含有不平衡飞轮的卫星精确动力学模型研究

针对含不平衡飞轮的卫星动力学模型,给出了不平衡飞轮的转动惯量矩阵。用多刚体建模方法,建立了综合的完整姿态动力学分析模型,提出了质心位置的计算方法。通过飞轮系统的完整精确模型,将飞轮扰动对三轴姿态稳定卫星的影响反映至滚转一俯仰一偏航三轴姿态。Matlab／Simulink环境中仿真验证了该系统角动量为常值。分析了不平衡飞轮对卫星姿态的影响,并解释了模型的应用。研究表明飞轮扰动影响不可忽略,精确的动力学模型对未来航天器的应用有重要意义。     

基于遗传算法的地磁匹配搜索策略

为降低导航成本,提出仅利用磁测计和里程计的地磁场匹配定位方法.为解决搜索空间过大的问题,提出以遗传算法在匹配区域搜索可能路径的方法.该方法以相关性度量作为适应度函数,交叉与变异仅针对点列的相对关系完成,提出用局部适应度函数自适应调整交叉概率与变异概率.仿真结果表明,该方法可以有效完成地磁匹配导航中任意形状路径的匹配.     

变形飞行器建模及控制方法研究综述

针对变形飞行器的发展现状、气动建模、动力学建模以及控制方法研究进行了综述。首先阐述了变形飞行器的定义及变形需求,再从四个方面梳理了变形飞行器的技术优势。针对不同的机翼变形方式,对飞行器各种变形技术的特点及发展现状进行了详细的分析与总结;将变形飞行器与固定外形飞行器的气动机理进行了对比分析,并对变形飞行器的动力学建模方法进行了梳理,总结了各种方法的特点;结合变形飞行器自身特性分析了飞行控制的特点及难点,并详细阐述了各类变形飞行器的控制研究进展。最后总结分析了变形飞行器的发展趋势：深化基础理论与技术研究,从材料、结构及控制等领域全方面朝着智能化方向发展,最终实现变形飞行器的工程化、自主化、智能化应用。     

一种星-箭连接动态界面力的深度学习反演方法

针对于星-箭连接动态界面力无法通过力传感器直接测量,且典型时域动载反演方法难以准确计算界面力的时域变化等难点,提出了基于长短时记忆(LSTM)神经网络的星-箭界面力深度学习反演方法。首先通过卫星地面测试试验得到数据依据,以卫星主体结构的加速度测量数据为输入层,以星-箭界面力测量数据为输出层,利用LSTM神经网络建立输入和输出间的反演映射关系模型,实现卫星在发射过程中较高精度的界面力反演。进而,设计并开展了某典型卫星结构的正弦扫频和随机振动实验,测试LSTM界面力反演方法的可行性。结果分析可知,所提出的基于LSTM深度学习反演方法能够精确地获得动态界面力时程数据,两项性能指标均优于目前典型的载荷反演方法。     

Gray bootstrap method for estimating frequency-varying random vibration signals with small samples

During environment testing, the estimation of random vibration signals （RVS） is an important technique for the airborne platform safety and reliability. However, the available meth- ods including extreme value envelope method （EVEM）, statistical tolerances method （STM） and improved statistical tolerance method （ISTM） require large samples and typical probability distri- bution. Moreover, the frequency-varying characteristic of RVS is usually not taken into account. Gray bootstrap method （GBM） is proposed to solve the problem of estimating frequency-varying RVS with small samples. Firstly, the estimated indexes are obtained including the estimated inter- val, the estimated uncertainty, the estimated value, the estimated error and estimated reliability. In addition, GBM is applied to estimating the single flight testing of certain aircraft. At last, in order to evaluate the estimated performance, GBM is compared with bootstrap method （BM） and gray method （GM） in testing analysis. The result shows that GBM has superiority for estimating dynamic signals with small samples and estimated reliability is proved to be 100% at the given confidence level.     

Transient simulation of regression rate on thrust regulation process in hybrid rocket motor

The main goal of this paper is to study the characteristics of regression rate of solid grain during thrust regulation process. For this purpose, an unsteady numerical model of regression rate is established. Gas–solid coupling is considered between the solid grain surface and combustion gas.Dynamic mesh is used to simulate the regression process of the solid fuel surface. Based on this model, numerical simulations on a H2O2/HTPB(hydroxyl-terminated polybutadiene) hybrid motor have been performed in the flow control process. The simulation results show that under the step change of the oxidizer mass flow rate condition, the regression rate cannot reach a stable value instantly because the flow field requires a short time period to adjust. The regression rate increases with the linear gain of oxidizer mass flow rate, and has a higher slope than the relative inlet function of oxidizer flow rate. A shorter regulation time can cause a higher regression rate during regulation process. The results also show that transient calculation can better simulate the instantaneous regression rate in the operation process.     

空间站维修性系统设计与验证方法研究

空间站在轨运行时间长,因此需采用维修性设计和在轨维修的方法实现长寿命高可靠在轨运行。根据维修性设计理论,结合工程实际,提出了基于产品特性分析的维修需求分析方法和维修支持下的可靠度计算方法。明确了系统维修性设计应包括布局、供电、信息、故障检测、维修工作模式等设计内容。并根据维修难度,提出了四级维修策略。最后根据在轨维修特点,提出了地面试验验证和仿真验证的方法。为空间站系统维修性设计提供了一个技术途径。     

Envelope protection for aircraft encountering upset condition based on dynamic envelope enlargement

Upset condition encountered by an aircraft in flight could pose great threat to flight safety, which is of chief importance in civil aviation. The causal factors have the nonlinear and multiple characteristics, and as a result the conventional envelope protection system cannot successfully do with the condition. So dynamic envelope based on differential manifold theory, which can take more coupling factors into account, is proposed as a basis to design a novel envelope protection system. Then the relationship between the dynamic envelope and the control coefficient or pilot command is obtained, and the result shows that the dynamic envelope can be enlarged with the change of control coefficient. Furthermore, quantification of flight security is realized via defining relative distance between flight state and dynamic envelope, which can detect whether there is a risk for an aircraft in flight. Finally, an envelope protection system based on dynamic envelope enlargement is proposed on the basis. NASA’s Generic Transport Model encountering hazard gust wind in climbing phase is taken as an example to verify the system’s feasibility. The result shows that the system can give a better operation encountering upset condition and to a certain extent reduce the number of accidents or incidents.     

Coupling behavior between adhesive and abrasive wear mechanism of aero-hydraulic spool valves

Leakage due to wear is one of the main failure modes of aero-hydraulic spool valves. This paper established a practical coupling wear model for aero-hydraulic spool valves based on dynamic system modelling theory. Firstly, the experiment for wear mechanism verification proved that adhesive wear and abrasive wear did coexist during the working process of spool valves. Sec-ondly coupling behavior of each wear mechanism was characterized by analyzing actual time-variation of model parameters during wear evolution process. Meanwhile, Archard model and three-body abrasive wear model were utilized for adhesive wear and abrasive wear, respectively. Furthermore, their coupling wear model was established by calculating the actual wear volume. Finally, from the result of formal test, all the required parameters for our model were obtained. The relative error between model prediction and data of pre-test was also presented to verify the accuracy of model, which demonstrated that our model was useful for providing accurate prediction of spool valve’s wear life.     

地方高校日语专业学生实践能力培养策略研究

寻求何种途径培养具有较强实践能力的应用型人才，成为各个高校FI语教学研究和改革的重点。文章分析了学生日语实践能力培养体系构建的原则，提出了地方高校日语学生实践能力的培养策略，即重视具有较强的双师型日语实践教学教育团队的培养．构建以能力培养为主线的日语实践教学内容体系，建立多元化的日语实践能力评价机制以及整合校内实践资源并积极稳妥开拓校外日语实践基地等。