红外低辐射层与吸波层参数匹配性研究

研究了红外材料与吸波材料参数匹配。结果表明,随着红外填料含量增加,红外辐射系数逐渐变小;磁导率变化很小,磁导率值也较小;而介电常数相对较大,且随着填料含量增加,介电常数开始急剧增大,后变平缓。填料含量相同时,片状填料颗粒比球状填料颗粒的红外辐射系数低。在填料参数及其含量选择适当情况下,可以兼顾红外及雷达吸收性能。     

陀螺稳定平台数字稳定电路硬件设计与实现

针对某型陀螺稳定平台目前仍然采用模拟稳定电路的问题，设计了陀螺稳定平台数字稳定硬件电路。数字稳定硬件电路采用DSP处理技术、24位高精度AD采集技术及H桥功率放大技术。实验结果表明，该电路能满足各种性能指标要求。该电路的实现为后续自适应控制理论、数字化及智能化控制技术应用于陀螺稳定平台奠定了硬件基础。     

飞机数字化设计数模发放控制

数字化产品和过程模型、产品信息管理、高性能计算、以及数据传输，已经成为飞机型号研制中的重要技术手段。结合数字化技术在飞机型号研制中的实际应用，探讨了设计数据模型发放过程控制，包括发放原则、发放流程、数据文件准备和发放审签等，对数据模型的审签过程控制内容做了详细的论述；介绍了数据模型成熟度以及数据文件的存储、获取和归档管理。     

飞机纵向起飞着陆动态特性仿真研究

以刚体系动力学理论为依据,结合飞机起飞着陆运动学特征,建立了起落架-机身组合刚体6自由度全量飞机方程。文内建立的阶跃跟踪驾驶员时域数学模型,有助于评价起飞着落阶段人-机系统的飞行品质。根据该系统的数学模型编制了FORTRAN软件,并对起飞着陆动态特性作出了综合的全面的定量分析。     

数字示波器自动检定程序库的开发

较为详细地阐述了数字示波器全自动检定系统程序库的开发 ,满足了多种数字示波器自动检定的需求。硬件采用 95 0 0示波器校准仪 ,软件平台采用 90 10校准软件。     

用于ZEEMAN频率测量的数字合成器

ZEEMAN频率是氢脉泽时间频率标准的一个重要工作参数,为此上海天文台研制了一种专用的数字频率合成器,用来测量ZEEMAN频率。描述了该数字频率合成器的工作原理、设计方法和应用结果,该数字合成器,就配备在上海天文台新研制成功的氢脉泽标准而言,以其性能与价格而论,证明是成功的。     

汽室型铷原子频标中微波腔的小型化

讨论了实现汽室型铷原子频标微波腔小型化的技术途径,给出了自主研制的小型化微波腔的三维仿真结果和外型结构,介绍了以新研制的小型微波腔为基础构成的小型化腔泡系统。小型化微波腔的研制成功,使整个物理系统的体积减小。在小型化的条件下,整机短期频率稳定度达到了国际同类产品水平。     

Advanced architectures for real-time Delay-Doppler Map GNSS-reflectometers: The GPS reflectometer instrument for PAU (griPAU)

In recent years Global Navigation Satellite System’s signals Reflectometry (GNSS-R) has stood as a potential powerful remote sensing technique to derive scientifically relevant geophysical parameters such as ocean altimetry, sea state or soil moisture. This has brought out the need of designing and implementing appropriate receivers in order to track and process this kind of signals in real-time to avoid the storage of huge volumes of raw data. This paper presents the architecture and performance of the Global Positioning System (GPS) Reflectometer Instrument for PAU (griPAU), a real-time high resolution Delay-Doppler Map reflectometer, operating at the GPS L1 frequency with the C/A codes. The griPAU instrument computes 24 × 32 complex points DDMs with configurable resolution (Δf_Dmin = 20 Hz, Δτ_min = 0.05 chips) and selectable coherent (minimum = 1 ms, maximum = 100 ms for correlation loss Δρ < 90%) and incoherent integration times (minimum of one coherent integration period and maximum not limited but typically <1 s). A high sensitivity (DDM peak relative error = 0.9% and DDM volume relative error = 0.03% @ T_i = 1 s) and stability (Δρ/Δt = −1 s⁻¹) have been achieved by means of advanced digital design techniques.     

辐射计反射面天线面形精度对其主波束效率影响研究

以FY-3卫星微波成像仪天线为模型,对反射面天线面形精度对天线主波束效率的影响进行了分析。提出基于数值拟合法的公式,用GRASP软件半物理仿真结果,修正Ruze公式关于面形精度影响因子的表达式,实现了工程中天线主波束效率快速估算。该方法减小了Ruze公式中由于假设口径场等幅同相分布引起的计算误差,采用该方法后计算精度可控制在1%以内。最后针对多馈源共用反射面的辐射计天线提出了分区域分析面形精度的方法。     

Residual stress determination in friction stir butt welded joints using a digital image correlation-aided slitting technique

This paper presents an incremental cutting method for evaluating the longitudinal residual stresses in a butt welded thin plate via combining the traditional residual stress measurement methods and the advanced optical technique.The proposed approach,which can be called digital image correlation (DIC)-aided slitting technique,introduces a successive extension slot to a speci men and employs the DIC technique to measure the released displacement profiles of the cutting sections after each cutting increment.Then the displacement profiles are used to directly calculate the residual stress distributions up to the slot tip and hence,a stress distribution can be obtained after a cutting increment.Finally,all of the stress distributions are averaged to ultimately determine the original residual stress field.This method does not include any complex experimental operations or tedious derivation,and the resolution of stress variation is greatly improved by the continuous measurement of the released displacements.The presented method has been preliminarily verified by a specimen with residual stress introduced by a four-point bending test.The results show that residual stresses determined by the DIC-aided slitting technique agree well with those from finite element (FE) prediction.The residual stress in a friction stir welded aluminum specimen obtained by the presented technique is also consistent with the evaluations given by X-ray diffraction.Fur thermore,the residual stresses obtained by the DIC-aided slitting technique demonstrate higher accuracy and stability than the evaluations derived by the DIC-aided contour method.