基于线性回归近似替代模型的分布式卫星系统不确定性分析方法

分布式卫星系统在空间科学领域具有广泛的应用前景,同时也对概念设计阶段的分析工作提出了更高的要求.在分布式卫星系统概念设计阶段,评价不确定性参数对于最终探测效能的影响有着重要的工程应用价值.传统的不确定性分析方法存在解析困难、数值模拟计算效率低且耦合关系表征不明确的缺点.本文结合概念设计阶段不确定性分析的特点和需求,提出一种线性回归近似替代模型,将不确定性参数对于探测效能影响的结果计算降维为一个线性组合系数的求解问题.利用一个空间多点探测物理场分界面任务作为典型事例进行仿真验证,结果表明,相比传统数值模拟方法,本文方法在计算效率上具有明显优势且对关键不确定性参数有一定识别作用.     

可靠性设计优化的球空间设计法

可靠性设计优化（RBDO）在航空航天等领域已经被广泛应用,具有显著提高可靠性的效果;然而它包含两个迭代循环-总体优化循环和可靠性分析循环,双循环求解方法效率低下甚至难以承受。本文提出一种可以提高可靠性设计优化求解效率的方法-球空间设计法,该方法可以方便地表达搜索区域,最大可能失效点可以从极值点处精确获取;同时,该方法可以将总体优化以及可靠性分析同步进行。本文所提出的球空间法的有效性将通过2个算例进行测试,测试结果表明该方法不仅精度与同类方法持平,求解效率有明显提升,它将会对提高航空航天装备如卫星、火箭、飞行器等产品的可靠性提供更为有效的方法和技术支持。     

Air-LUSI: A robotic telescope design for lunar spectral measurements

This paper presents the mechanical design of a new robotic telescope that was designed and built to acquire lunar spectral measurements from the science pod of NASA's ER-2 aircraft while flying at an altitude of 70,000 feet (21.34 km). The robotic telescope used a double gimbal design that allowed for target tracking in azimuth and elevation. In addition to the challenging and restrictive geometry of the science pod, each component needed to be carefully selected to ensure that they could withstand the operating conditions at high altitude such as harsh temperatures extending as low as −54 °C and atmospheric pressure less than 1.05 psi (7.23 kPa). Due to the cold temperatures, low atmospheric pressure and the likely exposure to moisture, high strength industrial linear actuators were used to create an adjustable linkage system that controlled the pointing and tracking of the telescope. Although unconventional, this allowed for a robust design that outperformed the team's expectations by tracking the Moon for 40 min with an average tracking error under 0.05°. The results presented within this paper were acquired during a first set of engineering test flights, with further scientific missions to follow.     

机翼－机身－吊架－短舱的跨声速流计算

本文通过使用多块网格的嵌合体技术，计算了机翼－机身－吊架－短舱的跨声速流场。将机翼－机身－吊架－短舱流场分为机翼－机身和吊架－短舱两个子区域，根据嵌套网格结构建立机翼－机身－吊架－短舱的组合网格，分别对这两个子区域根据相应的边界条件独立求解，然后采用嵌合体技术传递两个子区域的干扰信息，通过两个流场的耦合迭代得到机翼－机身－吊架－短舱流场的计算结果，数值模拟结果与实验结果进行了比较，两者吻合较好。     

性能可靠性的Bayes点估计

基于共轭型先验分布与无信息先验分布，给出了正态与对数正态分布的单边与双边性能可靠性的Ｂａｙｅｓ点估计，并用数值例说明了这些方法。     

引射式发动机模拟器的设计与校准试验研究

在战斗机推进系统模拟的试验技术中,发动机模拟器是一个重要的设备,设计一个结构合理,性能优良的发动机模拟器成为该项试验技术的关键。笔者采用守恒方程组,按照工程设计的要求,对引射器的工作效率进行了设计计算。通过对多组参数的计算和分析,针对××型号战斗机的试验要求,设计了一个能模拟该战斗机进排气的动力模拟器,并进行了校准试验研究,对引射器的性能进行了测量,验证了计算方法的可行性。为开展飞机推进系统一体化试验研究,提供了关键的试验技术,建立了工程实用的飞机推进系统模拟试验装置。     

CO2焊外加纵向磁场的数值计算

针对CO2焊时与电极同轴的单个轴对称空心圆柱线圈在励磁电流作用下产生的外加磁场，采用积分方程法建立了磁控CO2焊外加纵向磁场的计算模型，对CO2焊外加磁场进行了数值计算，该方法具有模型简单、计算速度快和精度高等优点，并与实际测量结果进行了比较。计算及实验结果表明，利用所建模型计算得出的外加纵向磁场分布是准确的、可靠和有效的。     

空调冷水变流量设计改进

本文对常规空调冷水变流量系统进行了节能分析，指出按传统设计方法设计的变水量系统不能充分发挥新技术的节能潜力，并提出了改进的设计做法。     

风洞实验应变天平元件优化设计

应用最优化理论对风洞实验应变天平元件结构尺寸优化设计的基本思想作了论述,提出了天平元件多变量优化设计新方法。该设计方法能够保证天平元件的灵敏度与刚度的匹配取得理想值,同时,克服了传统设计方法计算量大的缺点。对于初次从事天平元件设计的人员来说,只要对天平的工作原理和元件变形形式有所掌握,运用该设计方法即可用较快的速度获得最佳结构尺寸。一个实用的天平元件优化设计算法及实例对人们将有所带助。     

Design and examination of a turboprop inlet with scavenge duct

The inlet with scavenge duct is an important part of turboprop aircraft engine. This type of inlet normally has a complex shape, of which the design is challenging and directly affects the flow field quality of the engine entrance and thus the engine performance. In this paper, the parametric design method of a turboprop aircraft inlet with scavenge duct is established by extracting and controlling the transition law of the critical characteristic parameters. The inlet’s performance and internal flow characteristics are examined by wind-tunnel experiment and numerical simulation. The results indicate that a flow tendency of winding up on both sides is formed due to the induction of the inlet profile, as well as a vortex pair on the back side of the power output shaft. The vortex pair dominates the pressure distortion index on the Aerodynamic Interface Plane (AIP). In addition, with the increase of freestream angle of attack, the total-pressure recovery coefficient of the inlet increases gradually while the total pressure distortion index decreases slightly. On the basis of the experimental results under different working conditions, the parametric design method proposed in this paper is feasible.