三层壁喷管的不稳定导热

文章介绍了固体火箭发动机三层壁喷管的不稳定导热的计算方法,导出壁面温度分布规律和各层壁温的计算公式,并指出工作时间与内表面壁温和影响喷管烧蚀的关系。     

关于建立高阶差分格式的问题

为了能在不太密的网格上捕捉到流场的细致结构。通常采用高阶精度的差分 式进行数值模拟。为能抑制计算中和在激波附近产生的虚假波动,本文从物理构思出发,提出了建立高阶格式的两个基本原则,作者称之为抑制波动的原则和稳定性原则。     

合金元素及第二相对钨的影响

综述了活化烧结元素,合金化元素,杂质元素及化合物对钨合金组织和性能的影响,并对新型钨基合金及其复合材料的研究、开发提出了一些看法。     

谐振式加速度计自激振荡电路性能评价方法的研究

针对谐振式加速度计成品率不高、精度低等问题，以石英振梁加速度计为例，采用引进标准信号，将谐振电路作为“黑盒子”，对其开展独立的评价。通过评价电路的驱动电压幅值稳定性、移相稳定性、全温幅值/相位对称性等指标，与加速度计实际指标建立了一一对应的关系，为加速度计研制与性能提升提供了有效依据。实际运用表明，电路噪声性能、温度性能大幅提升，产品成品率从70%提高到了约90%。     

类Clipper再入返回飞行器气动特性分析

针对类Clipper再入返回飞行器的气动特性,采用近似反设计的方法,在飞行器外包络等约束条件下,通过形状控制函数,计算出类Clipper飞船的气动外形。基于计算流体动力学(CFD)数值模拟方法,研究分析类Clipper再入返回飞行器在不同高度、不同马赫数和不同攻角下的全空域/速域气动特性变化规律,并结合不同飞行状态下的压心位置探讨飞行器的稳定性。结果表明:类Clipper再入返回飞行器在不同飞行状态下能够具有良好的气动特性,最大升阻比可达1.1以上,属于中等升阻比再入,总体呈现出良好的静稳定性,可在未来作为具有可重复使用再入返回飞行器的方案之一。     

空间站梦天载荷舱结构设计与验证

针对天宫空间站梦天载荷舱提出了采用一种含大开口的半硬壳铆接结构,实现了结构承载、载荷进出舱及载荷试验平台一体化设计。采用数值仿真的方法,考虑主动段飞行及地面整器起吊载荷等因素的影响,进行了结构强度迭代分析,识别结构的潜在薄弱环节,并开展针对性的局部结构验证试验。最后,设计并建立大开口结构的全工况静力试验平台,开展载荷舱整舱静力试验。数值计算与试验所得结果吻合较好,验证了载荷舱大开口结构设计的正确性。载荷舱结构的设计方法及验证思路可为其他飞行器结构提供参考。     

Periodic atomization characteristics of an impinging jet injector element modulated by Klystron effect

An experimental study on the Klystron effect of periodic injection modulated by pressure drop fluctuations on subsequent atomization is conducted. Time-resolved atomization backlit images and atomization Mie scatter images are captured by using the high speed camera. It is found that periodicity of forced atomization relies on pressure drop fluctuation amplitude and phase differences between atomization and pressure drop fluctuations relate to fluctuation frequencies. This feature of periodic atomization induced by Klystron effect corresponds to periodicities and high amplitudes of pressure fluctuations in unstable combustion chambers and chaos and low amplitudes of pressure fluctuations in stable combustions chambers. Drastically periodic varying of gross surface area of droplets with time was shown in Mie scatter images. The importance of periodic impinging jet atomization modulated by pressure drop fluctuations for acoustic liquid propellant combustion instabilities is illustrated.     

Modeling and control for cooperative transport of a slung fluid container using quadrotors

In this paper, dynamic modeling and control problem for transfer of a sloshing liquid container suspended through rigid massless links from a team of quadrotors are investigated. By the proposed solution, pose of the slung container and fluid sloshing modes are stabilized appropriately. Dynamics of the container-liquid-quadrotors system is modeled by Euler-Lagrange method. Fluid slosh dynamics is included using multi-mass-spring model. According to derived model, a proper control law is designed for a system with three or more quadrotors. Implementing the proposed control law, quadrotors can control pose of the container, directions of the links and liquid sloshing modes simultaneously. Stability of closed loop system of tracking errors and sloshing modes are demonstrated using a theory of singularly perturbed systems and Lyapunov stability theorem. Also, the capability of the proposed feedback control laws in solving a formerly organized transport problem of a liquid filled container has been demonstrated in simulations. Moreover, priority of the proposed control scheme to an existing slung load controller in the literature is demonstrated.     

A multi-order method for predicting stability of a multi-delay milling system considering helix angle and run-out effects

In this paper, a multi-delay milling system considering helix angle and run-out effects is firstly established. An exponential cutting force model is used to model the interaction between a work-piece and a cutting tool, and a new approach is presented for accurately calibrating exponential cutting force coefficients and cutter run-out parameters. Furthermore, based on an implicit multi-step Adams formula and an improved precise time-integration algorithm, a novel stability prediction method is proposed to predict the stability of the system. The involved time delay term and periodic coefficient term are integrated as a comprehensive state term in the integral response which is approximated by the Adams formula. Then, a Floquet transition matrix with an arbitrary-order form is constructed by using a series of matrix multiplication, and the stability of the system is determined by the Floquet theory. Compared to classical semi-discretization methods and full-discretization methods, the developed method shows a good performance in convergence, efficiency, accuracy, and multi-order complexity. A series of cutting tests is further carried out to validate the practicability and effectiveness of the proposed method. The results show that the calibration process needs a time of less than 5 min, and the stability prediction method is effective.     

Kink mode m = 1 in magnetic tube with discontinuous magnetic field

In this paper, we study conditions of realization and stability of kink modes with azimuthal wave numbers $m=\pm 1$ in cylindrical plasma flex with twisted magnetic field and homogeneous current along its axis. We assume permanent axial magnetic field both inside and outside the flex, surrounded by currentless plasma. Azimuthal magnetic field decreases inversely proportional to the distance from the boundary beyond the flex. We derived dispersion equations for stable and unstable modes in approximation of “thin” plasma flex. The analysis of equations has been provided for the case of discontinuous axial magnetic field on flex’s boundary. Conditions of propagation of wave modes have been defined. It was shown, that unstable modes can be implemented in certain interval of longitudinal wavenumbers. Results can be applied for the interpretation of solar magnetic tubes behavior, using measurements, provided by spacecrafts.