声表面渡(SAW)力传感器

本文对声表面波(SAW)力传感器的基本工作原理进行了理论分析,同时对该传感器进行了实验研究。实验获得了约2.3kHz/9.8×10~(-3)N 的力灵敏度。实验表明该传感器是一个线性传感器,对于微力测量十分敏感。     

风洞实验应变天平元件优化设计

应用最优化理论对风洞实验应变天平元件结构尺寸优化设计的基本思想作了论述,提出了天平元件多变量优化设计新方法。该设计方法能够保证天平元件的灵敏度与刚度的匹配取得理想值,同时,克服了传统设计方法计算量大的缺点。对于初次从事天平元件设计的人员来说,只要对天平的工作原理和元件变形形式有所掌握,运用该设计方法即可用较快的速度获得最佳结构尺寸。一个实用的天平元件优化设计算法及实例对人们将有所带助。     

Cutting force model and damage formation mechanism in milling of 70wt% Si/Al composite

High-mass fraction silicon aluminium composite(Si/Al composite) has unique properties of high specific strength, low thermal expansion coefficient, excellent wear resistance and weldability. It has attracted many applications in terms of radar communication, aerospace and automobile industry. However, rapid tool wear resulted from high cutting force and hard abrasion, and damaged machined surfaces are the main problem in machining Si/Al composite. This work aims to reveal the mechanisms of milli...     

在线测量技术在精密磨床中的应用

通过为数控精密磨床装配雷尼绍测头,详细介绍了在线测量在数字控精密磨床系统的构成、工作原理、数据处理方法以及磨削实验结果,使其具备在线测量功能,实现了产品的测量、加工一体化。     

自适应端齿研磨机的设计与工艺研究

为提高端齿盘研磨精度和研磨效率,从分析端齿盘加工需求出发,改进现有研磨工艺,介绍了一种自适应找正的专用高精度、高效率端齿研磨机床的总体设计方案及其关键零部件,并通过试验验证研磨加工的端齿盘分度精度达到0.5″,能够满足端齿盘研磨加工的要求。     

卫星太阳能帆板的撞击问题

本文研究卫星帆板展开过程中的撞击问题，用子结构方法和单向递推组集方法行到经铰坐标和柔性体模态坐标为系统广义坐标的撞击阶段柔性多体系统的动力学方程，由与撞击有关约束方程的Ｌａｇｒａｎｇｅ乘子导出撞击力的计算公式，计算了卫星帆板在撞击过程中撞击力的最大值和卫星姿态角速度的变化规律。计算结果表明，对柔性体之间的碰撞，卫星姿态角速度在变化过程中呈现上下波动的趋势。     

一种用于导弹姿态控制系统的直接力非线性控制法

为改善传统导弹姿控系统线性控制法的不足,用相平面法分析了直接力作用下导弹的姿态运动规律和气动力作用对直接力控制的影响,提出了一种综合控制精度、姿控发动机产品特性和推进剂消耗量等指标的直接力非线性控制方法,给出了控制模型。仿真结果表明,该法能在气动力作用或干扰无法忽略的条件下实现导弹姿控发动机的开关工作正常,保证精度及推进剂消耗最省,其控制精度与线性比例微分(PD)控制律相当。     

TiAlN 涂层钻头钻削钛合金的实验研究

采用Ti Al N涂层硬质合金麻花钻对钛合金(TC4)进行钻削试验,研究了切削用量对轴向力、加工孔壁表面粗糙度和切屑形态的影响。结果表明:轴向力随着进给量的增加而增加,轴向力随着转速的增加而减小。运用指数公式模型对轴向力实验结果进行回归分析,得到轴向力与转速以及进给量之间的关系式,并对该方程进行了检验验证误差均小于7%;随着进给量的增加断屑能力逐渐增加,切屑长度逐渐变短。在低转速和进给量为50 mm/min时切屑形态为短螺旋形切屑,此时排屑和孔壁粗糙度均为最佳。     

Surface shape control of integrated paraboloid space reflector consisting of sub-reflectors exploiting modulated solar pressure

Reflectors are very critical space elements and can be used not only as solar collectors/reflectors, telecommunication radio antennas and telescopes but also for dual-usage such as solar sails and solar concentrators to probe and sublimate materials from asteroids when actively controlling the surface shape. In this paper, the surface shape of a slack reflector with negligible elastic deformations will be controlled to be a paraboloid by actively modulating the solar radiation pressure (SRP) force using reflectivity control devices (RCDs) across the reflector. Nonlinear static equilibrium equations for an arbitrary infinitesimal within the reflector along the radial, circumferential and transverse directions are established considering the external modulated SRP force and internal tensions respectively. The coupled radial stress differential governing equation and reflectivity algebraic equation are obtained for the paraboloid reflector by the help of the formulation of an inverse problem based on equilibrium equations previously established. Some analytical and numerical analysis for reflectors with ideal and non-perfect SRP force models are performed respectively. The conclusions concerning about how to control the reflector’s surface shape successfully using allowed reflectivity, resulting in reasonable stress range, moreover, how to get the feasible solutions influenced by the reflector’s size parameters, are all based on the presented analytical and numerical analysis.     

Development of a coupled supersonic inlet-fan Navier–Stokes simulation method

A coupled supersonic inlet-fan Navier–Stokes simulation method was developed by using COMSOL-CFD code. The flow turning, pressure rise and loss effects across blade rows of the fan and the inlet-fan interactions were taken into account as source terms of the governing equations without a blade geometry by a body force model. In this model, viscous effects in blade passages can also be calculated directly, which include the exchange of momentum between fluids and detailed viscous flow close to walls. NASA Rotor 37 compressor test rig was used to validate the ability of the body force model to estimate the real performance of blade rows. Calculated pressure ratio characteristics and the distribution of the total pressure, total temperature, and swirl angle in the span direction agreed well with experimental and numerical data. It is shown that the body force model is a promising approach for predicting the flow field of the turbomachinery. Then, coupled axisymmetric mixed compression supersonic inlet-fan simulations were conducted at Mach number 2.8 operating conditions. The analysis includes coupled steady-state performance, and effects of the fan on the inlet. The results indicate that the coupled simulation method is capable of simulating behavior of the supersonic inlet-fan system.