MEMS偏航角速度传感器在旋转导弹稳定回路中的应用

在旋转导弹稳定回路中,采用MEMS偏航角速度传感器用于弹体偏航角速度的测量,偏航角速度传感器是旋转导弹控制回路的重要组成部分。提出了一种全新的MEMS偏航角速度传感器技术方案,解决了MEMS偏航角速度传感器正交耦合、力学环境适应性、波形畸变等问题,实现了旋转导弹偏航角速度信号的精确测量。     

飞机大振幅非定常滚转运动的非线性稳定性分析

本文根据某飞机大振幅非定常滚转力矩的风洞试验结果,采用两种方法,计算了飞机绕体轴作自由滚转运动时的滚转角时间历程,分析研究了飞机非线性滚转运动的稳定性,并对非定常空气动力对飞机稳定性的影响作了较深入的研究。本文通过两种滚转运动时间历程结果的比较,表明了给出的从大振幅实验提取常规动导数方法是可行的;而且也表明了通过测量飞机绕体轴滚转时大振幅非定常滚转运动时的滚转力矩值,可以研究飞机的摇滚（Ｗｉｎｇ     

自由滚转尾翼试飞器滚转特性分析

自由滚转尾翼是解决鸭式布局导弹的鸭式舵难以差动兼作副翼进行滚动控制的一种技术途径.为验证某鸭式布局试飞器采用自由滚转尾翼方案的可行性,进行了试飞器的固定尾翼和自由滚转尾翼两种模型的风洞试验.试验结果表明,固定尾翼试飞器,当鸭舵作副翼偏转进行滚控时,在尾翼上会产生很大的诱导滚动力矩,抵消鸭舵的控制力矩,致使鸭舵不能进行滚转控制;滚转尾翼可有效减小诱导滚动力矩,实现通过鸭舵进行全弹滚转控制的目的.     

轧波胀形成形工艺应用研究

介绍了轧波成形+胀形的工艺过程、设备原理及技术改进.首先用轧波成形制出工件的大概形状,然后再用胀形工艺校圆.该成形方法不仅要求工装简单,而且成形精度较高,适用于旋转环形钣金零件.     

Inconel718十二角头螺栓制造工艺技术研究

介绍了Inconel 718十二角头螺栓的材料和结构特点,分析了关键制造加工技术,如热镦锻、热处理、滚压螺纹等,确定了合理的工艺参数,并对研制件的尺寸和性能进行了评估,结果表明工艺技术设计合理。     

Fundamentals of Design and Technology of Rolling Element Bearings

This article presents an overview of fundamentals of rolling element bearing designs and technologies. The aim is to outline the complex interrelation of all fundamentals with the rolling contact fatigue and the attainable bearing life. Such fundamentals include, amongst others, bearing stressing and life capability. The article shows the different types of rolling bearing stressing and the analysis of the stress distribution (principal stresses and equivalent stresses) in the material under the rolling contact area. It becomes obvious that the contamination of the bearing with foreign particles leads to a drastic reduction in bearing life. Furthermore, it demonstrates the impact of the bearing lubrication and coating as well as the effect of additives on the attainable life and wear. Further fundamentals of rolling element bearing design are the materials, the material cleanliness and the heat treatment. The article reveals the importance of the cleanliness of bearing steels as well as different types of inclusions and their effect on rolling contact fatigue. Additionally the article describes how to optimize the material properties (strength, toughness and residual stress) by the heat treatment processes. The outcome of these investigations is that endurance life of a rolling element bearing can be achieved if specific operating conditions, an adequate lubrication, good system cleanliness and specific bearing stressing are met. The article provides a guideline for bearing engineers on how designs and technologies can be applied to optimizing a bearing for a particular industry or aerospace application.     

CP—20卡槽零件一次滚弯成形

介绍了在自制简易滚床上，改进滚模设计，替代原滚边－－折弯相结合的工艺方法，实现一次滚弯成形。改进后的形成方法，保证了产品质量，提高工效８倍，原材料也得到充分利用。     

Investigation of landing gear wheel shimmy taking into account damper frequency characteristics

A mathematical model and a technique for calculating the rolling motion stability of the damper-equipped landing gear wheel are presented; the dependence of dynamic damper rigidity on frequency found experimentally is used in the investigation. The results of calculating the shimmy boundaries with and without regard for the dependence indicated are given.     

微米级自动扫描磨粒形态分析仪运动系统的设计及制造

介绍了自动扫描磨粒形态分析仪运动系统的设计、关键技术的解决途径及制造过程中的关键工艺问题的研究成果．     

简谐摇摆运动下窄通道内空气-水两相流摩擦阻力

矩形窄通道广泛应用于紧凑式换热器设计中,其内空气-水两相流动摩擦阻力受简谐摇摆运动影响而与稳定状态不同。笔者通过实验研究了摇摆运动条件下矩形窄通道内绝热两相流摩擦压降特性。结果表明：层流区（分液相雷诺数Rel〈800）及过渡区（800≤Rel≤1400）摇摆条件下摩擦压降波动周期等于摇摆周期;湍流区（Rel〉1400）摩擦压降没有明显的周期性波动。Lee-Lee模型能较好地用于摇摆条件下平均摩擦压降的预测,但不能用于周期性变化摩擦压降的动态预测。通过分析大量实验数据的变化规律,基于奇斯霍姆C（Chisholm）关系式,拟合得到了摇摆条件下瞬时摩擦压降经验关系式,其预测值与实验值有较好的一致性。