ISAR欺骗干扰效果评估方法研究

逆合成孔径雷达（ISAR）能够获取运动目标的一维像和二维像,利用宽带特征识别出真实空间目标.宽带成像欺骗干扰是对抗ISAR雷达目标识别的有效措施.构建了基于目标结构特征的ISAR欺骗干扰效果评估体系,提出了相应的干扰效果评估准则,研究了ISAR欺骗干扰效果评估方法.利用仿真评估软件进行仿真分析,验证了评估方法的合理性.     

机载超短波干扰装备战术性能评估方法研究

分析机载超短波干扰装备在现代作战中的作战对象和任务使命,从侦察能力、测向能力、干扰能力和系统稳定性四个方面构建衡量超短波干扰装备战术性能的指标体系,提出运用模糊综合法分析其综合性能的方法,并通过实例验证了评估方法的可行性.     

次流通道对双喉道气动矢量喷管的性能影响研究

为了进一步了解次流通道对双喉道气动矢量喷管(Dual Throat Nozzle,DTN)气动矢量性能的影响,基于二维DTN喷管构型进行了详细的数值模拟研究。结果表明:收扩的次流通道相对于平直的次流通道不会改善DTN喷管的推力矢量性能;随着次流流量增加,DTN的推力矢量角存在一个最大值,超过该值各推力矢量性能均会降低;次流通道宽度对DTN喷管推力矢量性能影响显著:(1)次流宽度不影响所能达到的最大推力矢量角;(2)小的次流宽度在进口总压较高的条件下具有更高的推力矢量角;(3)增大次流宽度能降低次流总压,但达到的矢量角会有所减小。     

Parametric analyses for synthetic jet control on separation and stall over rotor airfoil

Numerical simulations are performed to investigate the effects of synthetic jet control on separation and stall over rotor airfoils. The preconditioned and unsteady Reynolds-averaged Navier–Stokes equations coupled with a k x shear stream transport turbulence model are employed to accomplish the flowfield simulation of rotor airfoils under jet control. Additionally,a velocity boundary condition modeled by a sinusoidal function is developed to fulfill the perturbation effect of periodic jets. The validity of the present CFD procedure is evaluated by the simulated results of an isolated synthetic jet and the jet control case for airfoil NACA0015. Then, parametric analyses are conducted specifically for an OA213 rotor airfoil to investigate the effects of jet parameters(forcing frequency, jet location and momentum coefficient, jet direction, and distribution of jet arrays) on the control effect of the aerodynamic characteristics of a rotor airfoil. Preliminary results indicate that the efficiency of jet control can be improved with specific frequencies(the best lift-drag ratio at F+= 2.0) and jet angles(40 or 75) when the jets are located near the separation point of the rotor airfoil. Furthermore, as a result of a suitable combination of jet arrays, the lift coefficient of the airfoil can be improved by nearly 100%, and the corresponding drag coefficient decreased by26.5% in comparison with the single point control case.     

Antenna pattern control of planar arrays for long distance communications

As an alternative to standard antennas and due to the advent of low-cost digital processors and materials, adaptive antenna arrays are increasingly considered for applications in long distance communications. The pattern beam control potentialities provide the performance improvement of the communication systems. In this context, this work presents a technique that permits to synthesize the antenna pattern of a planar array. Considering that the relationship between the array factor and the array excitations for the far field region is a Fourier transform in the appropriate variables, the non-uniform sampling procedure is extended for planar arrays. These arrays permit a further control of the antenna pattern since two dimensions of space are used. The technique considers a number of array factor points equal to the array size, which is used to impose appropriated values in the antenna pattern. The produced array factor passes through those points with the desired values, which allows the synthesis of antenna patterns with appropriated characteristics. The theory is presented in order to develop the necessary direct expressions to calculate the array excitation. The array factor can be obtained using the inverse Fourier transform. As application examples, with this technique it is possible to define the level of each sidelobe of the antenna pattern, to control the main beam and to impose nulls in prescribed directions of the pattern.     

基于杂波对消-自聚焦的多通道SAR-GMTI

对超高频(UHF)波段多通道合成孔径雷达(SAR)动目标检测技术进行研究,解决了长相干积累时间导致动目标在方位向散焦严重的问题。采用分块自聚焦技术对多通道SAR地面移动目标指示(GMTI)系统自适应杂波抑制后的SAR图像进行处理,改善杂波抑制后的SAR图像中动目标的聚焦情况,增强动目标与周围剩余杂波的对比度,进而提高恒虚警率(CFAR)检测的性能。与传统杂波抑制后直接进行CFAR检测方法相比较,该方法降低了检测虚警概率。实测数据处理结果显示动目标的信杂比明显提高,动目标方位向聚焦成功,证明了该方法的有效性。     

PR状态方程在超临界喷射模型中的应用

针对超临界流体物性的特殊性,对超临界喷射数值模拟方法进行研究。基于PR状态方程建立了考虑超临界流体特点的超临界喷射数值模型,并采用该模型对超临界C10H22喷射到超临界N2环境中的喷射进行了数值模拟。对比研究了采用PR状态方程的真实气体模型和理想气体模型得出的密度、温度、质量分数分布以及超临界喷射长度和喷射扩张角的变化规律和差异性,并与试验数据进行了对比。结果表明:2种模型在物性预测上的差异会造成以上喷射特性模拟结果的巨大差异,理想气体模型模拟结果与试验数据误差很大,利用真实气体模型能够得到与试验数据较为吻合的结果。基于PR状态方程的超临界喷射数值模型准确可靠,可为碳氢燃料的超临界喷射现象提供参考。     

雷达信息显示中扫描线抑制问题分析

根据在混合显示方式下原始视频和综合信息显示的特点，分析了在综合信息显示时间不足的情况下，增大其显示时间的方法，如何保证固定的刷新频率，及自适应扫描线抑制方法中相应控制信号的产生过程，还分析了减少扫描线对原始视频信息显示的影响。     

Electrochemical micromachining of micro-dimple arrays on cylindrical inner surfaces using a dry-film photoresist

The application of surface textures has been employed to improve the tribological performance of various mechanical components. Various techniques have been used for the application of surface textures such as micro-dimple arrays, but the fabrication of such arrays on cylindrical inner surfaces remains a challenge. In this study, a dry-film photoresist is used as a mask during through-mask electrochemical micromachining to successfully prepare micro-dimple arrays with dimples 94 lm in diameter and 22.7 lm deep on cylindrical inner surfaces, with a machining time of 9 s and an applied voltage of 8 V. The versatility of this method is demonstrated, as are its potential low cost and high efficiency. It is also shown that for a fixed dimple depth, a smaller dimple diameter can be obtained using a combination of lower current density and longer machining time in a passivating sodium nitrate electrolyte.     

水下超声速过膨胀燃气射流的流场特性

为研究水下超声速过膨胀燃气射流的流场特性,在压力水筒中开展了大扩张比锥形喷管的固体火箭发动机水下点火实验,并基于雷诺时均Navier-Stokes（RANS）方法和流体体积（VOF）模型进行数值求解,分析了过膨胀燃气射流与水介质的相互作用过程。研究表明：超声速过膨胀燃气建立射流通道后,射流核心区长度随喷管落压比的减少而减少;射流核心区剧烈振荡,表现为高频的膨胀和收缩,振荡频率随喷管落压比的减小而增加,范围为100~200 Hz;射流边界不断振荡,并伴随波系结构变化,当过膨胀程度较大时,激波进入喷管使其发生流动分离现象,流动分离点周期性往复移动;分离区内压力脉动没有显著的特征频率,主要集中在100~600 Hz的宽频带,锥形喷管水下流动分离的简易判据为喷管出口压力不低于环境背压的0.44倍。