基于强跟踪EKF的组合导航系统故障检测方法

针对大方位失准角的机载SINS/GPS组合导航系统,为保证在高动态环境下实现高精度、高可靠的导航,利用强跟踪EKF滤波残差设计了一种基于残差统计特性的坏值检测算法,对导航信息进行估计和跟踪.仿真结果表明,该算法能够实时检测出GPS量测信息中的坏值信息,隔离后可显著提高组合导航精度,具有较高的可靠性、出色的容错能力和重要的工程应用价值.     

航空复合材料智能敲击检测方法研究

复合材料在生产和制造过程中难免会存在缺陷和损伤,严重影响着航空安全。敲击检测是最简单、运用最广泛的无损检测方法,然而其向智能化方向发展过程中出现了诸多问题。对复合材料结构特性、缺陷和损伤、安全性、敲击检测原理、敲击锤设计、信号处理单元、数据库搭建和智能检测算法进行了深入研究,提出了敲击检测标准流程和规范、数据库搭建方法、以及智能聚类检测算法,在此基础上开发了智能敲击检测系统。     

综合模块化航电系统FC网络的机内测试设计

针对综合模块化航电系统FC网络单元分布范围广、故障定位困难、维修效率低的问题,设计了一种机内自测试方法.在网络构建时间和通信效率的约束条件下,通过网络构建和故障检测同步进行的机制实现快速的任务前故障检测,通过实时监测和故障触发相结合实现低开销的任务中故障检测.在网络故障发生后,通过网络遍历和通信自环绕测试将故障有效地隔离至单个模块,提高检测和维修的效率.     

带反馈控制的基本带翼外形的耦合气动/运动数值模拟研究

介绍了一种先进的、时间精度的多学科数值模拟平台的开发和应用,该平台可用于预测飞行器机动过程中的非定常气动特性和飞行力学特性.通过耦合求解非定常Navier-Stokes方程、刚体动力学方程及控制律,对基本带翼外形进行了虚拟飞行数值模拟研究.求解器采用基于结构网格的有限体积法,时间方法采用双时间步方法.使用反馈控制器获得舵偏控制指令,重叠网格方法用来模拟物体间的相对运动.模拟结果显示控制器的增益必须正确选择才能获得正确的响应.仿真结果表明本文发展的虚拟飞行数值模拟方法能够预测包含动边界的复杂非定常流动,具有较强的工程适用性.     

基于RBF带学习能力高精度非线性FDD设计

在轨航天器故障检测与诊断问题需要面对模型的非线性,而且要求尽量提高其检测的精度,为此设计了基于径向基函数（RBF）神经网络的动量轮非线性故障检测与诊断（FDD）方案。首先应用RBF补偿建模误差,提高检测精度,并选择李雅普诺夫函数证明其收敛性;然后应用非线性观测器来产生故障残差,给出了阈值以及故障检测的时间;应用RBF网络对故障信号进行重构,并据此设计了带学习能力的FDD策略。再次建立了详细的动量轮模型,通过不同条件下的仿真研究分别验证残差的阈值特性、时间特性以及RBF的重构能力,仿真结果表明了算法的有效性。     

Digital signal processing and numerical analysis for radar in geophysical applications

Numerical solutions for signal processing are described in this work as a contribution to study of echo detection methods for ionospheric sounder design. The ionospheric sounder is a high frequency radar for geophysical applications. The main detection approach has been done by implementing the spread-spectrum techniques using coding methods to improve the radar’s range resolution by transmitting low power. Digital signal processing has been performed and the numerical methods were checked. An algorithm was proposed and its computational complexity was calculated.     

Systematic examination of the geomagnetic storm sudden commencement using multi resolution analysis

Geomagnetic storm sudden commencements (SSC) contain a wealth of information which is useful in many applications. It is important to point out that the SSCs used in this study are sampled at the rate of one sample per second in order get use of such high resolution data. In this paper, two studies are made on the geomagnetic SSC and an SSC onset automatic detection algorithm is introduced. The first study is about finding the relationship between the SSC rise time and its amplitude. Where it is found that there is a positive correlation between the amplitude and the amplitude gradient which is the amplitude divided by rise time. The second study is checking the spectrum of the SSC, starting from its onset until the end of the SSC rise time. This check had proved that the SSC contains both low and high frequency regions. This led us to introduce a new term, namely the SSC variation rate (VR). This VR is defined as the maximum rate of change of the field in the higher-frequency region of the SSC. These two studies were the guide to build an SSC automatic detector of one sample per second data using multi resolution analysis (MRA) of the discrete wavelet transform (DWT). The data set contains 134 SSCs with different VRs that were collected from the Circum-pan Pacific Magnetometer Network (CPMN). It is found that the standard deviation of the detection error is 41 s and that the average error is 9 s. From the calculated error distribution function, it is found that the detection error is within the range of −1.5 to 3 min. The detection process, as will be shown in the article, takes 70 s for one station and 3 min if the decision is related to the detection(s) of other stations. These results demonstrate the superiority of the proposed algorithm over other algorithms in which the detection error ranges between −8 and 5 min and the detection process takes 2–10 min. In addition to being faster and more accurate than the other algorithms, the proposed algorithm is the first algorithm that automatically detects the SSC onset times from high-resolution data unlike previous studies that focused on determining the SSC times automatically using one-minute resolution data.     

基于实时观测数据的大气密度模式修正

针对国际大气密度模式NRLMSISE-00, 以中国神舟飞船探测数据为基础, 提出一种基于实时大气密度观测数据的模式修正方法. 通过计算分析模式计算结果与探测数据的误差分布特征, 针对地磁相对平静期(Ap≤ 30)模式计算的误差特点, 建立了一种平均误差修正方法, 即认为在相对平静期, 在相同纬度和地方时, 模式误差基本相同, 某一时刻模式预测误差可以近似用与其相同纬度和地方时的平均误差来替代, 从而对模式预测结果进行修正. 以神舟4号探测数据为基础, 通过对模式预测结果采用两种方式进行修正, 可以看到模式误差得到了一定的改善. 采用误差库累积准实时修正, 修正后的误差由原来的20 %降至6 %; 采用误差库5天滑动预报修正后, 模式提前1, 2, 3天的预测误差由原来的20 %分别降至7.8 %, 9.4 %和10.5%.      

基于动态RCS的无人机航迹实时规划

传统的无人机航迹规划主要采用仅考虑无人机与雷达距离的简化雷达威胁模型,未充分考虑无人机雷达散射截面RCS(Radar Cross-Section)随自身姿态角改变而产生的动态变化.据此,提出了无人机周向动态RCS模型,并建立了综合考虑无人机动态RCS与雷达距离的探测概率模型,利用遗传算法进行了基于动态RCS的航迹实时规划,计算结果与传统航迹规划结果进行了对比.仿真结果表明该模型的可行性和有效性,能充分利用无人机自身的优势规避威胁,满足无人机的航迹实时规划的要求.      

基于四路信号处理的载波锁相环

载波跟踪环是独立导航接收机中最为脆弱的部分,在一定载噪比下,影响载波跟踪环跟踪门限的主要因素是动态应力。科斯塔斯锁相环是最常用的载波跟踪环之一,由于频率牵引范围的限制,其对动态应力非常敏感,该频率牵引范围由最大相位牵引范围决定。传统科斯塔斯锁相环是基于两路信号处理进行载波相位锁定的,其相位牵入范围仅为［-π/2,π/2］。文章提出了一种基于四路信号处理的科斯塔斯锁相环,增加的两路信号分别与原来两路相位相差π/4,其相位牵入范围可以达到［-3π/4,3π/4］,较传统方式提高了1/2。仿真结果显示文中提出的设计方法能够明显提高环路的动态性能