基于DSP的感应同步器测角系统的设计与实现

本文介绍了一种基于DSP的感应同步器测角系统的设计与工程实现,其核心是角位置的数据变换及编码部分.该设计提高了测角系统的性能,特别是大幅度地提高了位置测量的分辨率和精度.     

射频阵列仿真系统的目标位置精度分析

射频阵列仿真系统是一种比较理想的导弹武器系统抗干扰试验环境,目标位置精度是射频阵列仿真系统的关键指标。阐述了影响目标位置精度的主要原因,并结合测量数据对其进行分析,为工程应用提供了参考。     

工程方法确定翼面载荷研究

提供一种使用翼面载荷测试的弯、扭矩确定气动载荷分布的工程方法。实例表明这种方法是一种比较简单易行的方法,可以得到工程上较为满意的结果。可供强度工作者参考使用。     

Comparison of peak characteristics of F2 ionospheric layer over Tehran region at a low solar activity period with IRI-2001 and IRI-2007 models predictions

In the present work values of peak electron density (NmF2) and height of F2 ionospheric layer (hmF2) over Tehran region at a low solar activity period are compared with the predictions of the International Reference Ionosphere models (IRI-2001 and IRI-2007). Data measured by a digital ionosonde at the ionospheric station of the Institute of Geophysics, University of Tehran from July 2006 to June 2007 are used to perform the calculations. Formulations proposed by  and  are utilized to calculate the hmF2. The International Union of Radio Science (URSI) and International Radio Consultative Committee (CCIR) options are employed to run the IRI-2001 and IRI-2007 models. Results show that both IRI-2007 and IRI-2001 can successfully predict the NmF2 and hmF2 over Tehran region. In addition, the study shows that predictions of IRI-2007 model with CCIR coefficient has closer values to the observations. Furthermore, it is found that the monthly average of the percentage deviation between the IRI models predictions and the values of hmF2 and NmF2 parameters are less than 10% and 21%, respectively.     

Understanding magnetotail current sheet meso-scale structures using MHD simulations

Recent Cluster observations have strongly supported the existence of meso-scale structure in the magnetotail current sheet. In our study, a magnetohydrodynamic simulation event study exhibited current sheet behavior comparable to that seen in the Cluster observations. Geotail and DoubleStar observations also show that the simulation is providing a realistic representation of the magnetosphere during the period of interest; that is, when the current sheet evidently becomes bifurcated. The magnetohydrodynamic simulation allows us to place the local observations into a global contest. It shows that the observations can be explained in terms of localized reconnection tailward of the Cluster location and the formation of a flux rope nearby. The simulation also features wave-like structure across the current sheet.     

基于Kriging模型插值的孔位修正策略

飞机装配时的孔位精度直接影响其最终装配质量，而待制孔零件易发生变形和整体偏移，因此一般通过基准孔信息对待制孔位进行补偿。提出一种基于Kriging插值的孔位修正方法，通过基准孔建立孔位理论坐标与实际偏差值的Kriging模型，进而预测待制孔的孔位偏差，并给出每个位置的预测标准误差，以指导基准孔的增添和布置。最后通过有限元和数值实验分别验证了零件在极限变形和整体平移旋转情况下该方法的有效性，实现了孔位估计误差小于0.3 mm。     

航空器失事时搜寻区域的确定方法

提出根据航空器失事时最后已知的报告或其它位置信息建立最初的搜寻范围，确定第一和第二优先搜寻区的方法，及在无法搜寻找到飞机残骸或幸存者时搜寻区域的扩大广泛和调整方法。确定了划分搜寻区域的指导方针，以及在受天气情况、地形和海流影响时，确定搜寻区的具体调整方法。     

歼×飞机攻角位置误差校准的试验研究

本文简述了目前歼×飞机的攻角位置校准的试验方法。通过分析比较 ,认为采用微波空间定位校准法进行攻角位置误差校准优于目前风洞试验校准法     

3-D position estimation of isolated target and optimal trajectory choice in parasitic synthetic aperture radar

Bistatic SAR (BSAR) systems have recently been the subject of several studies, but little attention has been given to the potential of the location of targets. In the paper, the performance of the estimation of 3-D position of a target (TPE) in parasitic SAR is obtained analytically and illustrated by computer simulation using ambiguity function analysis, and the maximum likelihood estimate (MLE) approach. It was shown that by using a multi look parasitic BSAR all three coordinates of an isolated point target (IPT) could be evaluated. Analytical closed form equations that characterize the measurement accuracy were derived. In the final these equations will be used to demonstrate various cases of more practical, including optimal trajectories choice under any geometry configuration case, moreover, the conclusion is verified via Matlab.     

弹性飞行器敏感元件位置设置与参数优化综合

本文研究了弹性飞行器敏感元件位置的设置问题，分析了敏感元件位置对弹性飞行器稳定性的影响，提出了几类飞行器自动驾驶仪敏感元件可能合适位置的选择准则。从飞行器弹性振动闭环系统方程出发研究了弹性飞行器参数优化综合的某些方法。通过算例得到控制系统返馈系数，陀螺位置，舵面位置优化综合的数值模拟结果。这些结果与该飞行器实际采用的值符合较好。