多重网格法求解二元跨音速欧拉流

 近年来,采用时间相关欧拉方程或N-S方程求解跨音速流得到了迅速发展。为了获得二元或三元复杂形体正确的表面气动参数和足够高分辨率的流场物理特性,必须采用十分细密的网格,因而导致计算时间成倍增长。为此,除继续发展各种差分格式,探讨各种自适应网格技术外,运用多重网格技术加速收敛过程得到了国外普遍关注并取得了一定的成功。国内也已有采用多重网格法解跨音速欧拉流的文章,然而均局限于两重网格的计算。为探索多重网格法和焓阻尼技术对加速收敛的作用,我们以NACA0012翼型的跨音速流动为例,采用MacCormack两步显式格式进行了数值实验。     

结冰飞机着陆阶段飞行安全包线确定及操纵应对策略

结冰会导致飞行安全包线收缩、严重威胁飞行安全,研究结冰后安全包线变化对于操纵应对策略设计及提高飞行安全具有重要意义。以美国国家航空航天局（NASA）的项目飞机GTM（Generic Transport Model）为研究对象,通过对飞机的气动参数进行多项式拟合,建立了结冰飞机纵向通道的动力学模型。为了得到能随结冰程度变化的安全包线,将可达性分析理论引入到对结冰飞机着陆过程的安全性分析。提出将正向可达集与反向可达集的交集作为飞行安全包线,其中可达集的确定是基于水平集方法求解哈密尔顿-雅克比方程的最优解。最后针对不同程度的结冰条件进行了操纵时域验证,并提出了相应的操纵控制策略。研究结果表明,轻度结冰对安全包线影响较小,整个着陆过程的飞行状态始终能在最优控制指导下保持在安全包线以内;但对于重度结冰,飞行安全包线收缩严重,常规操纵已经很难使飞机达到着陆要求,需要进行飞行状态改出处理。研究结果为指导飞行操纵及实时包线保护打下基础。     

径向磁气组合轴承系统的动态性能

为探究磁轴承失效时能否减轻转子跌落带来的损害,将人字槽径向动压气体轴承引入磁轴承转子系统,研究磁气组合轴承对系统动态性能的影响和动压气体轴承的支承特性。采用有限差分法和小扰动法求解气膜厚度方程和雷诺方程,研究动压气体轴承的静动态特性。对磁轴承电磁力进行了分析,采用磁轴承不完全微分PID（比例-积分-微分）控制策略,对系统进行了理论模态分析和试验模态分析,完成了系统高速旋转试验,测试了动压气体轴承在不同偏心率和转速下的承载力。结果表明,引入动压气体轴承可提高系统的动态性能,在磁轴承失效造成高速转子跌落瞬间,偏心率趋近于1,两个径向动压气体轴承能够产生较大承载力,减轻转子跌落造成的损害。      

基于放大因子与Spalart-Allmaras湍流模型的转捩预测

为了验证放大因子输运方程与Spalart-Allmaras(S-A)湍流模型耦合对转捩现象的模拟精度,选取Schubauer and Klebanoff(S-K)平板、S809低速翼型、30p30n多段翼型以及复杂的三维HiLiftPW-1构型进行自由转捩计算,并将计算结果与实验进行比较分析,其中针对S809算例,还与Langtry-Menter(L-M)转捩模型进行了比较.算例结果表明:放大因子输运方程与S-A湍流模型的耦合能够较好的捕捉转捩位置以及转捩发展过程,对分离泡诱导的转捩的模拟相比L-M转捩模型更精确,转捩位置的捕捉精度提升了10%;对比实验,多段翼转捩位置的捕捉误差最大为6.5%;针对三维高升力增升构型,以实验作为参考,全湍流计算与考虑边界层转捩的对比显示考虑边界层转捩能够更加精确的模拟气动力系数,升力和表面摩擦阻力系数的模拟精度精度提升1%.      

Recent active thermal management technologies for the development of energy-optimized aerospace vehicles in China

Recently, the development of modern vehicles has brought about aggressive integration and miniaturization of on-board electrical and electronic devices. It will lead to exponential growth in both the overall waste heat and heat flux to be dissipated to maintain the devices within a safe temperature range. However, both the total heat sinks aboard and the cooling capacity of currently utilized thermal control strategy are severely limited, which threatens the lifetime of the on-board equipment and even the entire flight system and shrink the vehicle’s flight time and range. Facing these thermal challenges, the USA proposed the program of “INVENT” to maximize utilities of the available heat sinks and enhance the cooling ability of thermal control strategies. Following the efforts done by the USA researchers, scientists in China fought their ways to develop thermal management technologies for Chinese advanced energy-optimized airplanes and spacecraft. This paper elaborates the available on-board heat sinks and aerospace thermal management systems using both active and passive technologies not confined to the technology in China. Subsequently, active thermal management technologies in China including fuel thermal management system, environment control system, non-fuel liquid cooling strategy are reviewed. At last, space thermal control technologies used in Chinese Space Station and Chang’e-3 and to be used in Chang’e-5 are introduced. Key issues to be solved are also identified, which could facilitate the development of aerospace thermal control techniques across the world.     

Challenges and perspectives of transport cargo vehicles utilization for performing research in free flight

Russian Progress transport cargo vehicles have successfully been used in different space station programs since 1978. At present time, they play an important role in the International Space Station (ISS) project. Main tasks performed by the transport cargo vehicle (TCV) in the station program are the following: refueling of the station, delivery of consumables and equipment, waste removal, station attitude control and orbit correction maneuver execution.     

Soybean cultivar selection for Bioregenerative Life Support Systems (BLSSs) – Hydroponic cultivation

Four soybean cultivars (‘Atlantic’, ‘Cresir’, ‘Pr91m10’ and ‘Regir’), selected through a theoretical procedure as suitable for cultivation in BLSS, were evaluated in terms of growth and production. Germination percentage and Mean Germination Time (MGT) were measured. Plants were cultivated in a growth chamber equipped with a recirculating hydroponic system (Nutrient Film Technique). Cultivation was performed under controlled environmental conditions (12 h photoperiod, light intensity 350 μmol m⁻² s⁻¹, temperature regime 26/20 °C light/dark, relative humidity 65–75%). Fertigation was performed with a standard Hoagland solution, modified for soybean specific requirements, and EC and pH were kept at 2.0 dS m⁻¹ and 5.5 respectively.     

叶片全三维反问题优化设计方法

基于数值求解Navier-Stokes方程,对叶轮机械叶片全三维反问题优化设计方法进行研究.反问题给定叶片表面的静压分布反求叶型,假设叶表网格点有虚拟移动速度,迭代过程中根据叶表的实际静压和目标静压之差来修改叶型.对单排叶栅进行了反问题设计,并给出了初步的优化算例,结果能很好地满足目标静压分布,验证了该方法的有效性,计算的时间和精度也适合进行工程应用.      

Ion-acoustic waves in unmagnetized collisionless weakly relativistic plasma of warm-ion and isothermal-electron using time-fractional KdV equation

Collisionless unmagnetized plasma consisting of a mixture of warm ion-fluid and isothermal-electron is considered, assuming that the ion flow velocity has a weak relativistic effect. The reductive perturbation method has been employed to derive the Korteweg–de Vries (KdV) equation for small – but finite-amplitude electrostatic ion-acoustic waves in this plasma. The semi-inverse method and Agrawal’s method lead to the Euler–Lagrange equation that leads to the time fractional KdV equation. The variational-iteration method given by He is used to solve the derived time fractional KdV equation. The calculations show that the fractional order may play the same rule of higher order dissipation in KdV equation to modulate the soliton wave amplitude in the plasma system. The results of the present investigation may be applicable to some plasma environments, such as space-plasmas, laser-plasma interaction, plasma sheet boundary layer of the earth’s magnetosphere, solar atmosphere and interplanetary space.