压电阻抗技术用于铝板损伤检测的实验研究

为了实现对金属铝板的损伤检测,从而为航空装备提供高效、可靠的维修检测技术保障。介绍了压电阻抗技术用于结构损伤检测的基本原理,并以含裂纹铝合金圆片为对象开展了实验研究和深入探讨。研究结果表明,高频激励下,可以通过PZT电阻抗实部响应曲线谱的变化来识别结构损伤。同时引入了不同损伤下,PZT电阻抗实部相关系数偏差（1-R2）,以（1-R2）3来定义损伤指数,从而实现了损伤初步定量估计。     

Effect of tube-electrode inner diameter on electrochemical discharge machining of nickel-based superalloy

Nickel-based superalloys are widely employed in modern aircraft engines because of their excellent material characteristics, particularly in the fabrication of film cooling holes. How-ever, the high machining requirement of a large number of film cooling holes can be extremely chal-lenging. The hybrid machining technique of tube electrode high-speed electrochemical discharge drilling (TEHECDD) has been considered as a promising method for the production of film cooling holes. Compared with any single machining process, this hybrid technique requires the removal of more complex machining by-products, including debris produced in the electrical discharge machin-ing process and hydroxide and bubbles generated in the electrochemical machining process. These by-products significantly affect the machining efficiency and surface quality of the machined prod-ucts. In this study, tube electrodes in different inner diameters are designed and fabricated, and the effects of inner diameter on the machining efficiency and surface quality of TEHECDD are inves-tigated. The results show that larger inner diameters could effectively improve the flushing condi-tion and facilitate the removal of machining by-products. Therefore, higher material removal efficiency, surface quality, and electrode wear rate could be achieved by increasing the inner diam-eter of the tube electrode.     

柠檬酸钙酸解过程的建模与计算机控制

通过研究柠檬酸钙酸解过程中溶液电导率的变化规律，建立了酸解体系的数学模型，提出了改革酸解工艺路线中的物料添加顺序，并用计算机自动控制物料添加量和添加速率，自动判定酸解终点的方法。     

Investigation on the Thermal Conductivity of 3-Dimensional and 4-Directional Braided Composites

It is vital to choose a factual and reasonable micro-structural model of braided composites for improving the calculating precision of thermal property of 3-D braided composites by finite element method (FEM). On the basis of new microstructure model of braided composites proposed recently, the model of FEM calculation for thermal conductivity of 3-dimennsional and 4-directional braided composites is set up in this paper. The curves of coefficient of effective thermal conductivity versus fiber volume ratio and interior braiding angle are obtained. Furthermore, comparing the results of FEM with the available experimental data,the reasonability and veracity of calculation are confirmed at the same time.     

火星表面热环境对航天器热控影响分析

火星大气对太阳辐射产生吸收和散射作用,同时还将与火星表面航天器发生对流换热.热设计时难以直接评估对流、辐射和导热三种换热对航天器的影响,从而确定主要的控温途径.在调研火星表面辐射、大气等热环境的基础上,从线性化传热系数和对流辐射比的角度对比分析了辐射、对流和导热对航天器的影响.器表辐射传热系数随光学属性和温度的变化范围...     

高速飞行器轻质防热材料高温环境下的隔热性能研究

导弹等高速飞行器广泛采用轻质材料进行热防护,但实际使用的轻质防热材料由于在密度、质量、工艺、生产批次等多方面的原因,厂家提供的非连续表征的离散式材料导热系数,与非线性连续变化的实际热参数之间存在一定差别.建立轻质防热材料高温导热系数测量装置,通过试验得到轻质高温陶瓷隔热材料导热系数与温度之间的非线性关系,为提高数值计算...     

航空发动机法兰接触热阻特性实验研究

通过搭建法兰接触热阻实验台,在法兰间隙0～0.75 mm、螺栓拧紧力矩20～40 N·m参数范围内,测量不同材料机匣多个轴向位置的壁温来获得通过法兰的热流,得到法兰的接触热阻、单位接触热导。分析了法兰间隙、螺栓拧紧力矩对法兰接触热阻特性的影响。研究结果表明随着法兰间隙的增加,接触热阻呈线性增加,最大增加0.03 K/W,单位接触热导先迅速减小,后趋于平缓,最大降低了10 744.2 W/(K·m2),约94.5%;随着拧紧力矩的增加,接触热阻减小,最大降低了22.1%。     

低频电连接器检测方法研究CSCD

本文主要阐述了低频电连接器外观检测和电性能测试中的接触电阻、绝缘电阻和介质耐电压的检测方法及其注意事项,提出为满足武器系统对低频电连接器耐恶劣环境、高可靠的特殊需求,有效保证武器型号系统中电连接器的质量,必须规范低频电连接器外观及电性能指标检测标准。本文可为从事低频电连接器检测工作的人员提供参考。     

碳纤维热导率与其微观结构参数的关系

碳纤维具有多晶多相特性,为了研究微晶结构特性对热导率的影响,本文通过XRD对碳纤维的微观特征结构参数的表征,对导热性能与微观特征结构的关联性进行了研究。研究结果表明,碳纤维热导率随着石墨微晶的基面宽度（L_a）、堆砌厚度（L_c）和平均堆垛层数（N）的增大而增大,随着孔隙率（V_p）的增大而降低。基于Raman图谱的分峰拟合信息,对碳纤维的石墨化度进行分析。结果显示,碳纤维的石墨化度越大,热导率越高。     

创新一号微小卫星电源分系统

介绍了我国第一颗微小卫星创新一号(CX-1)电源分系统的性能、组成、工作原理,以及太阳电池阵、镉镍电池组和电源控制器等的设计和相应参数。分析了设计中采用的三域控制统一母线调节、高效三结砷化镓太阳电池发电和充电V-T曲线智能化控制管理等关键技术。飞行试验结果表明,CX-1卫星电源分系统的性能优良、工作可靠,达到了设计要求。