介质振荡器的设计

为了实现微型化相干布局囚禁（CPT）原子钟,需要设计出小体积、低功耗的微波电路。本文介绍了利用介质振荡器（DRO）实现的适合微型CPT原子钟的微波电路,首先利用ADS（Advanced Design System）软件实现了介质振荡器的仿真,然后根据仿真结果设计并实现了振荡器电路,测试结果表明：输出微波频率为3.4GHz、功率为-4dBm、功耗为37mW。     

含硅芳炔树脂改性氰酸酯树脂的性能

将双酚E型氰酸酯(BEDCy)与含硅芳炔树脂(PSA)用溶液共混的方法制备了共混树脂(BEDCy/PSA);通过DSC和原位红外研究了共混树脂的固化反应,使用TGA和DMA表征了树脂的耐热性能;还考察了共混树脂的介电性能和力学性能.结果表明,PSA树脂能够降低BEDCy树脂的固化温度;随着PSA树脂的添加,氮气和空气氛...     

Ion engine grids: Function,main parameters,issues, configurations,geometries, materials and fabrication methods

Ion optics are crucial components of ion thrusters and the study of the different ion extraction solutions used since the beginning of the electric propulsion era is essential to understand the evolution of ion engines. This work describes ion engine grids' main functions, parameters and issues related to thermal expansion and sputter erosion, and then introduces a review of ion optics used for significant launched and tested ion thrusters since 1970. Configurations, geometries, materials and fabrication methods are analyzed to understand when typical ion thrusters use two or three grids, what are the thicknesses and aperture sizes of the screen, accelerator and decelerator grids, why molybdenum and carbon-based materials such as pyrolytic graphite and carbon–carbon are the best available options for ion optics and what is the manufacturing method for each material.     

Flow separation control on swept wing with nanosecond pulse driven DBD plasma actuators

A 15° swept wing with dielectric barrier discharge plasma actuator is designed.Experimental study of flow separation control with nanosecond pulsed plasma actuation is performed at flow velocity up to 40 m/s. The effects of the actuation frequency and voltage on the aerodynamic performance of the swept wing are evaluated by the balanced force and pressure measurements in the wind tunnel. At last, the performances on separation flow control of the three types of actuators with plane and saw-toothed exposed electrodes are compared. The optimal actuation frequency for the flow separation control on the swept wing is detected, namely the reduced frequency is 0.775, which is different from 2-D airfoil separation control. There exists a threshold voltage for the low swept wing flow control. Before the threshold voltage, as the actuation voltage increases, the control effects become better. The maximum lift is increased by 23.1% with the drag decreased by 22.4% at 14°, compared with the base line. However, the best effects are obtained on actuator with plane exposed electrode in the low-speed experiment and the abilities of saw-toothed actuators are expected to be verified under high-speed conditions.     

Materials selection for electronic enclosures in space environment considering electromagnetic interference effect

Using low power electronic devices for space applications to reduce the mass and energy consumption has lead to electromagnetic interference (EMI) problem. Electronic enclosures are used to shield electronic devices against EMI. In the past, electromagnetic shielding has been mainly the only criteria considered in electronic enclosure design. However, there are several structural and thermal requirements for selection of shielding materials which should also be taken into account. In this research work, three quantitative materials selection methods, i.e. Digital Logic (DL), Modified Digital Logic (MDL), and Z-transformation, are employed to select the best material from among a list of candidate materials. Composite and metallic electronic enclosures are explored and the best material is selected. Z-transformation method is applicable to both of the considered case studies while DL and MDL can only be used for solving one of them. Z-transformation method ranks aluminum as the first choice among various metallic materials. The wide range of Z-transformation application and its practical results confirm the superiority of Z-transformation method over DL and MDL methods.     

介质材料对频率选择表面传输特性的影响

通过理论计算和实验验证分析了介质材料对频率选择表面传输特性的影响规律,讨论了蒙皮的厚度、介电常数,芯层厚度、介电常数四个因素对FSS的通带位置、宽度、损耗的影响。结果表明,蒙皮和芯层厚度增厚会使通带位置向低频移动,厚度减小通带位置向高频移动;蒙皮和芯层介电增大会使通带位置向低频移动,介电减小通带位置向高频移动。并测试了同样结构的FSS平板传输特性,理论分析和实验结果一致性较好。     

二烯丙基双酚 A 共聚双马来酰亚胺改性氰酸酯树脂的性能

采用二烯丙基双酚A和二苯甲烷型双马来酰亚胺与双酚A型氰酸酯共聚,以改善氰酸酯树脂的工艺和耐热性能;利用DSC,TGA,DMA表征了树脂的固化行为和耐热性能;此外,还研究了树脂的力学性能及高频下的介电性能。结果表明,改性后的氰酸酯树脂固化反应温度降低了约60℃,改性树脂固化物在氮气气氛下Td5约400℃,Tg约270℃,显示了良好的耐热性能。在7~15 GHz宽频范围下,改性树脂的介电常数3,介电损耗0.008~0.01,显示了良好的介电性能。     

网络分析仪法测量稠油介电常数

用网络分析仪在Ｘ波段８～１１．５ＧＨｚ的６个频率点上,对大港、胜利、辽河油田稠油的介电常数进行测量,测量结果可以为微波采油工艺中的井下轴射器的设计及微波能利用率的估算提供理论依据,并对测量结果进行了误差分析。     

电介质材料射频电参数校准系统的组建

在介绍电介质材料电参数测量方法的基础上,研究了电介质材料1MHz-1GHz射频电参数量值溯源和测量方案：采用自行研制谐振法校准装置和（射频Ⅰ-Ⅴ法和自动平衡电桥法）商用仪器组建电介质材料射频电参数校准系统。介绍了系统基本原理,阐述了谐振法校准装置电极系统结构设计特点,分析了校准系统的测量不确定度。     

用MLFIPWA求解二维介质柱电磁散射

将多层快速非均匀平面波算法（MLFIPWA）用于求解二维介质柱的电磁散射,给出了计算模型。在积分方程法求解电磁散射中,用快速非均匀平面波算法（FIPWA）对目标分层分组,附近区直接计算,非附近区通过聚合、转移和配置加速矩矢相乘,减小MLFIPWA的数值计算量。算例表明：MLFIPWA特别适于处理电大尺寸目标的电磁散射。