一种抑制控制力矩陀螺框架电机共模电压的方法

控制力矩陀螺作为执行机构,是保障航天器在轨寿命和工作性能的核心部件之一。为了抑制控制力矩陀螺外框电机的共模电压,提高控制力矩陀螺的在轨寿命,本文提出了一种三相四桥臂的拓扑结构与优化的SVPWM调制算法结合的共模电压抑制方法,调制过程中避免零矢量的使用,使驱动器可以保持在平衡状态,经过仿真试验的结果对比分析,验证了这种方法可以有效的抑制系统的共模电压。     

Microstructure and Martensitic Transformation Behaviors of Explosively Welded NiTi/NiTi Laminates

The study is a first attempt to prepare bulk NiTi/NiTi shape memory alloy (SMA) laminates with a macroscopic heterogeneous composition by explosive welding and investigate their microstructures and martensitic transformation behaviors. After explosive weld- ing, a perfect interfacial bonding between the two components and a reversible martensitic transformation are realized in the tandem. Results show achievement of a fine granular structure and the maximum value of microhardness near the welding interface because of the excessive cold plastic deformation and the high impact velocity during the explosive welding. Meanwhile, the effects of aging on the transformation of the welded tandem are investigated by differential scanning calorimeter (DSC) and subject to discussion. The trans- formation temperatures of NiTi/NiTi SMAs increase with the rise of the aging temperature. The experimental results indicate the shape memory properties of NiTi/NiTi SMA fabricated by explosive welding can be improved by optimizing the aging technology.     

基于磁路法与等效热网络法的航天 永磁同步电机设计与仿真

针对航天永磁同步电机方案初步设计耗时长、过度依赖商业软件的问题,基于磁路法和热网络法,提出了一套方案设计阶段航天永磁同步电机磁热性能快速预估与仿真方法。给出了定子内径、定子外径、铁芯长度、匝数等关键参数的取值准则,建立了包含36个节点集总参数热网络模型,并以端部绕组为例给出了热平衡方程的详细推导过程。通过与成熟商业软件对比,其电磁计算最大误差出现在电流有效值上,偏差值为607%;与样机实测值对比,绕组温升最大误差为73%,满足方案设计阶段预示精度要求,为方案设计阶段航天永磁同步电机快速性能预估提供有力支撑。     

装配间隙对顶盖环缝搅拌摩擦焊焊接质量的影响

结合超声波相控阵、金相观察、力学试验分析技术,研究了由于铣切角度不同产生的装配间隙对顶盖环缝搅拌摩擦焊焊缝质量及力学性能的影响。结果显示当铣切角差异带来的装配间隙大于1.30 mm时,焊缝中存在孔洞型体积缺陷,装配间隙越大,缺陷越严重;装配间隙的存在会使得焊缝的致密程度降低,焊缝的延伸率下降,并且在装配间隙大于1.30 mm时,焊缝的抗拉强度会发生大幅度地下降。     

铝合金燃油-液体热交换器制造技术

分析了燃油———液体热交换器的结构特点及翅片成形和芯体焊接难点,重点介绍了翅片成形和芯体盐浴钎焊工艺方法及获得的技术经济效果。     

平移速度的变化对搅拌焊接材料流动的影响

基于有限元方法对不同搅拌头平移速度下搅拌摩擦焊接过程中焊接构件Al6061-T6材料的三维流动问题进行分析,研究了搅拌头平移速度的变化对等效塑性应变的分布和材料流动的影响。结果表明,搅拌头前方的材料向上涌起,被旋推到搅拌头后方并开始向下运动,这一过程是促使搅拌摩擦焊接顺利完成的主要原因。材料的等效塑性应变等值线与不同焊接区域的边界具有较好的对应关系。随着搅拌头平移速度的增加,垂直于焊缝方向上的截面上,等效塑性应变减小,但是材料的流动速度会随之增加。较低的搅拌头平移速度有利于焊缝中心线两侧材料的融合。     

Semi-analytic Solution of Steady Temperature Fields During Thin Plate Welding

Usually, it is very difficult to find out an analytical solution to thermal conduction problems during high temperature welding. Therefore, as an important numerical approach, the method of lines （MOLs） is introduced to solve the temperature field characterized by high gradients. The basic idea of the method is to semi-discretize the governing equation of the problem into a system of ordinary differential equations （ODEs） defined on discrete lines by means of the finite difference method, by which the thermal boundary condition with high gradients are directly embodied in formulation. Thus the temperature field can be obtained by solving the ODEs. As a numerical example, the variation of an axisymmetrical temperature field along the plate thickness can be obtained.     

"双证书"制度是我国高职教育发展的必由之路

“双证书”制度即职业资格和学历证书并重制度,该制度既是经济社会发展对高技能型专门人才的一种客观要求,也是高等职业教育为适应经济社会发展而进行的一种自我完善,同时高等职业教育的办学层次定位-培养目标-办学特色等方面也决定了“双证书”制度是高等职业教育健康发展的基本策略和必由之路。     

同步发电机动态特性仿真方法研究

介绍了同步发电机基于电路模型的动态仿真方法,指出了应用它在分析同步发电机动态特性时具有的优点。     

多层钎焊结构件超声C扫描信号特征分析

对多层钎焊件内层焊缝检测中产生的多重声束路径叠加现象进行了详细分析,并用计算机模拟超声检测中的叠加信号,总结出对等厚薄板钎焊缝阵结构内层焊缝的检测方法及C扫描时信号门放置的合理位置,并且在实际检测中验证了该方法的正确性.