复杂曲面零件五轴加工刀轴整体优化方法

 针对复杂曲面零件五轴加工中刀轴矢量变化剧烈、严重影响工件表面加工质量的问题,提出一种基于临界约束的五轴刀轴矢量整体优化方法。首先,构造了给定切触点处所有可行摆刀平面,并在摆刀平面内根据临界约束计算出临界刀轴矢量,在获得临界刀轴矢量的基础上,对其进行平面映射,建立了刀轴摆动的初始可行域;其次,通过对初始可行域进行均匀离散,根据离散点之间相对位置关系构造邻接矩阵,并结合最短路径搜索算法获得了初始参考刀轴,从而构造了新的刀轴摆动可行域;最后,建立当前切削行内无干涉且相邻刀轴变化最小的刀轴矢量优化模型,实现自由曲面五轴加工无干涉刀轴矢量的光滑控制。两种自由曲面叶轮的加工算例分析表明,采用本文方法获得的刀轴矢量可以明显改善机床的运动性能,避免了刀具干涉的产生,可提高复杂曲面零件的加工质量与效率。     

A novel testability model for health management of heading attitude system

Prognostics and health management (PHM) is very important to guarantee the reliability and safety of aerospace systems, and sensing and test are the precondition of PHM. Integrating design for testability into early design stage of system early design stage is deemed as a fundamental way to improve PHM performance, and testability model is the base of testability analysis and design. This paper discusses a hierarchical model-based approach to testability modeling and analysis for heading attitude system health management. Quantified directed graph, of which the nodes represent components and tests and the directed edges represent fault propagation paths, is used to describe fault-test dependency, and quantitative testability information is assigned to nodes and directed edges. The fault dependencies between nodes can be obtained by functional fault analysis methodology that captures the physical architecture and material flows such as energy, heat, data, and so on. By incorporating physics of failure models into component, the dynamic process of a failing or degrading component can be projected onto system behavior, i.e., system symptoms. Then, the analysis of extended failure modes, mechanisms and effects is utilized to construct fault evolution-test dependency. Using this integrated model, the designers and system analysts can assess the test suite’s fault detectability, fault isolability and fault predictability. And heading attitude system application results show that the proposed model can support testability analysis and design for PHM very well.     

Wire electrochemical machining with axial electrolyte flushing for titanium alloy

Titanium and its alloys have found very wide application in aerospace due to their excellent characteristics although their processing is still a challenge. Electrochemical machining is an important issue in the fabrication of titanium and titanium alloys. Wire electrochemical machining (WECM) is mainly used for workpiece cutting under the condition of different thickness plates. It has a great advantage over wire electro-discharge machining, which is the absence of heat-affected zone around the cutting area. Moreover, the wire electrode in WECM could be used repetitively because it is not worn out. Thus, much attention has been paid to WECM. The effective way of removing electrolysis products is of importance to WECM. In this paper, the axial electrolyte flushing is presented to WECM for removing electrolysis products and renewing electrolyte. The Taguchi experiment is conducted to optimize the machining parameters, such as wire feedrate, machining voltage, electrolyte concentration, etc. Experimental results show that WECM with axial electrolyte flushing is a promising issue in the fabrication of titanium alloy (TC1). The feasibility of multi-wire electrochemical machining is also demonstrated to improve the machining productivity of WECM.     

毛刺和加工精度对涡轮流量影响的数值模拟

为了研究喷嘴内壁毛刺和内壁尺寸加工精度对涡轮流量的具体影响,采用数值计算方法对液动涡轮泵喷嘴机构的单喷嘴内部流动进行数值模拟。通过对比计算结果与试验结果,以及分析计算所得流场细节,表明各工况点计算值与试验值的变化趋势基本一致;毛刺和加工精度对涡轮流量都会产生影响,但相对于加工精度,毛刺是影响涡轮流量的主要因素。     

薄壁叶片叶型多工序加工检验模型建立方法

为了提高叶片的加工质量、降低叶片成品的废品率和加工成本，以航空发动机薄壁叶片数控铣削、抛光、振动光饰、喷丸强化的典型加工工艺为研究对象，提出了一种面向多工序的加工变形误差补偿方法及加工检验模型的建立方法。分析各工序的加工变形规律，将多工序变形误差作为一个整体，利用反变形误差补偿方法建立数控精铣工序的加工模型。图纸要求的理论模型只作为最终检验模型，而工序检验模型根据后续加工误差累加对最终检验模型修改得到。通过实例验证，该方法有效地降低了叶片工序检验结论的误判率，保证了工序检验合格及最终检验合格的要求。     

SCC evaluation of a 2297 Al-Li alloy rolled plate using the slow-strain rate technique

The stress corrosion cracking (SCC) susceptibility of 2297 Al-Li alloy in 1 M NaCl + 0.01 M H₂O₂ solution (CP solution) and 1 M NaCl + 0.01 M H₂O₂ + 0.6 M Na₂SO₄ solution (CPS solution) was investigated by slow-strain rate tests at various strain rates ranging from 10⁻⁵ s⁻¹ to 10⁻⁷ s⁻¹. The roles of H₂O₂ and SO₄²⁻ in the corrosion process were estimated by potentiodynamic polarization and electrochemical impedance spectroscopy. 2297 Al-Li alloy does not fracture ascribed to SCC in CP solution, while it undergoes SCC in CPS solution. In CPS solution, with a decreasing strain rate from 10⁻⁵ s⁻¹ to 10⁻⁷ s⁻¹, the SCC susceptibility firstly rises and then declines exhibiting a peak value at a strain rate of 10⁻⁶ s⁻¹. H₂O₂ promotes the active dissolution while SO₄²⁻ lowers the corrosion rate. The SCC fracture is associated with a decline in the dissolution rate of the crack tip by SO₄²⁻, which leads to stress concentration. In CPS solution, a reduction in the local dissolution rate of the crack tip leads to stress concentration, resulting in SCC fracture. As the preferred initiation site for a crack, pits also show a noteworthy effect on SCC of 2297 Al-Li alloy.     

基于图像骨架和贪婪算法的无人机航路规划

针对无人机在执行低空突防任务时最大生存概率以及自身飞行约束的要求,对传统的人工势场法进行改进,提出基于图像骨架和贪婪算法的航路规划方法.对可飞区域提取图像骨架生成赋权图,采用Dijkstra方法搜索最小代价路径实现航路初规划;提出了曲率可控的贪婪算法对初规划结果进行优化,使最终的路径同时满足最小转弯半径和最短航程的要求.仿真结果表明该方法是一种有效的航路规划方法.     

连续短线段空间圆弧转接与插补

针对连续短线段高速加工控制需求,研究了利用空间圆弧转接实现高速插补的方法。建立了圆弧转接数学模型,研究了转接的几何约束和运动约束、转接参数计算、空间圆弧插补等相关理论与算法,并详细分析了算法的使用范围、效率制约因素和计算量等工程实现相关问题。仿真和加工实验表明:该转接算法能显著提高加工效率,减小振动,改善工件表面质量。作为空间圆弧转接算法基础的空间圆弧插补算法对空间任意平面内圆弧插补具有实用价值。本文所有算法已经在自主研发的数控平台上进行了验证,应用效果良好。     

自适应中心变异差分进化算法及其在涡轮叶型优化设计中的应用

为了更好地求解多维复杂函数优化问题,提出了自适应中心变异差分进化算法(SCDE),并以低温火箭发动机多级氧涡轮叶片的高精度气动型面优化设计为例进行了验证.使用商业软件进行三维叶片几何造型和单通道流场分析,计算得到涡轮效率作为优化设计评价指标.最终得到了合理的优化结果,涡轮效率相比初始设计提高了5.25%.