基于VB6．0的飞机平尾液压作动筒位移传感器测试系统设计与开发

以用于飞机尾翼控制的液压作动筒位移传感器测试为例 ,介绍了其测试系统设计的方法 ,以及实际测试过程中需要注意的问题。利用VB高级语言编制界面及数据处理的优越性 ,结合C语言可对计算机底层硬件端口编程控制的优势 ,将两者有机地结合起来 ,实现了信号采集与数据处理的程序设计。该方法有较好的通用性 ,对其它测试系统的设计与开发具有一定的参考价值     

Sun 3/4专用协处理器PLC系统中Common Lisp编译器的代码优化措施

在简单介绍Sun3/4专用协处理器PLC系统及Common Lisp编译器后,着重讨论了Common Lisp编译器中的代码优化措施,包括优化无用代码、优化程序结构、优化转移指令、优化函数调用环境保存及恢复指令、优化寄存器分配、优化尾递归函数调用等。实例编译结果和模拟运行结果表明:与不经优化指令相比,经过优化后的指令代码长度平均减少25％,运行速度平均提高20％,为提高PLC系统的整体性能提供了一守的保证。     

一致性检验方法在导弹多惯组测量中的应用

传感器测量的准确与可靠是减小融合系统不确定性的前提,通过对多传感器一致性的检验,可以确定多传感器之间的测量误差,判断检测系统可靠性的程度。提出了应用概率距离测量对多传感器信息进行一致性检验的方法,并将此方法引入到基于多惯性测量组合的总线式导弹制导控制系统中。实例证明,该方法对于确保和提高测量导弹飞行信息的精度具有良好的效果。     

CCSDS图像无损压缩标准在恒速信道中的应用研究

在CCSDS建议的无损数据压缩的基本原理上 ,结合基于局域纹理特征的处理方法 ,给出数据输入输出在恒速信道条件下一种有效的面向空间应用的遥感图像无损压缩方案。该方案包括去相关处理、熵编码以及压缩缓存控制三部分。去相关操作是在局域纹理分析方法的基础上 ,通过提取两种有效的预测模型并自适应选择最佳的模型进行处理 ;然后采用快速有效的CCSDS熵编码器对最佳去相关模型的预测误差编码。在压缩方案中充分考虑了输入输出恒速信道条件下应用的特殊性 ,设计了相应的压缩码流控制方法 ,从而给出了一套有效的针对恒速输入输出信道条件下的图像无损压缩的应用方案     

Investigating gamma-ray burst data reduction techniques with Swift’s instruments

The amount of data on gamma-ray bursts (GRBs) and the detected afterglows observed by the Swift satellite contributed significantly to the understanding of the phenomenon. The behavior of the early afterglow rises some interesting questions. With the early afterglow localizations of gamma-ray burst positions made by Swift, the clear delimitation of the prompt phase and the afterglow is not so obvious any more. There are hints of a canonical X-ray afterglow lightcurve with segments of different slopes. Not all bursts necessarily show all the segments. It is important to see if the prompt phase and the afterglow has the same origin or they stem from different parts of the progenitor system. We will combine the of gamma-ray burst data from BAT and XRT and compare the extrapolated gamma-ray flux to the X-ray in a sample of bursts and find that there is a good agreement between the two measurements. This indicates that the physical process shaping burst and the early afterglow are the same.     

激光与热丝点火对多组分液滴着火及燃烧的影响

采用挂滴方法,实验研究多组分单液滴的着火和燃烧特性,考察激光和热丝两种点火方式对液滴燃烧速率、火焰形貌及着火延迟时间的影响.实验结果表明,随着热丝点火时间增加,燃烧速率因液滴周围自然对流增强而加快.常重力下液滴火焰为包覆型火焰,火焰高度与液滴初始直径之比的最大值约为18.当t/t_b>0.4时,尚处于热丝加热阶段的火焰高度比没有热丝加热的高约5D₀,比激光关闭后的火焰高度高5~10D₀.与热丝点火相比,激光点火响应迅速,对液滴附近气体干扰小,是地面上比较理想的点火方式.固定激光脉冲时间,随着激光强度的增加,单液滴的着火延迟时间缩短.     

柔性机械臂辅助空间站舱段对接阻抗控制

空间机械臂辅助舱段对接过程中存在测量与控制误差,易导致对接机构间存在较大接触力,传统FMA (Force MomentAccommodation)控制方法在测量接触力时无法消除大负载惯性力对测量的影响,且测量仪器的引入会进一步降低空间柔性机械臂的刚度。为此,文章提出了柔性机械臂辅助大负载空间舱段对接的阻抗控制方法,采用拉格朗日法推导了空间机械臂的关节输入力矩方程作为前馈输入,建立了含动力学前馈的空间机械臂阻抗控制程序,并以在商业软件ADAMS中建立的空间柔性机械臂与对接舱段组成的系统动力学模型作为控制对象,对系统进行ADAMS灢Matlab联合仿真。仿真结果表明,按照此控制方法,系统可克服外力干扰使目标解析点按照期望的方式运动;同时,通过测量机械臂关节运动参数即可实现对外力的准确感知,而不需额外添加力传感器,既消除了大负载惯性力对测量的影响,也不会导致柔性机械臂刚度的降低。     

Using TensorFlow-based Neural Network to estimate GNSS single frequency ionospheric delay (IONONet)

In the last 20?years, and in particular in the last decade, the availability of propagation data for GNSS has increased substantially. In this sense, the ionosphere has been sounded with a large number of receivers that provide an enormous amount of ionospheric data. Moreover, the maturity of the models has also been increased in the same period of time. As an example, IGS has ionospheric maps from GNSS data back to 1998, which would allow for the correlation of these data with other quantities relevant for the user and space weather (such as Solar Flux and Kp). These large datasets would account for almost half a billion points to be analyzed. With the advent and explosion of Big Data algorithms to analyze large databases and find correlations with different kinds of data, and the availability of open source code libraries (for example, the TensorFlow libraries from Google that are used in this paper), the possibility of merging these two worlds has been widely opened. In this paper, a proof of concept for a single frequency correction algorithm based in GNSS GIM vTEC and Fully Connected Neural Networks is provided. Different Neural Network architectures have been tested, including shallow (one hidden layer) and deep (up to five hidden layers) Neural Network models. The error in training data of such models ranges from 50% to 1% depending on the architecture used. Moreover, it is shown that by adjusting a Neural Network with data from 2005 to 2009 but tested with data from 2016 to 2017, Neural Network models could be suitable for the forecast of vTEC for single frequency users. The results indicate that this kind of model can be used in combination with the Galileo Signal-in-Space (SiS) NeQuick G parameters. This combination provides a broadcast model with equivalent performances to NeQuick G and better than GPS ICA for the years 2016 and 2017, showing a 3D position Root Mean Squared (RMS) error of approximately 2?m.     

PN码相位精确测量的累加最小二乘法

利用最小二乘（LS）法可以实现PN码相位的精确测量,但该方法对粗同步要求高,难以满足实际工程需求。给出了一种新的累加LS法的实现结构,在该结构下根据鉴相曲线的波形变化特征,利用累加后的离散鉴相曲线的最大值和最小值点作为特征基准点,取最值之间的数据进行LS线性拟合,实现粗同步于半个码元宽度以内的伪码相位精确测量。理论分析表明,该方法的鉴相特性呈线性特征,可以有效使用累加LS线性拟合方法。仿真结果表明,该方法相比于其他方法使用范围更广,测量精度更高。