Optimization of communication network topology for navigation sharing among distributed satellites

Navigation sharing among distributed satellites is quite important for coordinated motion and collision avoidance. This paper proposes optimization methods of the communication network topology to achieve navigation sharing. The whole communication network constructing by inter-satellite links are considered as a topology graph. The aim of this paper is to find the communication network topology with minimum communication connections’ number (MCCN) in different conditions. It has found that the communication capacity and the number of channels are two key parameters affecting the results. The model of MCCN topology for navigation sharing is established and corresponding method is designed. Two main scenarios, viz., homogeneous case and heterogeneous case, are considered. For the homogeneous case where each member has the same communication capacity, it designs a construction method (Algorithm 1) to find the MCCN topology. For the heterogeneous case, it introduces a modified genetic algorithm (Algorithm 2) to find the MCCN topology. When considering the fact that the number of channels is limited, the Algorithm 2 is further modified by adding a penalized term in the fitness function. The effectiveness of these algorithms is all proved in theoretical. Three examples are further tested to illustrate the methods developed in this paper.     

相对差分单向测距（△DOR）技术在探月工程中的应用研究

相对差分单向测距（△DOR）是一种高精度测角技术,在深空探测任务的高精度测定轨方案中得到广泛应用．介绍了△DOR测量的基本原理及CCSDS（国际空间数据系统委员会）关于△测量的相关标准．针对中国探月工程月面软着陆任务提出的高精度测定轨要求,分析了△DOR测量的信号形式、工作模式以及测量精度,推导了解模糊过程．研究表明,△DOR测角精度达到25nrad,对应到月球上的距离约为10m．     

The photometric study of light scattering from the surface of alumina powder and interpretations by Hapke formula

A laboratory experiment helps to understand the light scattering property of regolith like samples with known compositions and other physical parameters. The laboratory data so obtained can be compared with the existing in situ data on celestial objects like asteroids. Further, it may be analyzed with the help of various theoretical models to understand the light scattering processes from regolith more clearly. In this work we have performed laboratory based photometry of the light scattered from the surfaces of powdered alumina (Al₂O₃) at various tilt angles of the sample and at large phase angles, with the particles having diameter 0.3 μm. The wavelength of observation was 632.8 nm. These data have been fitted by a surface scattering model originally suggested by Hapke. Instead of using empirical Henyey–Greenstein phase function to fix the values of albedo and phase function to be used within Hapke formula, we have used Mie theory for the same. This approach helped us to determine the single particle properties such as particle diameter and complex refractive index from surface scattering phase curve alone. Mie theory depends only on the size parameter X(=2π(radius/wavelength)) and complex refractive index (n, k) of the material. Since the absorption coefficient (k) for alumina is known to be very low but not exactly zero, the best fit to the experimental data was obtained by least square technique with k as a free parameter, as the other parameters are known. Finally, we compare our results with other published results and discuss the scope of application of the method we adopted.     

融合粗糙集与D-S证据理论的航空装备故障诊断

针对航空电子装备故障诊断中出现的多源诊断信息存在冲突的情况,基于粗糙集与证据理论在处理不确定问题时的优势,提出了一种融合粗糙集与证据理论的故障诊断方法.该方法利用粗糙集将信息源给出的诊断数据转化为证据理论中的mass函数,进行结果融合.同时,该方法给出边界粗糙熵的定义,并基于边界粗糙熵获得反映各信息源在诊断融合过程中重要度的动态权重参数,提出一种新的证据理论的冲突合成规则.仿真实验表明,该方法可以有效地提升诊断信息融合结果的准确性,在航空电子装备故障诊断方面有较好的实用价值.      

高精度法矢下切割面自适应的凸曲面射线寻迹

针对电大尺寸目标难以精确解析表达带来的一致性几何绕射算法应用难问题,提出了基于三角网格、适用于任意凸曲面的射线寻迹（TM-tracing）算法。应用工程中较易获取的三角网格及其协议,设计了一种满足快速多边搜索条件的网状数据存储链表;提出了满足寻迹要求的高精度法矢求解算法;采用切割面自适应调整的弧形拟合寻迹方法实现了爬行波寻迹算法;结合一致性几何绕射理论（UTD）实现了暗区场值求解算法。任意网格曲面射线寻迹结果表明:本文提出的寻迹算法适用于包括球、柱和锥在内的任意光滑凸曲面,寻迹偏差小于1.61%,寻迹速度为2.8 s,具有一定的工程应用价值。      

多GNSS全球电离层建模特性及其精度检验

分别以GPS单系统和融合BDS,GPS,GLONASS三系统两种方案,采用载波相位平滑伪距观测值和球谐函数,构建了全球电离层延迟模型并进行了对比和分析.本文以GPS单系统和融合三系统两种方法反演了2014年1月每日电离层变化过程,解算得出了频间偏差的月综合产品,并对结果进行了对比和分析.事实上,三系统融合不仅增加了可观测的卫星数,而且改善了穿刺点的几何分布.分析结果表明,三系统融合反演全球电离层在精度上优于GPS单系统,均有5~10 TECU的提高.计算得到的频间偏差结果显示,GPS优于GIONASS,BDS稳定性则较次之.     

冗余系统两种应力-强度分布模型的可靠度计算

本文运用应力-强度干涉理论,说明如何确定相同设备(或元件)构成的冗余系统的可靠性。讨论了冗余系统的并联和从n中取k两种结构形式的数学模型,推导了应力和强度服从瑞利分布的并联冗余系统,以及应力和强度分别服从麦克思韦分布和瑞利分布n中取k冗余系统的数学公式。最后,给出这两个模型在应力作用下,对应于不同的强度参数,设备或元件的可靠性曲线,直观地说明应力强度参数的改变对可靠性的影响。     

有色噪声补偿下降阶系统状态的最优估计

在大型空间结构的控制系统设计中,降阶系统的状态估计是非常重要的环节,它直接关系到控制器的性能。针对B.Friedland的工作,本文提出了有色噪声补偿模型,在恒等变换下显式地消去了有色噪声项,利用正交投影定理仅对感兴趣的状态分量导出了无偏、最小方差估计。这组递推估计式与采用增广状态方法相比,不仅在处理容量、计算效率上有很大改进,而且是标准Kalman滤波方程的推广。注意到原系统与降阶系统之间的内在联系,本文采用随机系统分析方法,给出了在高斯、马尔可夫假设下,有色噪声模型特征参数的在线识别技术。数字仿真表明,对偏差补偿起主要作用的是有色噪声补偿模型中的驱动白噪声项,这是对B.Friedland工作的发展。     

神经网络控制在综合火力／飞行系统中的应用

提出了两种基于模糊控制的神经网络控制器的设计方案，并将这两种控制器应用于综合火力／飞行系统的耦合控制。两种方法的主要差别在于获取样本的方式不同。方案１是通过对模糊控制方法得到的响应曲线采样获取样本，由Ｂａｃｋ－Ｐｒｏｐａｇａｔｉｏｎ学习算法训练神经网络，得到一组固定权值。神经网络控制器采用这组权值以“联想记忆”的方式工作。方案２则从用模糊控制算法得到的控制查询表中获取样本。因为模糊控制查询表比较大，采样时依据该表构成的相平面图的特点，对采样点数进行了压缩，使所设计的神经网络的规模可以接受，其余的设计步骤与方案１基本相同。仿真结果表明，采用这两种神经网络控制器的控制系统都具有良好控制性能     

一种用于可靠性参数指标分配的新方法

提出了一种按组成系统的各单元任务失效率比例，并考虑各单元的重要度来分配系统可靠性参数指标的新方法；给出了分别以失效率、平均故障间隔时间表达的分配比例因子及分配公式。该方法是ＡＧＲＥＥ分配法的改进。文末举例说明该方法的应用及其分配结果的合理性