New Cutting Force Modeling Approach for Flat End Mill

A new mechanistic cutting force model for flat end milling using the instantaneous cutting force coefficients is proposed. An in-depth analysis shows that the total cutting forces can be separated into two terms: a nominal component independent of the runout and a perturbation component induced by the runout. The instantaneous value of the nominal component is used to calibrate the cutting force coefficients. With the help of the perturbation component and the cutting force coefficients obtained above, the cutter runout is identified. Based on simulation and experimental results, the validity of the identification approach is demonstrated. The advantage of the proposed method lies in that the calibration performed with data of one cutting test under a specific regime can be applied for a great range of cutting conditions.     

Simulation and Analysis of Crashworthiness of Fuel Tank for Helicopters

Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks.     

Periodic Error Compensation for Quartz MEMS Gyroscope Drift of INS

In order to improve the navigation accuracy of an inertial navigation system （INS）, composed of quartz gyroscopes, the existing real-time compensation methods for periodic errors in quartz gyroscope drift and the periodic error term relationship between sampled original data and smoothed data are reviewed. On the base of the results, a new compensation method called using former period characteristics to compensate latter smoothness data （UFCL for short） method is proposed considering the INS working characteristics. This new method uses the original data without smoothing to work out an error conversion formula at the INS initial alignment time and then compensate the smoothed data errors by way of the formula at the navigation time. Both theoretical analysis and experimental results demonstrate that this method is able to cut down on computational time and raise the accuracy which makes it a better real-time compensation approach for periodic error terms of quartz micro electronic mechanical system （MEMS） gyroscope＇s zero drift.     

基于视线角序列的机动目标视线角速率计算

 依据拦截弹与机动目标间的相对位置关系,采用导引头球面模型,基于当前统计模型,实现了强跟踪状态自适应滤波,计算出了可用于制导的视线角速率。该算法利用导引头球面模型,将测角信息转换成距离信息,进行方差自适应调整和卡尔曼滤波。在只给出视线角序列信息的情况下,根据相对状态滤波结果求出所需的视线角速率。     

阻力伞附加质量与阻力系数修正方法

在阻力伞试验,特别是高速滑车试验过程中,由于阻力伞系统作非匀加速的非定常运动以及前置体尾流场的影响,现有的阻力伞试验数据计算方法已经难以准确计算其阻力系数.本文针对阻力伞试验过程中的这种非定常运动和尾流干扰特性,对阻力伞系统进行了动力学分析,并对阻力伞非定常运动过程中的附加质量和尾流场特性进行了理论研究,提出了阻力伞双...     

低轨道卫星GPS精密定轨动力学方法的研究

结合低轨卫星简化动力学定轨算法,以及不同几何信息精度条件下的纯几何定轨和动力定轨精度比较,定量分析星载双频GPS实现精密定轨过程中的主要因素,得到星载GPS接收机性能设计所需的关键技术指标,为卫星精密定轨系统的顶层设计提供了科学合理的参考依据。     

基于磁路法与等效热网络法的航天 永磁同步电机设计与仿真

针对航天永磁同步电机方案初步设计耗时长、过度依赖商业软件的问题,基于磁路法和热网络法,提出了一套方案设计阶段航天永磁同步电机磁热性能快速预估与仿真方法。给出了定子内径、定子外径、铁芯长度、匝数等关键参数的取值准则,建立了包含36个节点集总参数热网络模型,并以端部绕组为例给出了热平衡方程的详细推导过程。通过与成熟商业软件对比,其电磁计算最大误差出现在电流有效值上,偏差值为607%;与样机实测值对比,绕组温升最大误差为73%,满足方案设计阶段预示精度要求,为方案设计阶段航天永磁同步电机快速性能预估提供有力支撑。     

组织管理的系统思维

系统是由相互关联的元素组成的整体。系统思维(Systems Thinking)是一种以整体观点观察事物的方式。基于工程原理和法则的定量化模型方法在管理领域的应用,因为人的动机和行为的复杂性而受到了限制。综合集成是具有系统思维的管理者对现实问题的不同诠释,是认识和解决管理复杂性问题的有效方法。     

重力空射稳定伞阻力特征自动化设计

为进行重力空射稳定伞的初步设计,文章以多体动力学软件(ADAMS)为二次开发平台,构建了重力空射箭-伞系统的动力学仿真模型;推导了火箭和稳定伞的气动模型,并利用动态链接子程序实现了气动力的加载;通过ADAMS命令语言建立了参数化模型和用户界面。在此基础上,自编可行方向优化算法实现了稳定伞阻力特征的自动化设计。最后,根据仿真计算结果对试验火箭出舱时间、安全通道、回收方式等问题进行了分析,为后续空射稳定伞的细节设计以及空射总体方案的确定提供了参考。     

永磁约束电子束轨迹实验研究

通过设计并运用一种直流电子束轨迹简易测量方法,开展了永磁约束电子束轨迹实验研究,得到了永磁铁环对60~80 ke V电子束约束作用的实验数据。结果表明:该测量方法方便有效,结果较为准确;永磁铁对电子束聚焦作用明显,并呈现出一定的规律性。对永磁铁约束电子束研究工作奠定了基础。