挠性杆的镗加工技术

针对挠性杆的结构特点和加工难点,提出了有效的工艺措施,从装夹定位、刀具材料与几何参数选择、刃磨方法、切削用量的选择,以及挠性杆内应力的分析等方面详细地阐述了加工过程中的关键技术,解决了挠性杆镗削加工的技术难题。     

Asteroid and comet hazard: Identification problem of observed space objects with the parental bodies

This article focuses on the genetic identification of observed small cosmic bodies with alleged parental bodies; namely, comets, asteroids and meteoroid swarms. There is a problem of the upper D-value limit as a measure of proximity between the orbits of the bodies in the five-dimensional phase space (Southworth and Hawkins, 1963). In the study of genetic relationships of the comet and meteor complexes, the D value is usually taken as equal to 0.2 for all meteor showers. However, the upper D limit should be investigated for each meteoroid complex. For example, such investigation was performed for the Taurid meteor complex (Porub?an et al., 2006). In this paper, the upper D-criterion limit value was investigated for the Perseid meteor shower. The 1862 III Swift–Tuttle comet is its parental comet.     

Assessing and minimizing collisions in satellite mega-constellations

We aim to provide satellite operators and researchers with an efficient means for evaluating and mitigating collision risk during the design process of mega-constellations. We first introduce a novel algorithm for conjunction prediction that relies on large-scale numerical simulations and uses a sequence of filters to greatly reduce its computational expense. We then use this brute-force algorithm to establish baselines of endogenous (intra-constellation), or self-induced, conjunction events for the FCC-reported designs of the OneWeb LEO and SpaceX Starlink mega-constellations. We demonstrate how these deterministic results can be used to validate more computationally efficient, stochastic techniques for close-encounter prediction by adopting a new probabilistic approach from Solar-System dynamics as a simple test case. Finally, we show how our methodology can be applied during the design phase of large constellations by investigating Minimum Space Occupancy (MiSO) orbits, a generalization of classical frozen orbits that holistically account for the perturbed-Keplerian dynamics of the Earth-satellite-Moon-Sun system. The results indicate that the adoption of MiSO orbital configurations of the proposed mega-constellations can significantly reduce the risk of endogenous collisions with nearly indistinguishable adjustments to the nominal orbital elements of the constellation satellites.     

复杂通道类零件五轴加工刀轴规划

针对复杂通道类零件的五轴数控加工,提出一种控制刀轴稳定变化的刀轴规划方法。首先,通过对刀轴可行空间的均匀离散,建立一种高效求解刀轴可行空间精细边界的方法;然后,依据刀轴矢量规划准则,求解满足机床角加速度约束的可行刀轴序列集合,并提出一种切削行内旋转坐标线性变化的刀轴矢量规划方法;最后,通过建立刀轴变化和残留高度综合评价指标,得到优化的刀轴矢量,并与典型的商用软件进行了实验对比验证。结果表明,使用本文提出的刀轴规划方法得到的切削行刀位轨迹旋转坐标变化均匀,旋转轴角加速度最大值降低到商用软件的10%以下,残留高度平均值降低了22%,改善了切削过程的稳定性,提高了加工表面质量。     

基于微分进化算法的二自由度PID控制器参数优化

针对二自由度PID控制器参数多、调节困难等问题,提出了一种基于微分进化算法参数调节优化方法。证明了微分进化算法能够收敛到平稳点,并具有概率全局收敛性。研究了二自由度PID控制器参数与抑制特性、跟踪特性的关系,并将微分算法与遗传算法、粒子群算法的参数优化结果进行了比较。仿真验证表明,微分算法能够更好地实现二自由度PID控制器参数的调节,具有优异的跟踪特性和抑制特性。     

钼钛锆高温合金的电火花加工工艺研究

针对钼钛锆这一耐高温材料在航天动力系统中的特殊加工需求,开展了电火花加工钼钛锆合金的工艺特性研究.采用DOE的方法,设计了25-1析因试验对放电参数进行筛选,得到对加工效果有显著影响的3个参数;在此基础上设计了响应曲面试验,探讨了包括脉宽、占空比和峰值电流等放电参数对材料去除率和电极相对损耗率的影响,并且拟合得到了材料去除率和相对电极损耗率的推荐公式和响应曲面图.通过分析试验结果表明:(1)材料去除率受峰值电流变化的影响最明显,并且脉宽与占空比呈现一定的交互关系;(2)电极相对损耗率受峰值电流变化影响不明显,受脉宽和占空比变化影响大,而且两者呈现一定的交互关系.     

小直径深孔加工技术在航空机载行业中的应用

分析总结了国内外小直径深孔加工技术后,介绍了小直径深孔加工技术在航空机载行业中的应用,及其小直径深孔加工时设备选型需注意的问题。     

PREPROCESSING AND POSTPROCESSING SYSTEM FOR FINITE ELEMENT COMPUTATION

研究了有限元计算中的单元自动划分、曲线处理、节点疏密处理、载荷自动分布、与优化设计的衔接和等应力线绘制等方面的技术问题，阐述了有限元平面八节点单元前后置处理软件的设计过程。     

信息化制造技术在航天制造企业的应用

结合企业在实际生产中综合运用CAD/CAM/DNC系统完成曲面工件的加工实例,介绍了CAD/CAM/DNC系统在信息化制造过程中各自起的作用,以及通过综合运用对企业信息化制造和企业制造技术所产生的影响。     

On initial steps of chemical prebiotic evolution: Triggering autocatalytic reaction of oligomerization

Searching for extraterrestrial life attracts more and more attention. However this searching hardly can be effective without sufficiently universal concept of life origin, which incidentally tackles a problem of origin of life on the Earth. A concept of initial stages of life origin is stated in the paper. The concept eliminates key difficulties in the problem of life origin, and allows experimental verification of it. According to the concept the predecessor of living beings has to be sufficiently simple to provide non-zero probability of self-assembling during short (in geological or cosmic scale) time. In addition the predecessor has to be capable of autocatalysis, and further complication (evolution). A possible scenario of initial stage of life origin, which can be realized both on other planets, and inside experimental facility is considered. In the scope of the scenario a theoretical model of multivariate oligomeric autocatalyst is presented. Results of computer simulation of two versions of oligomeric autocatalytic reactions are presented. It is shown that the contribution of monomer activation reaction is essential, and in some cases autocatalysis in polymerizing reaction can be achieved without catalyzing proper monomer binding reaction.