浅论无人机机载卫通天线尺寸与数字信号传输带宽关系

卫星通信是无人机中继通信的重要手段。本文对无人机卫星通信链路中飞机总体设计关注的机载卫通天线尺寸选择问题进行了较详细的计算、探讨。     

基于C8051单片机的多路温度无线遥测系统

基于C8051F020单片机和DTD465无线数传模块设计了多路温度双向无线遥测系统.温度测量采用铂电阻;无线数传模块基于FSK调制,采用高效前向纠错信道编码技术;系统为低功耗设计.介绍了测量站和主控站的软件,以及数据通信协议.系统已成功地应用于汽车导航实验中,使用结果表明,本系统软硬件设计完善,可靠性高,使用方便.     

Simulation study on slant-to-vertical deviation in two dimensional TEC mapping over the ionosphere equatorial anomaly

With the rapid increase of GPS/GNSS receivers being deployed and operated in China, real-time GPS data from nearly a thousand sites are available at the National Center for Space Weather, China Meteorology Administration. However, it is challenging to generate a high-quality regional total electron content (TEC) map with the traditional two-dimensional (2-D) retrieval scheme because a large horizontal gradient has been reported over east–south Asia due to the northern equatorial ionization anomaly. We developed an Ionosphere Data Assimilation Analysis System (IDAAS), which is described in this study, using an International Reference Ionosphere (IRI) model as the background and applying a Kalman filter for updated observations. The IDAAS can reconstruct a three-dimensional ionosphere with the GPS slant TEC. The inverse slant TEC correlates well with observations both for GPS sites involved in the reconstruction and sites that are not involved. Based on the IDAAS, simulations were performed to investigate the deviation relative to the slant-to-vertical conversion (STV). The results indicate that the relative deviation induced by slant-to-vertical conversion may be significant in certain instances, and the deviation varies from 0% to 40% when the elevation decreases from 90° to 15°, while the relative IDAAS deviation is much smaller and varies from −5% to 15% without an elevation dependence. Compared with ‘true TEC’ map derived from the model, there is large difference in STV TEC map but no obvious discrepancy in IDAAS map. Generally, the IDAAS TEC map is much closer to the “true TEC” than is STV TEC map is.     

带弹性元件扑翼机构的动力学分析及实验

为研究扑翼飞行器传动机构的能量特性，以特拉华大学机械系统实验室所研制样机为原型进行了建模。引入气动项和拉力弹簧建立了完整的动力学模型。分析发现，气动项的力矩峰值为惯性项的4.8倍，对电机的转矩峰值的影响起主要作用。运用正交法进行仿真发现，引入拉力弹簧可以使电机转矩峰值最大降低77.5%，与理论分析相符合。进一步的物理实验验证了理论分析和仿真结果的正确性，并得到了当弹簧的连接点位置为185 mm、原长为200 mm及刚度为0.1 N/mm时实验结果取得最优值，可为扑翼机传动机构的优化设计提供依据。此外，引入弹性元件也可有效降低电机的转速波动，进而为仿生扑翼飞行器的生产和实践应用提供理论指导。     

Reanalysis of radiation belt electron phase space density using various boundary conditions and loss models

Data assimilation is becoming an increasingly important tool for understanding the near Earth hazardous radiation environments. Reanalysis of the radiation belts can be used to identify the electron acceleration mechanism and distinguish local acceleration from radial diffusion. However, for any practical applications we need to determine how reliable is reanalysis, and how significant is the dependence of the results on the assumptions of the code and choice of boundary conditions. We present the sensitivity of reanalysis of the radiation belt electron phase space density (PSD) to the assumed location of the outer boundary, using the VERB code and a Kalman filter. We analyze the sensitivity of reanalysis to changes in the electron-loss throughout the domain, and the sensitivity to the assumed boundary condition and its effect on the innovation vector. All the simulations presented in this study for all assumed loss models and boundary conditions, show that peaks in the phase space density of relativistic electrons build up between 4.5 and 6 R_E during relativistic electron flux enhancements in the outer radiation belt. This clearly shows that peaks build up in the heart of the electron radiation belt independent of the assumptions in the model, and that local acceleration is operating there. The work here is also an important step toward performing reanalysis using observations from current and future missions.     

CCSDS空间网络互联协议发展及启示

空间互联网将是由各种区域网构成的复杂异构网络,为了使其能够逐步实现自动化运行,网络效益得到最大程度的发挥,须做好网络互联的顶层规划与设计,并开发具体的标准技术.根据近年CCSDS (Consultative Committee for Space Data Systems,空间数据系统咨询委员会)发布的建议书,以及相关工作组的项目规划情况,介绍了SSI(Solar System Internetwork,太阳系互联网)体系结构、IPoC(IP over CCSDS space links,在CCSDS空间链路之上承载IP),以及DTN(Delay Tolerant Networking,容延迟网络)等标准项目.从CCSDS空间网络互联技术的发展历程不难得出结论:我国未来空间网络互联应注重区域网之间互联的顶层设计;区域网内部各子网之间的互联技术应选择以航天任务需求牵引为主;DTN将在区域网之间互联以及区域网从简单到复杂发展中都发挥重要作用.     

国内常用分散式数据采集器的性能介绍

介绍了三种数据采集器，并对其性能进行比较。     

测速元对弹道定位精确度的影响

对于弹道参数的数据融合问题,过去一般只考虑了多个测距元情况下,弹道位置参数精确度的改善.自从文[1]提出了测速定轨的原理和计算方法以及文[2]利用测速元诊断测距元的测量系统误差以后,使人们对测量系统中测速元的作用有了新的认识.讨论了在主体为测距元的测量系统中,若有一个或若干测速元,这些测量元素对弹道位置参数精确度的影响.结果表明测速元能显著提高弹道参数的精确度.     

基于Gauss-Newton法的L1数据拟合

在数据拟合中，当个别数据存在较大测量误差时，采用Ｌ１准则对数据进行拟合要优于最小二乘准则。本文通过建立Ｌ１准则与最小二乘准则之间的关系，给出了一种基于Ｇａｕｓｓ－Ｎｅｗｔｏｎ法的Ｌ１数据拟合自满。计算结果表明，该方法易于理解，便于编程，具有一定的理论意义和现实意义。     

卫星释放速度验证的数据分析方法

以神舟七号飞船释放伴随卫星为背景,重点研究卫星在轨释放速度的地面试验验证。提出了一种试验数据处理的方法,并详细分析了试验中可能产生的各种误差,将试验结果的偏差控制在±1%以内。根据伴随卫星实际运行数据,证明了地面试验分析方法的有效性。