小卫星非常规动力学分析与控制

针对小卫星研制中出现的一些非常规动力学问题进行研究,并提出解决办法。针对小卫星组件最大冲击谱量级超出常规冲击试验规范谱的分析与验证困难,通过研究提出了能够分析评估组件高量级冲击的方法。针对小卫星随机振动下强度设计方法还存在较大误差,分析了系统模态质量比与模态频率在一定频段的影响规律,认为忽略模态质量耦合会带来误差,提出了考虑模态质量耦合的准静态载荷计算方法。最后,针对小卫星整星开展了减振研究,分析了正弦和随机减振效果,对于对称安装减振系统,提出了减振系统的主频率计算公式。     

2 AU以内的“渐进型”太阳高能粒子事件模拟

太阳高能粒子（Solar Energetic Particle,SEP）事件是影响地球空间以及深空辐射环境的主要因素之一。“渐进型”太阳高能粒子事件中的高能粒子主要来自于日冕物质抛射（Coronal Mass Ejection,CME）所驱动的激波扩散加速（Diffusive Shock Acceleration,DSA）过程。CME驱动的激波在行星际的传播过程中,其结构不断演化,进而影响到高能粒子的加速过程。本文利用二维太阳高能粒子加速和传播模型,对发生于2014年4月18日的太阳高能粒子事件实例进行了数值模拟。模型考察了黄道面上2 AU的距离以内包含地球所在位置的4个不同点,分别计算了每个点上高能粒子的通量。数值模拟的结果表明：黄道面内不同位置的观察点,与激波波前的磁力线连接不同,从而导致观察点处高能粒子的通量有着显著的差异。该模型的计算结果可以为深空探测计划开展辐射环境研究提供必要的输入。     

SiC/CVD SiC复合涂层的抗氧化及抗热震性能研究

为了提高C/SiC复合材料耐高温性能,采用泥浆浸渍裂解与真空化学气相沉积(CVD)在材料表面制备了SiC/CVD SiC复合涂层,通过XRD、SEM分析了涂层组成与结构;研究了复合涂层的高温抗氧化(700～1 500℃)和抗热震性能。结果表明,泥浆浸渍法制备的SiC涂层具有一定的封孔效果,可使材料开孔率下降,但高温抗氧化效果并不佳,1 200℃氧化10 min后材料弯曲强度保留率下降明显仅有86%。CVD SiC涂层结构致密,与SiC封孔涂层结合较好,在700～1 500℃具有较好的抗氧化效果,随着氧化温度的升高,氧化后涂层完好,表面O元素逐渐增加,材料失重率缓慢增加但不大于0.5%,且材料性能并未下降。涂层材料在1 200℃-10 min短时热震5次后材料弯曲强度保留率仍有95%以上,且未出现开裂、剥落等热震损伤。在1 200℃-30 min长时热震10次后,涂层材料基本被完全氧化,材料失去保护作用,弯曲强度下降至90%左右。     

Injection of 40-kHz-modulated electron beam from the satellite: II. Excitation of electrostatic and whistler waves

Beam-plasma interaction effects are studied during the active space experiment with electron and Xe-ion beam injections in an ionospheric plasma. Permanent 40-kHz-modulated electron beam injection occurs simultaneously with a xenon-ion beam injected by the Hall-type plasma thruster operating in a square-pulse mode (100/50 s for a job/pause duration). The unusual behavior of the background charged particle fluxes and wave activity stimulated during the beam-plasma interaction have been registered by the scientific instruments onboard Intercosmos-25 station (IK-25) and Magion-3 subsatellite. The longitudinal and electromagnetic wave instabilities and their mutual relationship are considered in order to explain the observed effects. The excitation of electrostatic waves by the electron injection has been considered for different resonance conditions near the linear stability boundary. Beam-driven electromagnetic instability is responsible for the backward-propagating whistler waves excited via cyclotron resonance. Competition of these two beam instabilities is one of the subjects of the present study.     

Case study of inclined sporadic E layers in the Earth’s ionosphere observed by CHAMP/GPS radio occultations: Coupling between the tilted plasma layers and internal waves

We have used the radio occultation (RO) satellite data CHAMP/GPS (Challenging Minisatellite Payload/Global Positioning System) for studying the ionosphere of the Earth. A method for deriving the parameters of ionospheric structures is based upon an analysis of the RO signal variations in the phase path and intensity. This method allows one to estimate the spatial displacement of a plasma layer with respect to the ray perigee, and to determine the layer inclination and height correction values. In this paper, we focus on the case study of inclined sporadic E (E_s) layers in the high-latitude ionosphere based on available CHAMP RO data. Assuming that the internal gravity waves (IGWs) with the phase-fronts parallel to the ionization layer surfaces are responsible for the tilt angles of sporadic plasma layers, we have developed a new technique for determining the parameters of IGWs linked with the inclined E_s structures. A small-scale internal wave may be modulating initially horizontal E_s layer in height and causing a direction of the plasma density gradient to be rotated and aligned with that of the wave propagation vector k. The results of determination of the intrinsic wave frequency and period, vertical and horizontal wavelengths, intrinsic vertical and horizontal phase speeds, and other characteristics of IGWs under study are presented and discussed.     

Analytical Calculation Model for Mach Wave Parameters

When a wave shaper is embedded in a liner,Mach wave will emerge above the liner,which affects the head shape of an explosively formed projectile.Mach wave parameters,including radius and pressure need to be determined to effectively match Mach wave with the liner,so that a good head shape can be obtained.An analytical calculation model for Mach wave parameter is presented based on three-shock theory,and the theoretical values agree well with the experimental ones.The analysis shows that when the radius of the wave shaper is constant,the radius of the Mach wave increases,whereas the pressure decreases while increasing the distance between the liner and the wave shaper.When the distance between the liner and the wave shaper is constant,the radius of the Mach wave increases,whereas the pressure decreases when decreasing the radius of the wave shaper.     

中心锥对旋转爆轰发动机内外流场影响的三维数值模拟研究

为探究中心锥对旋转爆轰发动机(Rotating Detonation Engine,简称RDE)内外流场结构与推进性能的影响,本文设计了90°、60°、45°、30°、20°、14°锥角与无中心锥7种构型,对燃烧室内径为78mm、外径为88mm、长度为100mm的RDE进行三维数值模拟,推导了适用于带中心锥RDE的推力公式,获得了各构型下详尽的流场参数。结果表明：在本文构型下中心锥对内流场影响很小,各构型的内流场参数与结构基本一致;中心锥对外流场的爆轰产物有轴向加速与径向吸附作用,能够调控尾部区域的流场特性;中心锥对由压差项产生的推力具有显著的提升效果,最佳推力性能出现在20°中心锥构型中,RDE总推力增益达22.8%。研究结果揭示了中心锥对RDE推力影响的作用机理,阐明了锥角对推进性能的影响规律,对带锥形构型的尾喷管设计工作提供了参考。     

Plane wave spectrum and boresight error of radome-enclosed antennas

Ａｉｒｂｏｒｎｅｒａｄｏｍｅｍａｙｉｎｔｒｏｄｕｃｅｓｉｇｎｉｆｉｃａｎｔｐｅｒｆｏｒｍａｎｃｅｄｅｇｒａｄａｔｉｏｎｔｏａｎｔｅｎｎａａｎｄｒａｄａｒｓｙｓｔｅｍｓ,ｅｖｅｎｉｆｄｅｓｉｇｎｅｄｅｌａｂｏｒａｔｅｌｙ．Ｓｉｎｃｅｒａｄｏｍｅｉｓａｄ...     

A参量在高频阻抗测量中的应用

根据微波网络理论提出了利用A参量求解高频阻抗的新方法,并将其应用于网络分析仪系统,对短波阻抗进行了测量。实践证明,该方法与传统的利用S参量的方法(利用反射系数)相比大大地拓宽了阻抗测量范围,在通用仪器上获得了比专用仪器高的测量精度,同时还解决了网络分析仪与非同轴网络的连接问题。     

具有无源控制空腔时正激波/湍流附面层干扰的数值模拟

采用雷诺平均N-S方程和B/L代数湍流模型计算了具有无源控制空腔时正激波/湍流附面层干扰流场。计算与实验结果的比较表明,本文方法可较准确地预测激波结构、激波与附面层干扰区流动基本特征及波后流动分离状态、激波位置、波前马赫数等参数。