大跨时空任务背景下的太阳能无人机任务规划技术研究进展

通过任务规划技术合理的优化太阳能无人机的飞行轨迹和动力学参数,能够有效提高太阳能无人机的能量利用率,使其胜任许多大范围跨时间跨空间飞行任务。从能量建模、续航评估和能量管理策略3个方面对大跨时空任务背景下太阳能无人机任务规划技术的研究进展进行了综述。在能量建模方面,介绍了当前主流的太阳辐射模型和能量生产基本框架;在续航评估方面,分析了目前的指标设计和应用方法;在能量管理策略方面,从能量综合应用、风力滑翔机制、轨迹优化方法和面向特定任务的应用4个角度,梳理了当前的研究现状。最后,对该领域未来可能的研究方向进行了展望。     

Longitudinal variation of the equatorial ionosphere: Modeling and experimental results

We describe a new version of the Parameterized Regional Ionospheric Model (PARIM) which has been modified to include the longitudinal dependences. This model has been reconstructed using multidimensional Fourier series. To validate PARIM results, the South America maps of critical frequencies for the E (foE) and F (foF2) regions were compared with the values calculated by Sheffield Plasmasphere-Ionosphere Model (SUPIM) and IRI representations. PARIM presents very good results, the general characteristics of both regions, mainly the presence of the equatorial ionization anomaly, were well reproduced for equinoctial conditions of solar minimum and maximum. The values of foF2 and hmF2 recorded over Jicamarca (12°S; 77°W; dip lat. 1°N; mag. declination 0.3°) and sites of the conjugate point equatorial experiment (COPEX) campaign Boa Vista (2.8°N; 60.7°W; dip lat. 11.4°; mag. declination −13.1°), Cachimbo (9.5°S; 54.8°W; dip lat. −1.8°; mag. declination −15.5°), and Campo Grande (20.4°S; 54.6°W; dip lat. −11.1°; mag. declination −14.0°) have been used in this work. foF2 calculated by PARIM show good agreement with the observations, except during morning over Boa Vista and midnight-morning over Campo Grande. Some discrepancies were also found for the F-region peak height (hmF2) near the geomagnetic equator during times of F₃ layer occurrences. IRI has underestimated both foF2 and hmF2 over equatorial and low latitude sectors during evening-nighttimes, except for Jicamarca where foF2 values were overestimated.     

Conceptual design of a bioregenerative life support system containing crops and silkworms

This article summarizes a conceptual design of a bioregenerative life support system for permanent lunar base or planetary exploration. The system consists of seven compartments – higher plants cultivation, animal rearing, human habitation, water recovery, waste treatment, atmosphere management, and storages. Fifteen kinds of crops, such as wheat, rice, soybean, lettuce, and mulberry, were selected as main life support contributors to provide the crew with air, water, and vegetable food. Silkworms fed by crop leaves were designated to produce partial animal nutrition for the crew. Various physical-chemical and biological methods were combined to reclaim wastewater and solid waste. Condensate collected from atmosphere was recycled into potable water through granular activated carbon adsorption, iodine sterilization, and trace element supplementation. All grey water was also purified though multifiltration and ultraviolet sterilization. Plant residue, human excrement, silkworm feces, etc. were decomposed into inorganic substances which were finally absorbed by higher plants. Some meat, ingredients, as well as nitrogen fertilizer were prestored and resupplied periodically. Meanwhile, the same amount and chemical composition of organic waste was dumped to maintain the steady state of the system. A nutritional balanced diet was developed by means of the linear programming method. It could provide 2721 kcal of energy, 375.5 g of carbohydrate, 99.47 g of protein, and 91.19 g of fat per capita per day. Silkworm powder covered 12.54% of total animal protein intakes. The balance of material flows between compartments was described by the system of stoichiometric equations. Basic life support requirements for crews including oxygen, food, potable and hygiene water summed up to 29.68 kg per capita per day. The coefficient of system material closure reached 99.40%.     

基于纯文本数据文件的APDL与MATLAB的混合建模方法研究

通过对有限元软件ANSYS有限元模型生成方法的介绍和对比,提出基于纯文本数据文件的APDL与MATLAB的混合建模方法,并以建立单齿模型为例,在ANSYS中导人在MATLAB程序生成的数据文件,实现参数化建模。     

战斗机燃油系统流体网络的数值计算

论述了战斗机燃油系统自供能源式流体网络的组成及工作原理，并对流体网络中的关键部件燃油增压泵，液动涡轮泵及射流泵等数学建模，而构成自供能源式流体网络的计算模型。在此基础上，通过分析几种状态下流体网络的工作情况，提出了计算仿真流体网络中流量与压力分布的方法，并对计算结果进行了分析和总结。     

CIV工艺过程中气体传质模型与计算

在建立碳布叠层体心立方模型、碳布叠层立方模型和纤维束叠层模型典型预制体的宏观孔隙结构几何模型和气体传质数学模型的基础上 ,研究了CVI(chemicalvaporinfiltration)工艺过程中孔隙网络结构对气体比渗透率和材料致密度的影响。结果表明 :孔隙网络的结构与形状是决定反应气体在孔隙中的比渗透率和部件最终致密度的主要因素之一。     

运输机总体参数和性能统计分析

 按照飞机设计的基本原理,通过对现有运输机总体参数和性能数据的统计分析,寻找现代运输机各个总体性能和性能参数之间存在的定量关系,得到了 1 6个经验公式和一些参数取值范围,为运输机概念设计提供了一些可用的数据。     

机动目标三维空间导引运动建模及导引律研究

给出了导弹—目标追逃运动的空间矢量方程，在此基础上推导了三维导引运动模型。对机动目标应用李雅普诺夫稳定性分析方法提出了一种自适应变结构制导算法。六自由度数学仿真结果表明了模型的正确性和制导算法的有效性。     

压气机转子的表面造型及等温精密成形工艺

采用NURBS方法生成了转子叶片的表面模型，并对其进行了延伸和裁剪，将叶片模型和转子的二次表面模型组合，得到转子锻件和模具镶块的表面模型。以此为基础设计了一套组合式模具，模具的凹模由23块镶块组合而成。最后采用等温锻造的方法成形转子锻件，模具和坯料的加热温度均为430℃。经检测，转子锻件的尺寸精度及组织性能均符合设计要求。     

内外函混合加力燃烧室扩压器内液雾湍流两相流场和浓度场数值模拟

 本文用κ-ε湍流模型和液雾轨道模型,对二维内外函混合加力燃烧室扩压器内有蒸发的液雾两相流动和混合进行了数值预报。其中对气相速度场和温度场的计算结果与实验符合令人满意,液雾两相流的计算结果在趋势上也是合理的,表明本文的模拟方法可用于加力燃烧室性能估算及优化设计。