毫秒脉冲星计时的多星观测

在评价脉冲星时研究发展趋势的基础上 ,讨论了基于毫秒脉冲星自转的脉冲星时间的短期特征和长期稳定度。并对影响其稳定度的因素作了初步分析。 5 0m射电望远镜计时观测的目的之一就是综合脉冲星时研究。对于 5 0m望远镜计时观测的选星和由多星观测进行综合脉冲星时研究中的数据分析问题进行了讨论。     

基于DSP+CPLD的射频源控制

采用数字信号处理器(DSP)和可编程逻辑器件(CPLD)技术，设计了射频信号源控制电路板。介绍了控制部分硬件和软件的组成，并给出了所设计软件的主程序。用线性调频和脉冲两种信号进行了仿真实验。结果表明，所设计的射频源的输出符合要求，控制灵活。     

Ionosphere modelling for Galileo single frequency users: Illustration of the combination of the NeQuick model and GNSS data ingestion

The ionospheric effect remains one of the main factors limiting the accuracy of Global Navigation Satellite Systems (GNSS) including Galileo. For single frequency users, this contribution to the error budget will be mitigated by an algorithm based on the NeQuick global ionospheric model. This quick-run empirical model provides flexible solutions for combining ionospheric information obtained from various sources, from GNSS to ionosondes and topside sounders. Hence it constitutes an interesting simulation tool not only serving Galileo needs for mitigation of the ionospheric effect but also widening the use of new data.     

测量船通信网络自检测方法

针对测量船通信网络由2层帧方式交换升级为3层包交换方式后无法使用上星自环检测方式实现自检测的问题,在分析通信网络自检测模式下的链路特性的基础上,提出基于组播报文实现自检测的构想。设计利用组播洪泛特性实现报文环回的网络拓扑结构以及实现检测与对比报文的硬件设备,阐述检测软件发送、接收、处理报文的流程,实现了网络通断、时延及丢包率的自检测,并通过模拟检测实验证明了设计方案是切实可行的。     

某型直升机旋翼转速表的数字化设计方案

提出某型直升机数字旋翼转速表的研制方案,给出以频率/数字(F/D)变换电路为核心的主要硬件原理,分析了采样误差的产生及抑制误差的措施.装机部件研制成功证实了方案的可行性.     

不锈钢、钛合金导管高频钎焊工艺方法的改进

高频钎焊焊接方法在国内外进行研究的院校和公司相对较少，是一项较新的钎焊方法。国外在此项焊接工艺的研究和应用走在世界的前列。国内一直处于不断摸索和改进的过程中，焊接过程始终存在一些问题。通过本课题技术研究和相关的试验，详细地介绍了高频钎焊设备、工艺方法和高频钎焊工艺参数确定等方面的应用。     

Relative position and attitude estimation of spacecrafts based on dual quaternion for rendezvous and docking

The capacity to acquire the relative position and attitude information between the chaser and the target satellites in real time is one of the necessary prerequisites for the successful implementation of autonomous rendezvous and docking. This paper addresses a vision based relative position and attitude estimation algorithm for the final phase of spacecraft rendezvous and docking. By assuming that the images of feature points on the target satellite lie within the convex regions, the estimation of the relative position and attitude is converted into solving a convex optimization problem in which the dual quaternion method is employed to represent the rotational and translational transformation between the chaser body frame and the target body frame. Due to the point-to-region correspondence instead of the point-to-point correspondence is used, the proposed estimation algorithm shows good performance in robustness which is verified through computer simulations.     

简单实用的步进电机驱动电源

本文介绍了利用ＥＰＲＯＭ芯片构成步进电机的驱动电源，并对驱动电源及频率混同电路进行了分析和设计。     

Influence of ionospheric perturbations in GPS time and frequency transfer

The stability of GPS time and frequency transfer is limited by the fact that GPS signals travel through the ionosphere. In high precision geodetic time transfer (i.e. based on precise modeling of code and carrier phase GPS data), the so-called ionosphere-free combination of the code and carrier phase measurements made on the two frequencies is used to remove the first-order ionospheric effect. In this paper, we investigate the impact of residual second- and third-order ionospheric effects on geodetic time transfer solutions i.e. remote atomic clock comparisons based on GPS measurements, using the ATOMIUM software developed at the Royal Observatory of Belgium (ROB). The impact of third-order ionospheric effects was shown to be negligible, while for second-order effects, the tests performed on different time links and at different epochs show a small impact of the order of some picoseconds, on a quiet day, and up to more than 10 picoseconds in case of high ionospheric activity. The geomagnetic storm of the 30th October 2003 is used to illustrate how space weather products are relevant to understand perturbations in geodetic time and frequency transfer.     

Relationship Between Corrosion Level of Steel Bar and Diameter of Corroded Sensing Steel Wire in Wireless Sensor

A kind of wireless sensor was previously developed,which is powered and transmit signals wirelessly instead of using an electrical connection to the embedded reinforcement.Based on this technique,the relationship between diameters of corroded sensing steel wires and corrosion levels of steel bars is established by experiments.Quadratic function is utilized to fit the experiment results,and the correlation coefficients are all larger than 0.95.Estimated corrosion levels of commonly used steel bars are given for different diameters of corroded sensing steel wires fractured due to corrosion.