螺旋形纳米碳纤维的电磁波吸收特性分析

根据手征材料的本构方程,讨论了螺旋形手征纳米气相生长碳纤维(VGCF)手征参数ξ与电磁参数ε,μ的关系,并分析螺旋形VGCF几何结构产生的手征特性,与电磁波相互作用时产生电磁交叉极化的耦合吸收电磁波的机理,研究了改善手征材料ξ和性能的方法。结果表明,取螺旋形VGCF半径与螺距比为0.23左右,增加手征体含量可改善手征介质的手征参数,手征体的含量适当、螺旋形VGCF的尺寸与电磁波的波长接近能提高材料的吸波能力。     

国内对横电磁传输室的研究

主要论述如下几个问题:(1)我国学者对横电磁传输室理论的研究情况及成果;(2)对高阶模的模式判别、截止频率、谐振频率、最高可用频率问题的讨论;(3)关于我国学者提出的设计上的新思想和新方法;(4)对未来的展望及建议。对某些国内学术界尚有分歧的问题作了研讨,提出了横电磁传输室电压驻波比第一谐振峰频率与横向尺寸关系的经验曲线,讨论了与研制GTEM有关的问题。     

电子回旋共振中和器内静磁场及微波电磁场的数值计算

为了研究电子回旋共振中和器内静磁场和微波电磁场的分布规律,设计合理的磁路结构以形成电子回旋共振区,并使微波强电场区与电子回旋共振区重合,采用有限元分析软件对中和器内的静磁场和微波电磁场进行了数值计算。计算结果表明:永磁体及磁轭的尺寸均影响电子回旋共振区的分布;天线伸入长度越长,微波电场越强。微波频率为4.2GHz时,六块相同的长12mm,宽8mm,高5mm的条形永磁铁与磁轭组成的磁路结构,可以产生合理的电子回旋共振区。L型天线伸入长度为5mm时微波强电场区可与电子回旋共振区重合。     

Electromagnetic riveting technique and its applications

With the increasing applications of novel materials and structures in new-generation aircraft, conventional joining techniques in aircraft component assembly are greatly challenged. To meet those challenges, the electromagnetic riveting (EMR) technique was developed as an advanced joining tool, which exhibits obvious advantages in the assembly of new-generation aircraft. In this paper, the riveting principle of EMR was analyzed, and its development history and status were presented in detail. Then, equipment features of three typical EMR systems were given. Moreover, three important applications of EMR were covered, i.e., composite structure riveting, titanium rivet and large-size aluminum rivet riveting, and interference fit bolt installation. Specially, a novel strengthening method for mechanical linking holes based on EMR was also presented, which can significantly improve the fatigue behaviors of mechanical joints. Finally, open questions in the EMR field were discussed, and some recommendations for future work were also made. This paper can be useful for optimizing the joint designs of aircraft components and improving the level of aircraft maintenance.     

常闭式电磁制动器驱动结构设计及性能分析

针对常闭式电磁制动器耗能高、制动力密度小、励磁线圈发热严重等缺点，尝试将永磁体引入至制动器驱动结构中，设计出了一种电磁与永磁混合作用的新型电永磁驱动结构。结合有限元软件，采用有限元法分析了其内部磁通量分布并研究励磁线圈电流、气隙及永磁体结构形状等因素对电磁力的影响。结果表明，电磁与永磁两磁场耦合性较好，电磁吸力随电流增加及气隙的减小增幅较大，且同等条件下L形永磁体的电磁驱动结构对衔铁的吸力最大，对电磁制动器轻量化研究具有指导意义。     

Ground-based and satellite DC-ULF electric field anomalies around Wenchuan M8.0 earthquake

The ground-based and satellite DC-ULF electric field data were analyzed around Wenchuan M8.0 earthquake on May 12, 2008 in China. The results show that ground electric field anomalies occurred at 3 stations located to the north and south of the epicenter with the amplitude of 3–100 mV/km. The change shapes and their amplitude of ground electric field anomalies are different largely due to their individual underground layer conductivity, water level and so on. The analysis of long time series illustrates that the abnormal geoelectric field started since March 2008. Onboard the DEMETER satellite, the ULF waveforms of electric field were collected and processed by wavelet transform method. The disturbances in the ionosphere were about 3–5 mV/m at a frequency band lower than 0.5 Hz. When the ground and space electric field anomalies were compared, their occurrence time and spatial distribution points are consistent with each other, including the long time anomalies from March 2008 and the short term ones 1–2 days before the Wenchuan earthquake. Finally, the coupling mechanism was discussed.     

纳米磁性金属电磁波吸收剂

分析了纳米磁性金属电磁波吸收剂的吸波原理,综述了纳米磁性金属电磁波吸收材料如零维磁性纳米颗粒、一维磁性金属纳米线、二维磁性薄膜、二维片状磁性金属颗粒的国内外研究进展情况,并对未来的研究方向提出见解。     

常闭式电磁制动器驱动结构设计及性能分析

针对常闭式电磁制动器耗能高、制动力密度小、励磁线圈发热严重等缺点,尝试将永磁体引入至制动器驱动结构中,设计出了一种电磁与永磁混合作用的新型电永磁驱动结构。结合有限元软件,采用有限元法分析了其内部磁通量分布并研究励磁线圈电流、气隙及永磁体结构形状等因素对电磁力的影响。结果表明,电磁与永磁两磁场耦合性较好,电磁吸力随电流增加及气隙的减小增幅较大,且同等条件下L形永磁体的电磁驱动结构对衔铁的吸力最大,对电磁制动器轻量化研究具有指导意义。     

Prospects of de-tumbling large space debris using a two-satellite electromagnetic formation

Capturing large space debris with complex rotational motion is extremely challenging. A de-tumbling phase before capturing may be necessary to reduce the risk of collision with debris. This paper proposes a new noncontact de-tumbling method using a two-satellite electromagnetic formation, in which two small electromagnetic satellites, each having a high-temperature superconducting coil, generate control torques to reduce the rotation rate of debris prior to making any physical contact. The electromagnetic interaction of the target-satellite system is analyzed. A relative translational dynamics of the target–satellite system and the attitude dynamics of the target are established. Simulation results show that the proposed method effectively eliminates the rotational motion of the target. It can be safely concluded that the noncontact method for de-tumbling space debris using a two-satellite electromagnetic formation is feasible and potentially applicable to on-orbit capture.     

航天器天线有关技术的论述

论述了航天器天线的特点及其与航天器总体的关系;天线的辐射场方向图及增益有关问题;天线的电磁兼容及天线的计算机辅助设计。