Electrochemical micromachining of micro-dimple arrays on cylindrical inner surfaces using a dry-film photoresist

The application of surface textures has been employed to improve the tribological performance of various mechanical components. Various techniques have been used for the application of surface textures such as micro-dimple arrays, but the fabrication of such arrays on cylindrical inner surfaces remains a challenge. In this study, a dry-film photoresist is used as a mask during through-mask electrochemical micromachining to successfully prepare micro-dimple arrays with dimples 94 lm in diameter and 22.7 lm deep on cylindrical inner surfaces, with a machining time of 9 s and an applied voltage of 8 V. The versatility of this method is demonstrated, as are its potential low cost and high efficiency. It is also shown that for a fixed dimple depth, a smaller dimple diameter can be obtained using a combination of lower current density and longer machining time in a passivating sodium nitrate electrolyte.     

钛合金TC4的超硬磨料柔性抛光轮数控抛光试验研究

航空发动机叶片钛合金材料在数控磨抛加工中容易发生烧伤及黏附现象,针对常用的TC4材料开展了超硬磨料柔性抛光轮数控抛光试验研究。分析了超硬磨料柔性抛光轮抛光参数中转速、进给速度、预压量及行距对抛光去除深度及抛光后试件表面粗糙度的影响规律并通过正交试验分析了各抛光参数影响的主次关系。确认了钛合金试件抛光表面黏附物质成分,并同时分析了表面黏附物的形成原理。给出了TC4钛合金材料在超硬磨料柔性抛光轮数控抛光过程中工艺参数的选择策略,为TC4材料的航空发动机叶片和整体叶盘在超硬磨料柔性抛光轮数控抛光过程中提供理论依据和技术基础。     

超精密加工中研抛分布力测量方法的探讨

在研磨盘的不同位置打深盲孔,近于贯穿,仅留下薄薄一圆形平膜片,作为抛光法向压力的敏感元件。此圆平膜片半径,厚度由位移敏感元件灵敏度及抛光所容许的外扰（对实际工作状态影响足够小）决定。在此孔中安置光纤位移传感器测量圆平膜片的变形位移,就可解算出抛光时研磨盘的局部压力。信号调制后通过多路遥测装置或电刷滑环等集流器将信号引出。     

航空发动机叶片柔性抛光技术

 基于发动机叶片结构特点及其抛光工艺要求,为实现叶片型面及阻尼台自动化抛光,满足其型面及进排气边尺寸、粗糙度等质量要求,消除叶片型面波纹对抛光工艺的影响,对砂带柔性抛光工艺装备技术进行研究,提出基于抛光力控制的砂带柔性磨头抛光工艺方法,并对其抛光工艺过程、抛光力控制进行研究,通过对叶片自动化抛光编程及抛光轨迹路径规划技术研究,最终实现发动机叶片高效柔性抛光工艺。抛光试验结果表明,柔性自动化抛光后叶片型面尺寸精度可达±0.06 mm,粗糙度低于R_a0.4,与传统手工抛光方法相比,大大提高其抛光效率及表面质量稳定性,降低劳动强度,且减少粉尘污染。     

类芬顿反应在碳化硅光学材料研抛中的作用

本文讨论了以零价铁代替亚铁盐形成类芬顿反应(Fenton-Kind process)体系应用于碳化硅光学材料抛光过程中的反应机理,通过双转子研抛机床对SiC光学材料进行了研抛实验,验证了类芬顿反应能够有效地提高SiC材料的加工效率和加工质量。通过对比不同磨料粒度研抛液加工结果,获得了SiC材料研抛过程中化学与机械作用规律。     

Trajectory control strategy of cathodes in blisk electrochemical machining

A turbine blisk, which combines blades and a disk together, is one of the most important components of an aero engine. In the process of blisk electrochemical machining (ECM), the sheet cathode, which is usually used as a tool electrode, has a complicated structure. In addition to that, the channel between the adjacent blades is narrow and twisted, so interference is apt to happen when the sheet cathode feeds into the channel. Therefore, it is important to choose suitable trajectory control strategy. In this paper, a new trajectory control strategy of the sheet cathode is presented and corresponding simulation analysis is conducted on the basis of an actual blisk model. The simulation results demonstrate that the sheet cathode can feed into the channel by a spatial line trajectory without interference. Moreover, the verification experiments are carried out according to the simulation. The experimental results show that the cathode can move into the channel without interference. It is verified that the new trajectory control strategy is correct and can be used in the blisk ECM process successfully.     

用于SiC超光滑表面加工的大气等离子体抛光系统设计

设计了一套基于射频电容耦合放电原理的大气等离子体抛光原型装置,电容耦合等离子体炬首次被应用到了抛光系统中。针对SiC反射镜的加工实验结果表明,系统工作正常,并可以实现亚纳米级的表面粗糙度。     

浮力磨粒球性能对工件抛光影响的实验研究

从制作浮力磨粒球材料的性能参数和加工参数入手,综合考虑影响抛光加工的多种因素,应用实验分析方法,研究了磨粒球的直径、磨粒球的层厚和浮力磨粒球抛光工件时的去除量、加工件表面品质的关系.并对抛光工件时浮力磨球的浮力对工件抛光的影响作了分析.     

Interconnected Ni（OH）2 and polyether amine on carbon fiber surface for simultaneously improving interfacial adhesion of epoxy composites and electrochemical properties

Interconnected Ni（OH）₂ nanoflakes and polyether amine（PEA） were deposited on carbon fiber tows via a facial and effective process of chemical bath deposition and dip coating. Based on this, a win–win benefit of simultaneously improvements in interfacial shear strength（IFSS） of carbon fiber/epoxy composites and the electrochemical activity has been achieved. Compared with CF and CF-Ni（OH）₂ composites, the IFSS of CF-Ni（OH）₂-PEA/epoxy composite respectively increas...     

(TiB+TiC)/TC4复合材料电解钻孔试验研究

钛基复合材料是一种典型的难加工材料,采用传统机械加工方法存在加工效率低和加工质量差等问题。利用电解加工技术,采用直径为10mm的管状阴极,对(TiB+TiC)/TC4复合材料进行电解钻孔加工试验研究。进行了(TiB+TiC)/TC4复合材料的电化学特性研究,测量了(TiB+TiC)/TC4复合材料在10%NaNO₃溶液中的极化曲线和电流效率。探究了加工电压、电解液压力对加工精度的影响。结果表明,当加工电压为30V,电解液压力为0.6MPa时,电解钻孔可以在1mm/min的进给速度下稳定加工。当加工的盲孔深径比为3.06时,孔的圆度误差为41.1μm,锥度为0.4°,具有较高的加工精度。