用于PSK载波提取的改进型逆调制环的研究

文章介绍了一种在全数字接收机中可用软件方式实现的MPSK载波提取方法———改进型逆调制环,并给出了性能分析。该方法适用于高速且速率可变的PSK调制技术,能较好地消除悬搁现象,适合于用DSP或FPGA来实现。     

基于DSP的航空发动机分布式控制

在航空发动机分布式控制系统的研究过程中,为保证系统的可靠性,对通讯总线的实时性和确定性提出了更高的要求。在现有航空发动机分布式控制系统CAN总线的研究成果基础上,提出将时间触发TTCAN总线应用于发动机分布式控制通讯总线的设想。针对航空发动机分布式控制系统平台讨论了TTCAN总线可行的通讯方案,给出TTCAN网络节点详细软件和硬件设计,并建立了通信试验平台。试验结果表明:TTCAN总线对于航空发动机分布式控制系统而言具有良好应用前景。     

Coordinated adaptive beamformer over distributed antenna network

The spatial diversity of distributed network demands the individual filter to accommodate the topology of interference environment. In this paper, a type of distributed adaptive beamformer is proposed to mitigate interference over coordinated antenna arrays network. The proposed approach is formulated as generalized sidelobe canceller (GSC) structure to facilitate the convex combination of neighboring nodes’ weights, and then it is solved by unconstrained least mean square (LMS) algorithm due to simplicity. Numerical results show that the robustness and convergence rate of antenna arrays network can be significantly improved in strong interference scenario. And they also clearly illustrate that mixing vector is optimized adaptively and adjusted according to the spatial diversity of the distributed nodes which are placed in different power of received signals to interference ratio (SIR) environments.     

A novel system parameters design and performance analysis method for Distributed Satellite-borne SAR system

As a promising new technology emerged in recent years, the Distributed Satellite-borne SAR (DSS) system with Interferometric Synthetic Aperture Radar (InSAR) imaging capability has been recognized by the remote sensing community as an integrated part of the spaceborne earth observation system. However, most researches on DSS were focused on individual aspects of system design/analysis and data processing, while few studies have been dedicated to establishing a standard methodological framework for universal DSS system design. Aiming at this problem, the topics of DSS system error analysis and design method are investigated in this paper. Firstly, a rigorous error propagation model of height measurement is theoretically derived from the DSS InSAR imaging geometry, and the impact of each error sources in this model on the height measurement accuracy is analyzed individually. In particular, the baseline length and its measurement error in the InSAR imaging plane are identified as the dominant factors. Second, a new method for DSS system design is proposed based on our analyses with the error propagation model. This method consists of two important phases, namely collaboration design and monostatic design. The major objective of collaboration design is to determine the configuration and parameters for the coordination between satellites in the DSS system. Afterwards, the key parameters for single satellite and the payload are determined by the monostatic design. Thirdly, a system performance analysis method is developed to comprehensively evaluate the performance of the pre-designed DSS system. In the next section, a typical example of DSS system design is given to demonstrate the effectiveness of the proposed system design and analysis methods. The target DSS system has the same goal and hardware configuration as the TanDEM-X mission. Finally, the conclusion is drawn with our major findings are presented.     

面向深空通信的分布式系统Raptor码传输机制

为缓解深空探测器与地面站之间的超远距离和星体遮挡,而导致巨大的信号衰减以及链路频繁中断的问题,基于容迟/容断网络（DTN）协议框架,利用轨道器进行多跳中继组网传输,设计了多个探测器经过轨道器向地面传输场景下的分布式系统Raptor编码传输方案（DSRC）。提出了联合译码简化方案,理论分析推导了DSRC方案及改进方案的性能参数,并与现有分布式无速率纠删方案进行仿真比较,在译码冗余为5%时达到了0.01的译码失败率。     

一种用于符号同步MF—TDMA系统的定时偏差估计算法

文章给出了一种用于符号同步MF—TDMA系统的定时偏差估计算法。该算法利用一种特殊的辅助序列成型后所表现出来的正弦特性,从中提取出精确的定时偏差,算法工作在每符号1个采样点下。理论和仿真结果表明,该算法实现简单,估计精度高,在相同条件下,其性能优于常用的数字平方滤波法,并且该算法对载波相位偏差不敏感,对载波频偏的敏感度比较低。     

一种群路突发信号连续解调位同步算法

窄带群路的突发信号解调的过程中,可以采用的位同步算法有很多种,这里介绍的群路突发信号连续解调位同步算法,是一种基于开环同步的位同步算法,解决了持续时间较长的突发帧信号的位同步问题。     

基于光纤双环网的高精度时频同步技术研究

本文介绍了一种基于光纤双环网的时频同步技术设计方法,针对时频设备协同使用时如何获得高精度同步指标这一问题提出了一种设计思路。以系统时间源使用北斗/GPS/GLONASS,本系统同步精度优于5E-13,频率稳定度优于5E-13@1d;以UTC(BIRMM)输出的TOD+1PPS做系统时间源,本系统同步精度优于4E-13,频率稳定度优于6E-14@1d。本方案提出的方法原理简单,系统可根据使用情况进行裁剪,相比卫星双向等手段成本低廉,适合在时频同步领域推广。     

基于面元法的分布式涵道推进系统进气道优化设计

分布式涵道推进系统被认为是一种高效率的动力布局形式,其中进气道如何使气流低损失地快速过渡到数个圆形截面的涵道风扇进口是一个亟需探索的设计问题。以分布式涵道推进系统进气道过渡段为研究对象,基于面元计算方法,发展了一种进气道内流动的快速数值预测手段。应用所发展面元法数值方法结合进气道的超椭圆参数化方法、自适应优化算法建立了分布式涵道推进系统进气道的无经验优化设计方法。以某型悬停状态的分布式涵道推进垂直起降飞行器为例,使用该设计方法实现了从无圆滑过渡的简单初始几何到气动指标符合优化预期的光顺几何的优化设计。基于RANS的三维数值分析表明：所优化设计的进气道相比于初始几何总压畸变系数(DC)从0.0086降低到0.0067,低于基于经验设计的参考几何（DC=0.0073）,且流场无明显分离及旋涡,确认了这种具有高时间效率的无经验设计方法的有效性。     

非光滑多体系统最大Lyapunov指数的计算方法

结合非光滑力学与非线性动力学的理论给出非光滑多体系统最大Lyapunov指数的数值计算方法.应用第一类Lagrange方法建立具有单边约束非光滑多体系统变拓扑结构动力学方程;应用线性互补理论与方法检测非光滑事件;应用混沌同步方法计算Lyapunov指数.在提高计算速度方面,提出了采用二分搜索法加快搜索速度以及采用调制参数方法加快系统达到同步状态的速度.通过算例说明本文算法的可行性与有效性.