Transient simulation of regression rate on thrust regulation process in hybrid rocket motor

The main goal of this paper is to study the characteristics of regression rate of solid grain during thrust regulation process. For this purpose, an unsteady numerical model of regression rate is established. Gas–solid coupling is considered between the solid grain surface and combustion gas.Dynamic mesh is used to simulate the regression process of the solid fuel surface. Based on this model, numerical simulations on a H2O2/HTPB(hydroxyl-terminated polybutadiene) hybrid motor have been performed in the flow control process. The simulation results show that under the step change of the oxidizer mass flow rate condition, the regression rate cannot reach a stable value instantly because the flow field requires a short time period to adjust. The regression rate increases with the linear gain of oxidizer mass flow rate, and has a higher slope than the relative inlet function of oxidizer flow rate. A shorter regulation time can cause a higher regression rate during regulation process. The results also show that transient calculation can better simulate the instantaneous regression rate in the operation process.     

Envelope protection for aircraft encountering upset condition based on dynamic envelope enlargement

Upset condition encountered by an aircraft in flight could pose great threat to flight safety, which is of chief importance in civil aviation. The causal factors have the nonlinear and multiple characteristics, and as a result the conventional envelope protection system cannot successfully do with the condition. So dynamic envelope based on differential manifold theory, which can take more coupling factors into account, is proposed as a basis to design a novel envelope protection system. Then the relationship between the dynamic envelope and the control coefficient or pilot command is obtained, and the result shows that the dynamic envelope can be enlarged with the change of control coefficient. Furthermore, quantification of flight security is realized via defining relative distance between flight state and dynamic envelope, which can detect whether there is a risk for an aircraft in flight. Finally, an envelope protection system based on dynamic envelope enlargement is proposed on the basis. NASA’s Generic Transport Model encountering hazard gust wind in climbing phase is taken as an example to verify the system’s feasibility. The result shows that the system can give a better operation encountering upset condition and to a certain extent reduce the number of accidents or incidents.     

Coupling behavior between adhesive and abrasive wear mechanism of aero-hydraulic spool valves

Leakage due to wear is one of the main failure modes of aero-hydraulic spool valves. This paper established a practical coupling wear model for aero-hydraulic spool valves based on dynamic system modelling theory. Firstly, the experiment for wear mechanism verification proved that adhesive wear and abrasive wear did coexist during the working process of spool valves. Sec-ondly coupling behavior of each wear mechanism was characterized by analyzing actual time-variation of model parameters during wear evolution process. Meanwhile, Archard model and three-body abrasive wear model were utilized for adhesive wear and abrasive wear, respectively. Furthermore, their coupling wear model was established by calculating the actual wear volume. Finally, from the result of formal test, all the required parameters for our model were obtained. The relative error between model prediction and data of pre-test was also presented to verify the accuracy of model, which demonstrated that our model was useful for providing accurate prediction of spool valve’s wear life.     

针对不同目标时对接机构适应性研究

讨论了对接过程的动力学模型、与不同质量飞行器对接过程的特点，以纵向性能为例，提出了缓冲性能参数与对接初始条件组合设计，使对接机构能够适应不同对接飞行器质量特性的要求。仿真结果表明，该方法是可行的。     

摩擦焊设备振动油缸的性能分析

液压式摩擦焊设备是将电液伺服控制技术运用到摩擦焊接领域的一种先进设备。通过分析系统振动油缸的频率,找出影响频率的关键因素,深入分析这些因素对振动油缸伺服控制系统的影响,并利用AMESim仿真软件对该系统进行建模分析,验证了分析结果,并总结出改进系统的几点措施,为摩擦焊设备的设计改进提供了理论依据。。     

非线性动力响应分析的双θ法

本文在二次加速度插值模式的基础上,提出了动力响应分析的双θ法及加权平均法。这两个方法,加速度的截断误差(精度)是O(△t~(3)),是无条件稳定的,有较好的人工阻尼性质,没有超越现象。比现有的逐步积分法有明显的优点。     

一种新型综合性靶场安全系统及其检验测试结果

本文首先简要介绍战略导弹发射场和航天发射场靶场安全系统的作用、特点、主要技术要求,接着介绍按美国空军航天司令部要求,由空军研究所开发的基于GPS弹道测量技术,外测、遥测、遥控综合为一体的机动型靶场安全系统——BMRST的构成及其经多种检验测试的结果。     

工艺模型驱动的物料动态精准配送技术

针对飞机装配车间传统“领料式”物料配送存在的弊端,提出了一种工艺模型驱动的物料动态精准配送方法,构建了飞机装配车间物料精准配送管理系统,阐述了系统构建涉及的关键技术难点,采用基于模型的三维可视化消耗式BOM重构方式,建立与设计了模型动态同步精准的MBOM工艺模型,利用RFID技术的优点实时获取物料信息,通过iGPS系统引导AGV物料运输平台来实现装配站位物料的高精度配送。     

Sliding mode control design for oblique wing aircraft in wing skewing process

When the wing of Oblique Wing Aircraft (OWA) is skewed, the center of gravity, inertia and aerodynamic characteristics of the aircraft all significantly change, causing an undesirable flight dynamic response, affecting the flying qualities, and even endangering the flight safety. In this study, the dynamic response of an OWA in the wing skewing process is simulated, showing that the three-axis movements of the OWA are highly coupled and present nonlinear characteristics during the wing skewing. As the roll control efficiency of the aileron decreases due to the shortened control arm in an oblique configuration, the all-moving horizontal tail is used for additional roll and the control allocation is performed based on minimum control energy. Given the properties of pitch-roll-yaw coupling and control input and state coupling, and the difficulty of establishing an accurate aerodynamic model in the wing skewing process due to unsteady aerodynamic force, a multi-loop sliding mode controller is formulated by the time-scale separation method. The closed-loop simulation results show that the asymmetric aerodynamics can be balanced and that the velocity and altitude of the aircraft maintain stable, which means that a smooth transition is obtained during the OWA’s wing skewing.     

Stall flutter prediction based on multi-layer GRU neural network

The modeling of dynamic stall aerodynamics is essential to stall flutter, due to the flow separation in a large-amplitude pitching oscillation process. A newly neural network based Reduced Order Model (ROM) framework for predicting the aerodynamic forces of an airfoil undergoing large-amplitude pitching oscillation at various velocities is presented in this work. First, the dynamic stall aerodynamics is calculated by solving RANS equations and the transitional SST-γ model. Afterwards, the stall flutter bifurcation behavior is calculated by the above CFD solver coupled with structural dynamic equation. The critical flutter speed and limit-cycle oscillation amplitudes are consistent with those obtained by experiments. A newly multi-layer Gated Recurrent Unit (GRU) neural network based ROM is constructed to accelerate the calculation of aerodynamic forces. The training and validation process are carried out upon the unsteady aerodynamic data obtained by the proposed CFD method. The well-trained ROM is then coupled with the structure equation at a specific velocity, the Limit-Cycle Oscillation (LCO) of stall flutter under this flow condition is predicted precisely and more quickly. In order to predict both the critical flutter velocity and LCO amplitudes after bifurcation at different velocities, a new ROM with GRU neural network considering the variation of flow velocities is developed. The stall flutter results predicted by ROM agree well with the CFD ones at different velocities. Finally, a brief sensitivity analysis of two structural parameters of ROM is carried out. It infers the potential of the presented modeling method to depict the nonlinearity of dynamic stall and stall flutter phenomenon.