分布式InSAR卫星绕飞角设计与控制方法研究

针对分布式卫星绕飞轨道构型设计与控制问题,提出了基于Hill方程的绕飞构型设计算法,给出了绕飞角与升交点赤经偏差和轨道倾角偏差的关系,并分析了绕飞角的稳定性;根据分布式InSAR卫星绕飞构型特点提出了基于开普勒轨道实现特定绕飞角和绕飞半长轴的双层迭代轨道控制算法。仿真结果表明,上述方法设计的绕飞构型稳定,捕获控制策略简单可行、控制精度高,具有一定的工程参考价值。     

对地观测DSS任务分配问题的CSP模型与算法

任务分配是对地观测分布式卫星系统(Distributed Satellites System, DSS)自主协作运行过程中的一个重要环节. 针对任务分配中的约束满足问题(Constraint Satisfaction Problem, CSP), 以DSS完成任务总耗能最少为原则, 构建了任务分配问题的CSP模型, 并引入MAS理论中的合同网协议, 给出模型的求解算法, 通过仿真算例对模型和算法进行了验证.      

Aerodynamic design of tractor propeller for high-performance distributed electric propulsion aircraft

Aiming to maximize the aerodynamic performance of the Distributed Electric Propulsion (DEP) aircraft, a hybrid design framework which focuses on the aerodynamic performance of the propeller/wing integration has been developed and validated numerically. Variable-fidelity modelling for propeller aerodynamics has been used to achieve computational efficiency with reasonable accuracy. By optimizing the aerodynamic loading distributions on the tractor propeller disk, the induced slipstream is redistributed into a form that is beneficial for the wing downstream, based on which the propeller blade geometry is generated through a rapid inversed design procedure. As compared with the Minimum Induced Loss (MIL) propeller at a specified thrust level, significant improvements of both the lift-to-drag ratio of the wing and the propeller/wing integrated aerodynamic efficiency is achieved, which shows great promise to deliver aerodynamic benefits for the wing within the propeller slipstream without any additional devices.     

光致伸缩作动器对开口球壳的主动振动控制

基于电压源模型,推导出薄膜式光致伸缩作动器应变与光强的本构关系。建立光电层合球壳系统动力学方程及模态控制方程。利用规格化后的模态控制因子对球壳子午线方向及圆周方向的薄膜与弯矩效应进行评价,不同位置下的模态控制因子为作动器布局优化提供了依据。将LQR控制算法与光源激励策略相结合,确定光电层合球壳系统的主动控制策略。进行主动振动控制仿真,得到球壳位移及控制光强响应曲线。仿真结果表明,在较低能量的控制光强下,光致伸缩作动器可实现对球壳的主动振动控制,且振动抑制效果明显。
     

风洞分布式支撑天平测力试验技术研究

采用双尾支撑测量形式的加工、装配误差会使系统内应力过大,影响测量精度。针对某“双机身”飞机CTS 风洞试验气动力测量需求,发展基于多维力天平内置的风洞分布式支撑天平测力试验技术;研制具有消除系统内应力功能的双支撑系统,提出两种6 分量双支撑天平校准及测力方法,并对数据处理和双支撑系统可靠性进行检验加载、对比分析和验证。结果表明：风洞分布式支撑天平测力试验技术能够有效消除双支撑天平系统由于过约束而导致的固有装配内应力,双支撑天平系统各部分连接、测量可靠;两种校准测力方法测量精度相当,均能达到单台应变天平测量误差水平,可满足风洞试验测量精度需求;综合考虑现有校准设备校准能力,最终采用“合成式校准测力”方法进行的风洞试验,获得了满意的试验测力精度。     

基于FPGA的高速FIR数字滤波器设计

分布式算法是一项重要的FPGA技术,广泛地应用在数字信号处理领域。文章介绍了分布式算法原理及其改进,设计了一种高速8阶FIR数字滤波器,并进行了仿真验证。最后,对FPGA资源利用和工作速度两方面做了比较和分析。     

Exploring mission planning method for a team of carrier aircraft launching

High-level efficiency and safety are of great significance for improving the fighting capability of an aircraft carrier. One way to enhance efficiency and safety level is to organize the carrier aircraft into combat effectively. This paper studies the mission planning problem for a team of carrier aircraft launching, and a novel distributed mission planning architecture is proposed. The architecture is hierarchical and is comprised of four levels, namely, the input level, the coordination level,the path planning level and the execution level. Realistic constraints in each level of the distributed architecture, such as the vortex flow effect, the crowd effect and the motion of aircraft, are considered in the model. To solve this problem, a distributed path planning algorithm based on the asynchronous planning strategy is developed. The proposed Mission Planning Approach for Carrier Aircraft Launching(MPACAL) is validated using the setups of the Nimitz-class aircraft carrier.Compared to the isolated planning architecture and the centralized planning architecture, the proposed distributed planning architecture has advantages in coordinating the launch tasks not only belonging to the same catapult but also when all different catapults are considered. The proposed MPACAL provides a modeling method for the flight deck operation on aircraft carrier.     

Fault-tolerant control and vibration suppression of flexible spacecraft: An interconnected system approach

This paper considers a fault-tolerant control and vibration suppression problem of flexible spacecraft. The attitude dynamics is modeled by an interconnected system, in which the rigid part and the flexible part are coupled with each other. Such a model allows us to use the interconnected system approach to analyze the flexible spacecraft. Both distributed and decentralized observer-based fault-tolerant control schemes are developed, under which the closed-loop stability of flexible spacecraft can be ensured by using the cycle-small-gain theorem. Compared with the traditional method, this paper considers the faults occurred not only in the rigid parts, but also in the flexible parts. In addition, the application of the interconnected system approach simplifies the system model of flexible spacecraft, thereby the difficulty of theoretical analysis and engineering practice of fault-tolerant control of flexible spacecraft are greatly reduced. Simulation results show the effectiveness of the proposed methods and the comparison of different fault-tolerant control approach.     

带反馈分布式不同维传感器状态估计技术

论述了带反馈分布式信息融合系统中传感器观测维数不同时的状态估计方法。在多传感器系统中，目标的测量是在极坐标中获得，而数据处理通常是在直角坐标中完成。由于二维传感器不能获得观测目标的俯仰信息，其估计将会产生一定的动态误差。在分布式的信息融合系统中，各传感器需要将各自的局部估计送到融合中心进行统一处理。如果不适当地减小这种动态误差，必然将导致整个信息融合系统的估计精度下降。针对上述问题，文章讨论了如何利用系统反馈信息，减小二维传感器的局部估计误差，从而提高整个系统的估计精度。最后，给出了算法的仿真分析。仿真结果表明该方法能够有效地减小系统动态误差。     

一种新型MEMS移相器设计

建立Ka波段分布式MEMS移相器的等效电路,设计基于此模型的分布式MEMS移相器,并对其反射损耗与插入损耗进行优化。仿真结果表明,该模型在4GHz工作带宽内反射损耗小于-15dB,在10GHz带宽内插入损耗大于-2dB,单桥相移达到35°。