A broad climatology of very high latitude substorms

Magnetic data from a newly commissioned Indian Antarctic station Bharati (corrected geomagnetic (CGM) coordinates 74.7°S, 97.2°E) and closely-spaced IMAGE chain observatories (∼100° magnetic meridian in Northern hemisphere) has been analyzed to study the climatology of substorms which were localized poleward of the standard auroral oval. We considered four austral summers (year 2007–2010) when data from Bharati was available. Several very high latitude substorms were observed in this duration when the solar activity remained unexpectedly low for a long time. Various features of very high latitude substorms, e.g., local time dependence, interplanetary state, hemispherical asymmetry and their nightside low latitude signatures are examined. Events studied here, suggested the following properties of substorms occurring at very high latitudes: (1) maximum occurrence was observed near magnetic midnight (21:00–02:00 MLT). (2) In contradiction to earlier reports, many substorms were observed even during negative IMF Bz condition. In addition, majority of substorms occurred during low or moderate solar wind streams. (3) Magnetic signatures were often pronounced in the winter hemisphere. (4) Even if widely used standard AE indices fail to monitor very high latitude substorms, their low latitude signatures are often evident.     

50吨级氢氧火箭发动机的设计与研制

系统性地回顾了长征五号运载火箭芯一级50t级氢氧火箭发动机YF-77的设计与研制历程。通过分析氢氧发动机的特点以及国内外氢氧发动机的发展现状,阐述了国内新一代运载火箭研发的技术路线和50t级氢氧火箭发动机的研制背景;对50t级氢氧火箭发动机的总体技术方案及其特点进行了分析与总结,并在此基础上对发动机主要组件的技术方案及其特点开展分析;对发动机热试车情况、可靠性验证情况和故障排除情况进行了分析;对50t级氢氧火箭发动机的研制情况、技术特点进行了总结,并对国内氢氧发动机和液氧/甲烷发动机的发展进行了展望。     

新型低密度Nb-Ti合金抗氧化涂层制备及组织性能分析

针对新型低密度Nb-Ti合金抗氧化性能需求,开展了Si-Cr-Ti系抗氧化涂层研究,重点分析了所制备涂层抗氧化性能和微观组织在氧化前后的变化。结果表明,1 200℃下涂层寿命大于10 h,涂层抗热震性能良好;涂层与基体之间形成一层扩散层,保证了涂层的结合强度;在高温大气环境下,涂层表面生成一种隔绝氧气填补涂层表面空隙的玻璃质SiO_2层,因而具有良好的抗氧化性能。     

基于IRI-2012模型广州地区f_0F_2实测与预测的对比分析

利用广州台站(23.2°N,113.3°E)的实测数据和IRI-2012模型提供的预测数据,对比分析了2013年广州地区f_0F2的变化特征.结果表明,IRI-2012模型能够较好预测该地区f_0F_2的变化趋势,并且CCIR参数得到的预测值比URSI参数更接近实测值;预测值与实测值存在系统偏差,在11:00 LT-06:00 LT时段,观测值均比预测值大,其他时段则相反.在日落后至午夜前时段,预测值与实测值有较大差距.绝对偏差的极值点通常出现在20:00 LT左右,最大超过4 MHz.相对偏差变化比较明显的时段是午夜后至凌晨;在02:00 LT或04:00 LT及06:00 LT附近,可能会出现双误差峰值点,最大超过0.4;但在σ变化很大的20:00 LT附近,相对偏差却变化不大.夜间增强现象会使得偏差增大,导致预测值不能很好反映实测f_0F2的变化.     

S7-300液位控制系统下位机的实现

利用以太网,结合西门子现场总线搭建了过程控制平台,完成了对温度、压力、流量和液位这些典型过程参数的采集、存储和分析,并利用PID算法通过对变频器、电控阀门的控制,实现恒压供水任务,进而完成对于水箱液位稳定的控制.     

锆元素在铝合金中的应用

概述了锆元素在铝合金中的存在形式,重点讨论其对铝合金各项性能的作用机理,包括对合金的再结晶行为,淬火敏感性,时效行为以及合金综合性能(强度、断裂韧性、抗应力腐蚀性能等)的影响变化。简要介绍了锆元素在铝合金,尤其在高强铝合金中的典型应用,并结合当前锆元素研究发展的新趋势,指出对锆元素的研究认识需进一步深入和突破。     

Al2O3/hBN自润滑复合材料的制备及显微结构分析

以Al2O3为陶瓷基体,hBN为固润滑组元添加剂,在N2保护下烧成,制得了Al2O3/hBN自润滑复合陶瓷,通过SEM、EDS、XRD等分析探讨了固润滑组元的引入量、添加助熔剂及常压和热压两种烧成条件下材料显微结构的变化。结果表明,hBN引入量为10%时已有足够的量均匀分散在基体中;相同烧成温度下,热压过程中施加的压力可以破坏hBN的卡片房式结构,伴随液相的出现有利于hBN的定向排列,获得了结构致密的自润滑复合陶瓷材料。     

高强Al-Cu-Li-X铝锂合金2A97三级时效工艺及性能研究

以新型高强Al-Gu-Li-X铝锂合金2A97为研究对象,通过拉伸试验研究两种三级时效工艺及其改型工艺对合金性能的影响.结果表明,含有δ′相二次析出过程的三级时效和含有δ′相回溶过程的三级时效处理合金的强度和塑性达到T6峰值时效水平,三级时效改型工艺由于增加变形使前者合金的强度升高,塑性降低,使后者的强度显著提高.三级时效和单级时效合金的主要显微组织有δ′相、θ″/θ′相和T1相.三级时效改型工艺由于增加变形促进δ′相析出和δ′相回溶,同时变形促进T1相析出,从而改变了主要强化相δ′相和T1相的数量.     

无加力涡扇发动机二元喷管的红外辐射特性实验

对轴对称喷管和一组长宽比分别为1,4,8,12和16的二元喷管进行了红外辐射特性测试实验研究。喷管中的气流由主流燃气和次流空气组成,用以模拟涡扇发动机的喷管。得出了二元喷管的红外辐射强度的空间分布,并且将二元喷管和轴对称喷管的红外辐射强度进行了比较。      

Electrolytic Passivation of Nitinol Shape Memory Alloy in Different Electrolytes

The corrosion behavior of the nitinol alloy was studied in various corrosion media of different Cl–ion concentrations. The results demonstrate that the Cl–ion concentration has significant influences on the corrosion behavior of the nitinol alloy. In order to enhance the corrosion resistance, protective films were generated on the surface of the nitinol alloy by means of the electrochemical passivation method, for which five different electrolytic solutions were investigated. The surface analysis indicates full growth of all samples pas-sivated in the different electrolytic solutions with layers, however, showing different morphological features. Without any defects like micro-cracks and pores, the surface of the samples passivated in the molybdate solution turns out smoother and denser than those pas-sivated in other solutions. It is shown that the electro-chemical passivation will reduce Ni content but increase Ti content in the surface, reaching the Mole ratio of Ti:Ni=9.01:1 on the outermost surface. Potentiodynamic polarization test demonstrates that the samples electrochemically passivated in the molybdate solution present a significant increase in breakdown potential due to titanium enrichment on the outermost surface.