分布离子流激发的电磁不稳定性

在离子环束流和低频电磁波相互作用的过程中廓了环束流将演化成具有投掷角展宽的部分球壳速度分布离子流,其投掷角展宽随时间增大,低频右旋电磁不稳定性增长率峰值,总的说来也逐渐增大,并向高频短波方向移动,与此相反,低频左旋电磁不稳定性增长率峰值,当投掷 角展宽等于０时,大于右旋不稳定性峰值,但随着投掷角展宽增加而迅速低于右 性增长率峰值,并向工波方向移动。     

被动型星载氢钟H型气体电离模型及参数优化

针对被动型星载氢钟气体电离装置低功耗、低电磁干扰的设计要求,设计了一种基于平面盘绕馈能天线的H型电离系统,并建立该电离方法的数学模型。首先,由Maxwell方程出发,推导出了电离泡中的电场和磁场的分布模型,得到气体电离机制;再由电磁场的分布方程推导出氢气击穿判据表达式,建立了气体电离条件的数学模型;最后,利用电离击穿条件判据方程优化了电离装置的设计参数。数值仿真与测试表明该模型是有效的,采用优化的设计参数可以使电离功耗和电磁干扰特性得到改善,且电离直流电源总功率可小于2W。     

Preparation of CF/Ni-Fe/CNT/silicone layered rubber for aircraft sealing and electromagnetic interference shielding applications

To meet the needs of preventing information leakage in space engineering and military industry, an efficient method was introduced to obtain layered electromagnetic shielding sealing rubber. The carbon fiber, Ni-Fe coating, and Carbon NanoTube (CNT) were combined by chemical plating and in-situ polymerization to obtain a lightweight (0.14 g/cm²) and thin (1 mm thick) Carbon fiber Fabric (CF)/Ni-Fe/CNT/silicone layered electromagnetic shielding composites. The layered material obtained by adjusting the electroless plating time exhibited a high Shielding Efficiency (SE) of 60.2–85.5 dB in the range of 0–4800 MHz, which can be used for aviation electromagnetic shielding. Carbon fibers and carbon nanotubes mainly attenuated electromagnetic waves through absorption loss, while the nickel-iron alloy coating through reflection loss interacted with the magnetic vector of incident ElectroMagnetic (EM) radiation and magnetic dipoles, therefore, the EM Interference (EMI) shielding composite attenuated EM waves with the “absorption-reflection-absorption” cooperative interaction. Moreover, the flexible fabric substrate adhered with silicone rubber possessed a breaking elongation of 52.3%, which can be utilized as a good sealing material. Simultaneously, the outstanding exothermicity (67.2 °C under the applied voltage of 5 V) makes it possible to be applied in electric heating area. The electromagnetic shielding composites prepared in this paper have good potential in the fields of precision electronic equipment and aviation systems.     

一种基于可靠性数学的电磁兼容性分析方法研究

以系统可靠性预计理论为切入点,分析系统可靠性与系统级电磁兼容性的关联性。分析基于电磁干扰"三有限"和可靠性"三规定"的电磁兼容性预测方法。初步建立系统级电磁兼容性指标和性能降级的准则,给出包括串联、并联、混联等几种典型的系统电磁兼容预测模型和预测方法,最后得出基于可靠性预计理论的系统级电磁兼容预测公式,进而为预测电磁兼容性奠定了条件。采用所提方法对某军用计算机系统进行系统级的电磁兼容性预测,预测结果证明了方法的有效性及可实施性。     

电沉积ZrO2/Ni纳米复合材料低温高应变速率超塑性的研究

采用电沉积方法制备了平均晶粒尺寸为45nm的ZrO2/Ni复合材料,并通过拉伸和胀形试验对该材料的超塑性能进行了研究。拉伸试验结果表明:材料在温度为420~500℃,应变速率为8.33×10-4s-1~1.67×10-2s-1时均获得了高于200%的延伸率。在温度为450℃和应变速率为1.67×10-3s-1时,得到最大延伸率605%。用扫描电镜SEM对拉伸前后试件的显微组织进行了观察,发现晶粒在温度的作用下明显长大。采用内径5 mm的凹模对ZrO2/Ni复合材料进行超塑胀形试验,在温度为420~500℃获得高径比H/d高于0.5的胀形件,说明该材料具有良好的超塑性能。