ANALYSIS OF AN ELECTROSTRICTIVE STACK ACTUATOR FOR ACTIVE TRAILING EDGE FLAPS

Helicopter is a complex dynamic system withmany rotating components. The rotor blades oper-ate in a highly complex aerodynamic environment.The vibratory hub load,which is caused by cyclicvariation ofcentrifugaland aerodynamic load of therotating bladesin flight,is transmitted to the fuse-lage,resulting in serious vibration and noise of thestructure. It is one of the most important excitingsources in helicopters.There has long been a desire to reduce heli-copter vibration and to improve its per…     

Review on signal-by-wire and power-by-wire actuation for more electric aircraft

The huge and rapid progress in electric drives offers new opportunities to improve the performances of aircraft at all levels:fuel burn,environmental footprint,safety,integration and production,serviceability,and maintainability.Actuation for safety-critical applications like flight-controls,landing gears,and even engines is one of the major consumers of non-propulsive power.Conventional actuation with centralized hydraulic power generation and distribution and control of power by throttling has been well established for decades,but offers a limited potential of evolution.In this context,electric drives become more and more attractive to remove the natural drawbacks of conventional actuation and to offer new opportunities for improving performance.This paper takes the stock,at both the signal and power levels,of the evolution of actuation for safety-critical applications in aerospace.It focuses on the recent advances and the remaining chal lenges to be taken toward full electrical actuation for commercial and military aircraft,helicopters,and launchers.It logically starts by emphasizing the specificity of safety-critical actuation for aero space.The following section addresses in details the evolution of aerospace actuation from mechanically-signaled and hydraulically-supplied to all electric,with special emphasis on research and development programs and on solutions entered into service.Finally,the last section reviews the challenges to be taken to generalize the use of all-electric actuators for future aircraft programs.     

直升机后缘襟翼驱动器迟滞现象仿真与抑制

直升机后缘襟翼多采用压电驱动器作为驱动元件，但是在使用过程中压电驱动器迟滞会对其振动控制性能产生不利影响，因此针对压电驱动器迟滞开展了迟滞建模与抑制研究。通过实验研究了压电驱动器在不同驱动频率下的迟滞特性，采用Bouc-Wen模型对驱动器迟滞现象进行了建模，并采用粒子群算法（PSO）辨识模型参数，与实际测量迟滞曲线进行了对比，在10~60 Hz范围内所建立的迟滞模型能够较为精确地描述压电驱动器迟滞现象。建立了基于Bouc-Wen逆模型的前馈补偿控制与PID反馈控制相结合的复合控制策略，实验结果显示该控制策略能够在10~60 Hz较宽的频率范围内有效抑制该压电驱动器迟滞现象。建立了考虑驱动器迟滞的主动控制后缘襟翼振动控制动力学模型，并对中等速度稳态前飞条件下后缘襟翼振动控制性能进行了仿真，仿真结果显示驱动器迟滞会在一定程度上削弱振动控制性能，而采用复合控制可以提高后缘襟翼旋翼振动控制性能。     

Spacecraft formation flying control around L2 sun-earth libration point using on–off SDRE approach

In this paper, on–off SDRE control approach is presented for spacecraft formation flying control around sun-earth L2 libration point. Orbits around libration points are significant targets for many space missions mainly because of efficient fuel consumption. Furthermore, less propellant usage can be achieved by considering optimal control approaches in spacecraft formation flying control design. Among various nonlinear and optimal control methods, SDRE has shown to be a popular controller in various missions due to the privileges including efficiency, accuracy and robustness. The spacecraft are assumed to have on–off thrusters as actuators. It requires them to be fed with a sequence of on–off pulses which is regarded as a challenge for spacecraft designers. Hence, the main contribution of this paper is designing an on–off SDRE approach for the formation flight around sun-earth L2 point with uncertainty with energy and accuracy considerations. Including on–off input as a constraint is not feasible for SDRE implementation because it makes the system non-affine. An alternative is utilizing an integral action technique and an auxiliary control to make the system affine which leads to on–off SDRE approach. It has also been shown that the proposed method is robust against parametric uncertainties of the states. Present study aims to design an energy-beneficial, simple and attractive controller for a complex nonlinear system with on–off inputs and uncertainty in CRTBP. Simulation results show that the on–off SDRE control could provide the formation flight around L2 point with high accuracy using less energy consumption.     

作动器故障下的无人机容错控制方法

在执行任务过程中,无人机的传感器、作动器等均可能出现故障。文章针对常规布局无人机的作动器故障,提出了 1种反步法和控制分配相结合的容错控制方法。首先,建立无人机数学模型,并对作动器故障进行分类和建模;然后,根据模型设计反步最优控制器和基于控制分配的容错控制器;最后,通过仿真验证表明,所设计的容错控制方法能够实现作动器故障下的姿态快速稳定控制,且稳定性好,基本无侧滑角,各操纵面均在约束范围内,达到容错控制要求。     

椭圆微驱动电火花加工装置中电极运动的微机控制

为实现椭圆微驱动器的最佳频率响应，需准确调整压电元件驱动源的频率，为此设计了用MCS51单片机控制的电极运动驱动电路。     

飞机电静液作动器滑模 PID控制器设计

在多电飞机应用环境中,由于电静液作动器（Electro Hydrostatic Actuator,以下简称EHA）系统本身的强非线性与承载交变动载荷的不确定性,简单PID控制无法达到理想控制效果。提出了滑模 PID复合控制,电机电流环和转速环构成控制系统内环,以PI控制器实现电机调速;作动筒位置环为外环,以滑模控制提升系统的快速性和鲁棒性。建立了EHA数学模型,并设计了滑模控制器结构。仿真结果表明,滑模 PID复合控制方法能有效地消除超调和减小跟随误差,实现对EHA位置的精确控制。     

柔性铰链放大式超磁致伸缩致动器磁弹耦合模型

针对超磁致伸缩致动器(GMA)输出位移有限的问题,采用柔性铰链放大机构放大GMA输出位移,利用材料力学理论、拉格朗日动力学方程和有限元法对柔性铰链放大机构的位移放大倍数、动力学特性进行了分析.结合Jiles-Atherton(J-A)模型和二次畴转模型建立了柔性铰链放大式GMA的磁弹耦合模型,并在软件AMESim&Simulink联合仿真环境中进行了数值仿真.制作了柔性铰链放大式GMA样机,对其进行了动态性能实验,仿真和实验表明:经过放大,柔性铰链放大式GMA输出位移可以达到0.4mm;频带宽超过100Hz;所建立的磁弹耦合模型是有效的.      

使用混合执行机构的快速机动卫星力矩分配算法

针对单框架控制力矩陀螺群（SGCMGs）存在奇异和单框架控制力矩陀螺（SGCMG）存在框架转速死区的问题,研究了SGCMG与飞轮联合作为执行机构的控制力矩分配算法,以SGCMG功耗、飞轮功耗和飞轮角动量的二次型加权矩阵求和为性能指标,提出了一种形式简洁的混合执行机构力矩分配算法,通过分析,证明该分配算法能够有效的避免SGCMGs的奇异;设计了一种SGCMG功耗加权矩阵的调节策略,解决了SGCMG陷入转速死区的问题,设计了一种飞轮角动量加权矩阵的调节策略,通过对加权矩阵的实时调节实现了对飞轮角动量的管理,解决了飞轮转速的饱和与过零问题。数学仿真结果验证了该力矩分配算法的有效性。     

大功率狭缝式活塞激励器流场测量与分析

研制了一种大功率活塞射流激励器,出口瞬时速度峰值可达0.3Hz,通过对活塞激励器射流流场测量,得到激励器出口流场速度、涡量分布,分析得到激励器合成射流流动结构与特征,通过采用活塞激励器控制同轴射流掺混,实验结果证明此种活塞激励器可以用于相对较高的速度流场的主动流动控制.利用提出的设计方法设计合成射流激励器可以在激励器出口形成稳定的对涡结构,采用一定的激励频率即可对喷管气流掺混进行有效控制.研究表明,合成射流激励器作为主动流动的执行机构,在航空动力排气系统具有潜在的重要价值.