单向阀三维动态流场稳定性仿真研究

对单向阀自激振动机理进行研究,采用线性分析方法提出了单向阀的临界稳定曲线。应用泵阀仿真软件PumpLinx的动网格技术,开展了单向阀三维动态流场仿真分析,数值研究了不同工作压力、不同质量流量条件下的单向阀动态稳定特性。结果表明:在某一工作压力条件下,小流量时单向阀工作不稳定,会形成周期性的阀门颤振,随着质量流量增大,单向阀动态稳定性增强;当质量流量足够大时,单向阀工作稳定,单向阀保持稳定开度工作;质量流量一定时,工作压力降低,单向阀动态稳定性增强。单向阀三维动态流场仿真结果与线性稳定性结论相一致,从三维动态流场角度验证了单向阀自激振动机理及线性稳定性分析方法的有效性。     

加载单脊波导的微波色散特性研究

理论上分析了计算了所设计的加载ＬｉＮＢＯ３单片的单脊波导在微波Ｘ波段的色散特性,实验上测量了此色散特性,两者具有较好的一致性,并表明该波导实现了微波与光波的速度匹配而诚为宽带行波光调制器。     

二维抛物化稳定性方程计算

针对二维抛物化稳定性方程(PSE)在法向上采用正交函数展开法进行了计算.在求解PSE的初始条件以及L0的中性曲线中应用了Chebyshev多项式展开.计算结果表明可以获得非常精确的解,证实了在PSE中应用Chebyshev多项式的有效性.     

具有多个执行机构Lurie系统的时滞相关稳定性

Ｌｕｒｉｅ时滞控制系统是工程实践中经常遇到的一类重要的非线性控制系统,本文根据微分方程理论,提出了不确定性具有多个执行机构的Ｌｕｒｉｅ时滞控制系统时滞相关稳定的充分性判据,并给出系统衰减速度的估计方法。该方法仅需假定时滞有界,因而其结论适扩用于变时滞的系统。文末给出应用本文结果的两个应用实例,并与相关成果进行了比较,计算结果表明了本文方法的有效性。     

谐振式加速度计自激振荡电路性能评价方法的研究

针对谐振式加速度计成品率不高、精度低等问题,以石英振梁加速度计为例,采用引进标准信号,将谐振电路作为"黑盒子",对其开展独立的评价.通过评价电路的驱动电压幅值稳定性、移相稳定性、全温幅值/相位对称性等指标,与加速度计实际指标建立了一一对应的关系,为加速度计研制与性能提升提供了有效依据.实际运用表明,电路噪声性能、温度性...     

Testing baseline stability of some neutron monitors in Europe,Africa, and Asia

For six decades, the global network of neutron monitors (NMs) has provided a continuous stream of very valuable data to the heliophysics community, leading to many insights into the myriad modes of charged particle transport in the tangled magnetic fields that permeate the 3D heliosphere. Earlier, Ahluwalia and Ygbuhay (2012) reported on the drifts in some high latitude NM counting rates in the American zone. We continue our enquiry by testing the stability of the counting rate baselines of some NMs operating in Europe, Africa, and Asia. The data from these detectors have been extremely valuable for the short-term time variation studies, but caution is advised in using the data for long-term studies from NMs with baselines that are drifting for cause(s) unknown.     

Aerothermodynamic and stability analyses of a deployable re-entry capsule

Recent research projects, in the field of atmospheric re-entry technology, are focused on the design of deployable, umbrella-like Thermal Protection Systems (TPSs). These TPSs are made of flexible high temperature resistant fabrics, folded at launch and deployed in space for de-orbit and re-entry operations. In the present paper two possible sphere–cone configurations for the TPS have been investigated from an aerodynamic point of view. The analyzed configurations are characterized by the same reentry mass and maximum diameter, but have different half-cone angles (45° and 60°). The analyses involve both the evaluation of thermal and aerodynamic loads and the assessment of the capsule longitudinal stability. The aerothermodynamic analysis has been performed for the completely deployed heat shield in transitional and continuum regimes, while the longitudinal stability has been analyzed in free molecular, transitional and continuum regimes, also taking into consideration the heat shield deployment sequence at high altitudes.     

某型飞机纵向平衡速度的调整

通过对影响飞机纵向平衡速度的结构特性和气动原理的分析,指出了飞机纵向平衡速度调整中存在的问题,给出了不同飞机有效调整纵向平衡速度的方法。     

航天测控装备跟踪质量考核标准分析

针对航天测控装备在役考核标准缺乏的问题，分析了航天测控（Space tracking telemetry and control，TTC）标准的现状，梳理了可用于在役考核的现有航天装备相关标准。提出了航天测控装备考核跟踪质量稳定性的参考标准，分析了标准对在役考核要求的适用性，并对跟踪质量稳定性考核科目进行了修正扩展。实际工程算例表明考核效果合理有效，跟踪质量稳定性考核标准可为在役考核标准制定提供借鉴参考。