基于双边截断的双参数海上风电站 SAR图像 CFAR检测

文章提出了 1种基于双边截断的双参数海上风电站 SAR图像 CFAR检测器 DTCS-TPCFAR,目的是提高在具有多个目标海上区域和石油泄漏区域等环境下对海上风电站的检测性能。DTCS-TPCFAR所提出的双边截断杂波的方法,能够同时消除高强度和低强度异常值的干扰,同时保留真实的杂波样本。通过使用最大似然估计计算双边截断后样本的均值和标准差,然后通过这 2个参数估计值计算出截断阈值,最后再结合指定的虚警率(Probability of False Alarm,PFA)来对测试单元(Test Cell,TC)进行判断,完成最终的目标检测。这也是首次将 CFAR检测器用于检测海上风电站。文章通过 Sentinel-1数据集来验证该方法的有效性。实验结果表明,文章所提出的算法在相同指定虚警率下,具有更高的检测率(Detection Rate,DR)和更低的误报率(False Alarm Rate,FAR)。     

Ti-15-3超塑性研究

Ti-15V-3Cr-3Sn-3Al合金是一种在航空航天工业领域具有广泛应用前景的亚稳定β型钛合金。本文用恒应变速率法进行实验,测试Ti-15-3板材的超塑性,为超塑成形提供参考依据。     

以静态燃速预示固体发动机燃速

对同一工艺条件下大量的药条燃速、φ127 mm发动机燃速和全尺寸发动机燃速进行了测试和研究,对不同截面尺寸的药条燃速测试结果和精度进行了比较。结果表明,当选择合理的药条截面尺寸时,药条燃速与全尺寸发动机燃速间具有满意的相关性,可对全尺寸发动机燃速进行预示。研究结果可用于固体发动机工程实际。     

纳米NdCoO3对小球粘接高燃速推进剂燃烧性能的影响

采用盐助溶液燃烧法制备了平均粒径为10 nm、分散性良好的钙钛矿型纳米NdCoO3。用DSC考察了不同质量分数的纳米NdCoO3对AP和双基粘接剂热分解的影响,研究了纳米NdCoO3对小球粘接高燃速推进剂燃烧的催化作用。结果表明,随纳米NdCoO3催化剂质量分数的增加,催化效率先增大后减小,在质量分数为3%时催化效率最佳,此时AP高温分解峰温大幅降低,双基粘接剂的分解峰温也得到降低,二者的表观分解热增大。同时,对应的小球粘接高燃速推进剂燃速较高,压强指数较低。     

变换域通信系统及其关键技术

变换域通信系统通过信道估计在变换域设计信号波形避开干扰,它没有采用载波调制,而是用一个类似噪声的基函数进行信息调制。论述了变换域通信系统的基本概念,对变换域通信系统的关键技术——环境干扰估计与检测、基函数序列与波形设计、调制解调与高速率数据传输进行了分析,最后指出了其应用前景。     

阳极层霍尔推力器的阳极分段形式对内磁极刻蚀速率的影响

由于推力器内径向电势和等离子体的分布会影响轰击推力器器壁离子的运动,本文通过阳极的不同分段形式来改变推力器内电势分布,进而研究推力器阳极的不同分段形式对内磁极的刻蚀速率分布。首先利用PIC方法研究入射离子的数量和能量分布,接着对内磁极内表面和上表面的刻蚀速率进行仿真计算。由结果可知：入射到内磁极两个面上的离子数量和能量,都是在三分段阳极时达到最大值,其他三种情况偏低。对于内磁极内表面和上表面的刻蚀速率也是在三分段阳极时最大,其次是单阳极,而二、四分段阳极时的刻蚀速率最小。最后通过单阳极和二分段阳极时刻蚀速率的试验结果对比,验证了此研究结果的正确性,为下一步提高推力器的寿命研究提供了参考数据和研究方法。     

Improved specular point prediction precision using gradient descent algorithm

Global Navigation Satellite Systems Reflectometry (GNSS-R) utilizes GNSS signals reflected off the Earth surface for remote sensing applications. Due to weak power of reflected signals, GNSS-R receiver needs to track reflected signals by open loop. The first step is to calculate the position of specular point. The specular point position error of the existing algorithm—Quasi-Spherical Earth (QSE) Approach—is about 3 km which may cause troubles in data post-processing. In this paper, gradient descent algorithm is applied to calculate position of specular point and the calculation is based on World Geodetic System 1984 (WGS 84) ellipsoid in geodetic coordinate. The benefit of this coordinate is that it is easy to investigate the effect of real surface’s altitude. Learning rate—the key parameter of the algorithm—is adaptively adjusted according to initial error, latitude and gradient descent rate. With self-adaptive learning rate strategy, the algorithm converges fast. Through simulation and test on Global Navigation Satellite System Occultation Sounder II (GNOS II), the performances of the algorithm are validated. The specular point position error of the proposed algorithm is about 10 m. The speed of the proposed algorithm is competitive compared with the existing algorithm. The test on GNOS II shows that the proposed algorithm has good real-time performance.     

Integrated supersonic wind tunnel nozzle

In supersonic wind tunnels, the airflow at the exit of a convergent-divergent nozzle is affected by the connection between the nozzle and test section, because the connection is a source of disturbance for supersonic flow and the source of disturbance generated by this disturbance propagates downstream. In order to avoid the disturbance, the test can only be carried out in the rhombus area. However, for the supersonic nozzle, the rhombus region is small, limiting the size and attitude angle of the test model. An integrated supersonic nozzle is a nozzle and a test section as a whole, which is designed to weaken or eliminate the disturbance. The inviscid contour of the supersonic nozzle is based on the method of characteristics. A new curve is formed by the smooth connection between the inviscid contour and test section, and the boundary layer is corrected for the overall curve. Integrated supersonic nozzles with Mach number 1.5 and 2 are designed, which are based on this method. The flow field is validated by numerical and experimental results. The results of the study highlight the importance of the connection about the nozzle outlet and test section. They clearly show that the wave system does not exist at the exit of the supersonic nozzle, and the flow field is uniform throughout the test section.     

相控阵雷达长时跟踪波束调度与波形优化策略

针对相控阵雷达多目标跟踪波束调度和波形参数优化控制的问题，本文提出了一种基于马尔可夫决策过程（MDP）的相控阵雷达跟踪波束调度与波形参数优化策略，该方法以无迹卡尔曼滤波（UKF）算法为基础来估计目标的状态。首先将本文的序列决策问题建模为马尔可夫决策过程，定义了资源的效费比和长期回报率，然后与当前实际跟踪误差综合考虑作为MDP的回报函数，进而给出了调度的优化模型，最后将长时决策问题转化为动态规划算法结构进行求解，并且提出了一种并行混合遗传粒子群优化算法来求解各决策时刻的最优策略。仿真结果表明了长时策略的先进性以及寻优算法的优越性，与传统的短时策略相比，跟踪精度可提高11.17%。     

Dynamic modeling and multi-stage integrated control method of ultra-quiet spacecraft

Space telescope ultrahigh precision pointing control requires the spacecraft platform to provide an ultra-quiet working environment. Vibration isolator rejection control and the multi-stage integrated control method is believed to be one of the best methods to improve the space telescope attitude control performance. In this paper, the fine dynamics model of multi-stage spacecraft systems is presented and the multi-stage integrated controller design techniques are provided. Effectiveness of the multi-stage integrated control approach is demonstrated by both the numerical simulation and experiment results. An integrated design and demonstrated experimental environment is developed for high-fidelity control performance assessment. The verification experiments for the space telescope attitude control and vibration control are carried out. The results show that the pointing accuracy and stability of the line-of-sight (LOS) for space telescope are improved at least one order by the multi-stage integrated control method.