系列图象分析和三维目标参数提取技术

系列图象分析是很有前途的崭新学科。本文把分析技术分成光流分析法和几何分析法两大类。在论述两类分析技术的基础上,重点研究了如何检测流速、提取三维几何参数和运动参数以及如何恢复物体的结构,也涉及到三维目标识别问题。文内比较详细地研究了线性的算法,并且提供了已经实现过的某些实验方案和结果。还提出了新方案,即“通用系列图象分析和三维目标参数自动探测装置”。最后,对发展趋势作出了估计,认为系列图象分析技术正朝着理论的完备性和应用的现实性推进。     

自适应预测补偿的迭代制导方法及其应用研究

针对迭代制导完成后入轨参数或终端程序角修正问题,研究一种基于模型参考的自适应预测补偿迭代制导算法在运载火箭上的应用。该算法在经典迭代制导算法的基础上,根据预测的迭代终端程序角和飞行视加速度的参考模型,对关机点参数进行补偿,依据补偿后的终端指标重新规划飞行轨迹,进而得出满足入轨参数或终端程序角偏差修正的制导指令,提升迭代制导对入轨参数偏差或终端程序角的修正能力。此外,阐述了经典迭代制导的基本算法,概括了自适应预测补偿迭代制导算法的基本原理,并以大推力直接入轨、终端程序角大偏差以及满足终端程序角约束为例,给出相应工况的自适应预测补偿的迭代制导算法。仿真结果表明：该算法对入轨参数和终端程序角偏差具有一定的修正能力。     

基于改进PSO算法的PID控制器参数优化

针对PID控制器参数设计问题,提出了一种基于改进PSO算法的优化方法。该方法将初始的粒子群分成两组搜索方向相反、相互协同的主、辅子群,在保持种群小规模情况下,增强算法全局探索能力,实现高精度的优化结果。仿真结果表明,该方法相比于传统算法,所得到的控制器参数使控制系统获得了更好的动态响应特性和满意的控制效果。     

空间推进系统铝合金组件激光焊阈值特性

为解决空间推进系统直属组件轻量化需求,对新采用的铝合金材料进行了激光焊阈值特性研究。结果表明,铝合金激光焊阈值区间与焊接速度和离焦量的绝对值正相关,但正向变化幅度远低于不锈钢、镍合金和钛合金等材料。对于光束质量不同的激光焊机来说,光束的焦斑直径越小,实焦焊时阈值区间越低;光束的发散角越小,相同离焦量下阈值区间越低。在-12°～12°内,铝合金激光焊阈值区间与入射角无关。保护气的吹送方向和吹送速度基本不改变铝合金激光焊的阈值区间,此特性与不锈钢等材料略有区别。     

用CT值推导人体组织属性参数的方法及改进

蒙特卡罗方法是计算精度最高的人体组织剂量计算方法。常见的蒙特卡罗模拟程序,如M CNP,EG S4等都自带了各种介质的截面数据,而剂量计算的一个重要步骤就是得到人体组织的属性参数——质量密度和化学组成。本文主要介绍了两种根据医学影像CT值推导人体组织属性参数的方法——区间法和两分法,并经过分析比较认为两分法比区间法具有更高的精确度和可行性。同时,针对两分法存在的不足和缺陷,本文将CT值全范围划分为七段,根据两分法的假设条件假设每一段均由两种不同的人体组织混合而成。在每一段CT值范围内,人体组织的质量密度和化学组成通过对两种假定物质参数的拟合得到。结果说明该方法所得到的人体组织属性参数完全可以满足蒙特卡罗人体组织剂量计算的要求。     

环境参数对飞机防冰热载荷的影响规律

为在飞机热气防冰系统设计过程中准确计算防护表面的防冰热载荷,以某飞机翼段模型为例,对防冰热载荷计算开展了研究,给出了计算流程,研究了来流速度、高度、温度、液态水含量和水滴直径等环境参数变化对翼段表面热载荷分布规律的影响.研究结果表明:①热载荷主要分布在机翼前缘,且越靠近翼尖部分热载荷数值越大,热载荷曲线呈现中间低两边高...     

一种仿蜜蜂类昆虫扑翼悬停控制的仿真估算研究

基于准稳态气动力模型,推导了仿蜜蜂类昆虫扑翼气动力和力矩估算公式,建立了扑翼运动函数.将仿蜜蜂类昆虫扑翼视为空间运动刚体,在其动力学方程基础上,采用分层控制策略研究悬停控制问题.外层为位置控制,X和Y位置应用PD控制算法,Z位置应用切换控制方法;内层姿态控制采用切换控制方法,并选择了一套机翼运动参数用于切换控制.最后进行了仿蜜蜂类昆虫扑翼悬停控制仿真试验,试验结果表明所设计的控制策略是有效的,一旦昆虫扑翼受到干扰偏离平衡位置后,通过自动调节能够回到平衡位置附近.      

基于模糊粗集的航空发动机特征参数提取算法

提取发动机性能状态的特征参数,是提高发动机故障识别正确率和可靠性的必要条件.针对实际航空发动机故障参数所具有的模糊和连续性特点,提出了一种基于模糊粗糙集的特征参数提取算法,并应用到某型航空发动机故障识别.研究结果表明:属性约简的核则为导致发动机故障的特征参数,以此特征参数进行故障诊断,可保证较高的诊断精度;同时,该算法的抗干扰性提高了整个系统故障识别的正确率.该算法可用于航空发动机故障分类、故障诊断以及状态监控.      

Influence of welding parameters on microstructure and mechanical properties of electron beam welded Ti60 to GH3128 joint with a Cu interlayer

Effects of welding parameters on the microstructure and mechanical properties of Ti/Cu/Ni joint welded by electron beam were investigated. High welding heat input increased the melting quantity of Ti60 titanium alloy and promoted the formation of Ti–Cu intermetallic compounds (IMC) such as Ti₂Cu and Ti₃Cu₄, increasing the brittleness of the joints. Low welding heat input was not conducive to the complete melting of the copper interlayer, and the unmelted copper reduced the performance of the joints. Under the optimal welding parameters, Ti–Ni IMCs in the weld would be replaced by (Cu, Ni) solid solutions ((Cu, Ni)_ss). However, Ti–Cu IMC layers cannot be eliminated entirely by changing the welding parameters. The maximum tensile strength of the joints was 201 MPa. The fracture of the joints occurred at the Ti–Cu IMC layer, which was a typical brittle fracture.     

Orbit determination of BeiDou navigation satellite system maneuvered satellites based on instantaneous velocity pulses parameters

The BeiDou navigation satellite system (BDS) comprises geostationary earth orbit (GEO) satellites as well as inclined geosynchronous orbit (IGSO) and medium earth orbit (MEO) satellites. Owing to their special orbital characteristics, GEO satellites require frequent orbital maneuvers to ensure that they operate in a specific orbital window. The availability of the entire system is affected during the maneuver period because service cannot be provided before the ephemeris is restored. In this study, based on the conventional dynamic orbit determination method for navigation satellites, multiple sets of instantaneous velocity pulses parameters which belong to one of pseudo-stochastic parameters were used to simulate the orbital maneuver process in the orbital maneuver arc and establish the observed and predicted orbits of the maneuvered and non-maneuvered satellites of BeiDou regional navigation satellite system (BDS-2) and BeiDou global navigation satellite system (BDS-3). Finally, the single point positioning (SPP) technology was used to verify the accuracy of the observed and predicted orbits. The orbit determination accuracy of maneuvered satellites can be greatly improved by using the orbit determination method proposed in this paper. The overlapping orbit determination accuracy of maneuvered GEO satellites of BDS-2 and BDS-3 can improve 2–3 orders of magnitude. Among them, the radial orbit determination accuracy of each maneuvered satellite is basically better than 1 m. simultaneously, the combined orbit determination of the maneuvered and non-maneuvered satellites does not have a great impact on the orbit determination accuracy of the non-maneuvered satellites. Compared with the multi GNSS products (indicated by GBM) from the German Research Centre for Geosciences (GFZ), the impact of adding the maneuvered satellites on the orbit determination accuracy of BDS-2 satellites is less than 9 %. Furthermore, the orbital recovery time and the service availability period are significantly improved. When the node of the predicted orbit is traversed approximately 3 h after the maneuver, the accuracy of the predicted orbit of the maneuvered satellite can reach that of the observed orbit. The SPP results for the BDS reached a normal level when the node of the predicted orbit was 2 h after the maneuver.